Ohaus DFD32M2500ER Defender 3000 Drum Floor Scale, 2500 lb., 0.5 lb.

This listing is for the Waters Acquity UPLC H-Class bio systemThis system is in good working conditi (more)on and is being sold with all parts included in the photos, all cables and software included for this system to run.Whats included PDA DetectorBioSample ManagerBioQuaternary Solvent ManagerColumn HeaterSolvent RackPC with Empower softwareThe Waters Acquity H-Class Bio UPLC System is a low- dispersion, high-pressure quaternary LC system that contains an inert flow path that, when combined with four-solvent mixing and auto blend Plus technology, facilitates easy buffer preparation without pH adjustment. Conquer Scientific offers a wide variety of module customization

Labconco Mini Stoppering Chamber For use with a FreeZone™ Freeze Dry System Accommodates 48  (more)serum vials of 2mL and 8 serum vials of 30mL After lyophilization, vials can be stoppered while still under vacuum Stoppering travel distance: 0.5 in. (1.3cm) For vials ranging in height from 1.38 to 2.48 in. (3.5 to 6.3cm) Comes with tray for loading and unloading of samples INCLUDED: The Labconco 7569000 Mini Stoppering Chamber includes: - 17" of Clear PVC Tubing - Spacers & Adapters for Connection to Port - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The world's first patented Tube Mill control is a batch mill with disposable grinding chamber. Elimi (more)nates possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.- Clearly arranged, multilingual OLED-display- Timer, adjustable from 5 s to 3 min- USB interface for control and documentation of all the parameters- Interval operation available- Infinitely variable speed from 5000 to 25000 rpm- Various operating modes- Adjustable safety speed- Adjustable safety time- Programmable and storable test conditions- Error Code Display- Reproducible test results- Easy operation with touch keypad- Dust proof sealedWeight - 5KGDimensions - 35cmL x 26cmW x 46cmH

Dimensions (HxWxD): 650 x 565 x 486 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Particle counter for liquids from Malvern, type Mastersizer 2000. The Mastersizer 2000 measures the  (more)particle sizes in a sample and the proportions and displays them on the computer in a graph, the measurement is done by the particles passing between detectors and a laser. Particle size: 0.02 µm to 2000 µm Lasers: Red: HeNe gas laser with a wavelength of 633 nm Blue: LED, Wavelength: 466nm Dimensions (WxDxH): 1330 x 300 x 400 mm Equipped with a Hydro 2000G cell but without the dispersion unit. Software with recommended version.

Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System Collector Temperature -85 (more)°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. The included Edwards RV8 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System includes: - Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz - Edwards RV8 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Dry Block Heater 1 Dry block heater, 1 block Number of Blocks 1 Block Heating Temp. Range Room T (more)emp. +5°C to 120°C Setup Plate Material Aluminum Features - Stepless adjustable temperature up to 120 °C - Timer: Countdown, adjustable from 1 min to 99h 59min - Counter: Display of heating time - Highly versatile with a large number of blocks - Error code display - Fixed safety circuit - Acoustic signal at end of test Digital block heater for three aluminum blocks provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media test, coagulation test, blood-urea-nitrogen determination and in situ hybridizations.INCLUDED: The IKA Dry Block Heater 1 Dry block heater, 1 block includes: - Dry Block Heater 1 - Block remove tool - PT 1000.60 Temperature sensor, stainless steel - Two Year Manufacturer's Warranty

Temperature range: -5°C to -35°C Net Content: 432 L (gros content: 600 liter) Dimensions (WxDxH): 83 (more)7 x 756 x 2273 mm Weight: 152 kg Explosion proof Possible options can be ordered at extra cost (see image)