Waters Acquity UPLC H-Class bio system

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

The Alltech 2000ES ELSD Evaporative Light Scattering Detector is designed for the detection of diffi (more)cult samples and is an indispensable tool for drug discovery, complementing data from UV/Vis and MS. Offering lower detection limits, the 2000ES ELSD features two operating modes for optimum performance for all applications. The ELSD 2000ES offers the choice of splitting or not splitting, giving you optimum sensitivity for every application. Light Source: Laser diode with collimating optics, 650nm, 30mW output, class IIIB Detector Element: Silicon photodiode Temperature Range: Ambient to 120°C in 1°C increments Nebulizer Gas: Nitrogen preferred Inlet Pressure: 60 to 80psig Typical Operating Range: 1.0 to3.0L/min Flow Control: Digital mass flow control Mobile Phase Flow Rate: To 5.0mL/min Analog Output: 1V or 10mV full scale Dimensions (h x w x d): 585mm x 315mm x 550mm Weight: 16Kg 230V / 50-60Hz

S+B Wall cabinet DD D.Grey 1200

Usage: Low to medium speed homogenization of high solids in medium to high viscosity liquids. Downlo (more)ad the data sheet for more information.

Circulation chillers for reliable continuous operation in laboratory and research applications from  (more)-10 to 40°C The LAUDA Microcool line, simple, easy to use, consists of four compact models with large LED display and membrane keyboard, which offer cooling capacities from 0.25 to 1.2 kW. The strong point of these devices is the high-quality centrifugal pump with magnetic coupling - unique on the market for this price category: the magnetic coupling of the pump and the electric motor prevents any kind of sealing problem on the pump shaft. The MC 250 and MC 350 models easily fit on a laboratory bench. Larger models MC 600 and MC 1200 with 600 and 1200 watts of cooling capacity are also available, which can be placed on the floor or under a laboratory bench to save space. In addition, the MC 1200 W, the most powerful device, is also available in a water-cooled version. Notable features - Auto start timer and auto power off function - Top filling opening, drain connection on the back - Cooling capacity adapted via solenoid valve control, including automatic compressor control Examples of specific applications - Rotary evaporators - Distillation systems - Spectrometers - Supply of cooling traps - Digital print - Laser cut - Spot welding - Injection molding - Tunnel drilling machines - Centralized cooling water supply Accessories included Nozzles for pump connections; screw cap Performance graph of the pump of the LAUDA Microcool CHILLER. Simple three button control panel, with display and three LED indications: heat transfer liquid required; active cooling unit; device error. Connections on the back of the Microcool: RS232; drain screw; external alarm output. Connections on the back of the Microcools: inlet/outlet pump connection; overflow connection. Front liquid level indicator. Front cover for filling. Front panel of the Microcool LAUDA easily removable for fast filter maintenance. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Level indication 3 - Operating unit 4 - Pressure gage 5 - Front panel with ventilation openings 6 - Four casters with locking brake 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Overflow connection 5 - Rating label 6 - RS 232 interface 7 - Alarm output 8 - Power supply 9 - Drain screw 10 - Ventilation openings 1 - Display 2 - LEDs 3 - Control buttons 4 - Main switch Liquid level indicator a - Max. level b - Min. level Pressure gauge The models with bypass (MC600 and MC1200) are equipped with a pressure gauge to read the set pressure.

This listing is for a Sheldon Manufacturing SC05A-2 Air Jacketed CO2 Incubator.The Shel Lab Model SC (more)O5A is ideal for sensitive tissue and cell culture applications.Specifications:Interior Volume (Nominal) - 142 LitresInterior Dimensions (WxDxH) - 521 x 500 x 546mmExterior Dimensions (WxDxH) - 693 x 724 x 960mmShelves - 3 Standard (8 Total)Maximum Weight Per Shelf - 15.8kgPermitted Total Load - 47.6kg per unit

Mini laboratory centrifuge 846070 for GREINER Bio-One microplates New equipment in its original pack (more)aging Speed: 2,550 rpm (16,022.1 rad.min-1) Capacity: 2 Microplates

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW