Ohaus 30314821 6 x 250ml Fixed Angle Rotor

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark H5100-150 8 x 15ml Block for MultiTherm Touch The Benchmark H5100-150 8 x 15ml Block for M (more)ultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-150 is not compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-150 8 x 15ml Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

one digital tester Manuf: Wandel & Goltermann Model: TKL-12 description: display: high > +0.7 U ... (more).......low < +0,3 Uimpulse limit:                           ca. 0.5 UVimpulse duration:                   > 1usec power supply:                         + 12 - 14 VDCinput                                           1 MegOhm, 25 pFinput cirrent                              15 uA a very versatile instrument to check and display logic states of CMOC or 12 V logic units quickly and effective up to 0.5 MHz Tester in is used  condition and 100 % functional tested - comes with case and manual

IKA MultiDrive control MT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation.Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control MT Package includes: - 5 Spare Seals - IKA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive MT 150.5 Milling tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson M1800H Mechanical Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wa (more)ves and creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, continous operation, as well as heating at 69°C/156.2°F Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability.Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Click Here to View Product Video INCLUDED: The Branson M1800H Mechanical Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Benchmark Compact Anti Static Ionizer Static charge can accumulate on many types of samples as well  (more)as weighing containers, affecting mass determination on an analytical balance. The Benchmark Scientific W3130 Accuris Anti-Static Ionizer produces and emits negatively and positively charged ions that will neutralize static electricity on samples and containers. A blower can be turned on for rapid static discharge, or turned off for work with powders or light-weight materials. INCLUDED: The Benchmark Compact Anti Static Ionizer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

15 stirring positions, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept  (more)for powerful mixing of solutions, power reserves up to 3,000 ml per stirring point, 100% synchronized speeds, jerk-free stirring even at low speeds. Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust-, and germproof, extremely robust construction and performance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO2-incubators and ovens. Stirring points: 15 Stirring point distance: 65 mm Stirring volume/stirring point: 1 – 3000 ml Speed range: 100 – 1,600 rpm Stirring power (max.): 40 W Material housing: Stainless steel Permitted operation conditions HT-version:  up to +200°C in air, up to +95°C in water submerged Dimensions (WxDxH): 245 x 375 x 38 mm Weight: 9.5 kg