Agilent Rotor seal, Vespel, for p/n 0101-0920 valve / 0100-1855

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM This was removed from a university lab  (more)where it was surplus to requirements. The gate fully opens and closes, rubber seal still present. It is in good cosmetic condition with marks from use.

Dynamotive Bleed Valve Drive Cabinet Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition, we are unable to power it on or test it further at our facility. There is what appears to be a 3-phase cable outside of the unit, but it is not connected anywhere inside the unit, it has been cut. The components inside are untested but seem to be in good condition Therefore, it is listed as Spares/Repair. Includes a box of 3 x replacement fuses The key is not included but can be opened with a standard control cabinet key.

Labconco Clear Chamber with 8Valves, Short, 12.0 " dia. x 15.3 " h12.0"diameter acrylic chamber for  (more)all FreeZone Freeze Dryers. Provides visibilityfor bulk freeze drying. Accommodates Short Product Shelves (7317100). Includesaluminum lid with eight neoprene valves with plastic knobs for use with both1/2" and 3/4" adapters, cap for vacuum port and pass through forelectrical cords. 8" diameter opening to collector on bottom of chamber.Will fit 10.12" or 14.0" diameter condensers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk. 12.0 in. dia. acrylic chamber for all FreeZone™ Freeze Dryers Provides visibility for bulk freeze drying Accomodates Product Shelves (3 shelves) 7317100 Includes aluminum lid with 8 neoprene valves with molded plastic knobs & one pass-through for electrical cords For use with 1/2 in. & 3/4 in. adapters Will fit 10.12 in. or 14.0 in. diameter condensers 8 in. diameter opening to collector on bottom of chamber INCLUDED: The Labconco 7318802 Clear Chamber with 8Valves, Short, 12.0 " dia. x 15.3 " h includes: - Aluminum Lid with 8 Neoprene Valves (For use with 1/2" & 3/4" adapters) - Vacuum Port Cap - Pass Through for Electrical Cords - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -84C Console Freeze Dryer with PTFE coil and collector, Purge Valve Features -  (more)Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large samples loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryers such as the FreeZone StopperingTray Dryer (pump and tray dryer sold separately). These models offer a broadrange of built-in options including a purge valve and mini chamber. The uprightstainless steel collector coil holds 6 liters of ice before defrosting. Two 1/3hp HCFC/CFC-free refrigeration systems cool the collector to -84C (-119F),suitable for low eutectic point samples including acetonitrile. Lyo-Works™ OSprovides a real time display of collector temperature, vacuum level andoptional End-Zone™ end point detection system, shown on a 5" full color,capacitive touch screen. Models with PTFE-coated collectors that can withstandcorrosive compounds are available.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Internal coil maximizes vapor-trapping efficiency Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 710612100 FreeZone 6L -84C Console Freeze Dryer with PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

LAUDA LOOP: Compact circulation thermostat for constant temperature applications from 4° to 80°C Ove (more)r a two-year period of intensive research and development, LAUDA has reinvented Peltier technology. Based on this proven technology, LAUDA LOOP, a new type of unrivaled thermoelectric circulation thermostat, has been developed. The positive response from industry customers confirms that the design of a location-independent, space-saving and environmentally friendly temperature control meets the growing demands of modern work processes in terms of flexibility, independence and versatility. A practical, lightweight tool with a smart design for all types of applications. The two versions: LOOP 100 and LOOP 250 The two types of air-cooled devices, L 100 and L 250, provide cooling capacities of 120 and 250 Watts and a heating power of 0.2 and 0.4 Kw. The focus is on applications that require a constant temperature with low energy consumption. Both types of devices are exceptionally efficient in part load operation. Notable features - Small size, low weight - Thermostating with temperature control without refrigerants thanks to Peltier technology - Electrically adjustable fan - Exceptionally energy efficient in part load operation - 3 button control with OLED display - Voltage: 100-240V, 50 / 60Hz - RS 232 interface as standard - Very quiet and barely perceptible vibrations - Under / over temperature alarms Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections. Simple control panel with large TFT display with extensive information; easy to navigate and change settings. Tank cover elegantly hidden and protected in the structure of the instrument. Serial connection on the back: RS232; pump outlet and inlet connections. Chart of the LOOP LAUDA pump characteristics and the two LOOP LAUDA models available. 1 - Controller with temperature display and control buttons (soft buttons) 2 - Cover over the tank lid 3 - Ventilation openings 4 - 4 feet 1 - Ventilator fan on the underside. - The device sucks up fresh air from below! a. - Tank with filler nozzle and cover 1 - Pump connection IN inlet (back from consumer) 2 - Pump connection OUT outflow (to consumer) 3 - RS 232 interface (socket) 4 - Device panel plug 5 - Box for 2 safety fuses 6 - Mains switch 7 - Rating label

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Leitz Dialux 20 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit powers up and is in good cosmetic condition but has some marks from use. Included with it are; 5 x Objectives Leitz Wetzlar 160/0.17 50/1.00 W Fluoreszenz Leitz Wetzlar 160/- EF 10/0.25 (519760) Leitz Wetzlar 160/0.17 NPL Fluotar 40/0.70. PHACO 2 Leitz Wetzlar 160/0.17 NPL Fluotar 25/0.55. PHACO 2 Leitz Wetzlar 160/0.17 NPL Fluotar 100/1.32 OEL PHACO 3 Leitz 465 Power Supply WILD MPS 51 S Camera-Not tested as the necessary cables are not provided.

Jun-Air Oiless Piston Air Compressor OF301-4B This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in working order. It is supplied with a manual. It is ing good cosmetic condition with minor marks.

F1 Mass Standard - monoblock weights without adjustment chamber. Nominal value - 2 g.