Beckman Coulter SX-4750 Round Bucket Lids Deckel Set of 2

Benchmark Heat Block, 12 x 15/16mm The Benchmark Block, 12 x 15mm or 16mm test tubes is for use with (more) any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 12 x 15/16mm includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus i-D33XW150C1X7 AM Defender 3000 Washdown Bench Scale, 300 lb., 0.1 lb. Maximum Capacity 300 lb (more). (150 kg) Readability 0.05 lb. (20 g) Platform Size 25.6 x 19.7 in. (650 x 500 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord or rechargeable battery - Standard RS232 and optional USB device or ethernet - 304-grade stainless steel platform and frame, stainless steel IP66 indicator, IP67 load cell, non-slip adjustable rubber feet - 150% overload protection - 2 Year Manufacturer's Warranty

Benchmark Scientific UV-Clave UltraViolet Chamber, 115V UV Wavelength 254nm UV Intensity +500µW/cm²  (more)UV Dosage 600mJ/cm2 Features - Eliminates up to 99% of surface DNAEquipped with powerful UV-C bulbs on both the top and bottom, along with reflective chamber walls and a UVC-transparent shelf - UV timer adjustable in 5-minute increments from 5 to 20 minutes - Available to test for proper UV exposure levels - Integrated auto shut-off feature prevents UV illumination when the door is open Short-wave UV light is an effective method for the disinfection of surface DNA, RNA and microorganisms. With the UVClave chamber, highly focused UV irradiation is used to disinfect tools, vessels and other research items, eliminating up to 99% of surface contamination. Unlike most UV chambers, the UV Clave includes powerful UV-C bulbs on both the top and bottom of the chamber. When combined with our proprietary shelf that allows for >90% of UV-C light transmission and highly reflective chamber walls, the result is true 360° exposure with no blind spots. Exposure time is adjustable. An optional heating cycle can be added to assist in drying items that may have been washed or chemically disinfected prior to insertion.To protect users, the integrated auto shut-off prevents illumination when the door is open. Optional indicators are available to test for proper exposure levels. INCLUDED: The Benchmark B1450 UV-Clave UltraViolet Chamber, 115V includes: - UVC Transparent Shelf - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This revolutionary training arm provides complete venous access for IV therapy and phlebotomy, plus  (more)sites for intramuscular and intradermal injections. An extensive 8-line vascular system allows students to practice venipuncture at all primary and secondary locations, including starting IVs and introducing Over the Needle IV Catheters. The venous system simplifies setup with only one external fluid bag supplying artificial blood to all veins simultaneously. The dorsal surface of the hand includes injectable metacarpal, digital, and thumb veins. The antecubital fossa includes the median cephalic, median basilic, and median cubital veins. Venipuncture can also be performed along the basilic, cephalic, accessory cephalic, and median antebrachial veins. Intramuscular injections may be performed in the deltoid muscle and intradermal injection sites are located in the upper arm. Intramuscular injections into the deltoid muscle are enhanced by the soft, lifelike skin and by the natural bony landmarks in the region. Intradermal injections using distilled water will create characteristic skin welts at designated sites on the upper arm. The realism of the Life/form® Advanced Venipuncture and Injection Arm is truly amazing. The soft, flexible fingers are molded separately with extreme attention paid to every detail – right down to the fingerprints! Flexion of the wrist helps students develop manipulation skills. The replaceable skin rolls as the veins are palpated, and a discernible pop is felt when entering the veins. The Life/form® molding process reproduces the fine details of the skin to make the arm look and feel alive. Valves in the veins can be seen and palpated on the skin surface. Simulated veins and skin are completely replaceable to keep this training arm looking and working like new. Under normal use, hundreds of injections may be performed before the veins or skin need to be replaced. Complete replacement kits are available and easy to use. To extend the life of the veins, an aerosol sealant is available to seal punctures and prevent leakage.Includes 2 uarts of simulated blood, 3 cc syringe, 12 cc syringe, needle, two fluid bags, instruction manual, and soft carry case.

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions - D54 W106 H70cm

Branson M3800 Mechanical Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and  (more)creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, as well as the ability to set continous operation Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features: Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Click Here to View Product Video INCLUDED: The Branson M3800 Mechanical Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Temperature range: Ambient +8°C to 130°C Temperature stability (at 37°C): ± 0.1°C Temperature unifor (more)mity within block (at 37°C): ± 0.1°C Temperature uniformity within block (at 130°C): ± 1°C Display resolution: 0.1°C Dimensions (WxDxH): 235 x 280 x 115 mm Weight (without blocks): 2.3 kg Equipped with: 1x Block SHT1/12 (Tube size: 12 mm, No of holes: 20, Hole size (ØxD): 12.5 x 47 mm 1x Block SHT1/16 (Tube size: 16 mm, No of holes: 12, Hole size (ØxD): 16.6 x 47 mm

If you buy a PUE 7.1 Weighing Terminal by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. The PUE 7.1 terminal is a constructional component of industrial load cell scales. Ergonomics and Comfort of Operation It is equipped with 5.7" TFT display featuring a touch panel and a membrane keypad. The device offers two proximity sensors which can be programmed using the menu. It can connect with maximum 2 weighing platforms, a barcode scanner, a printer, a labeller, RFID reader and PC equipment (mouse, keyboard, USB flash drive). Standard PUE 7.1 terminal communicates with 1 weighing platform, and is provided with an extended communication interface offering 2×USB, 2×RS 232, Ethernet, 4inputs/4outputs (digital), Wi-Fi. It is possible to expand the PUE 7.1 terminal with 1 extra platform, this is done by installation of an additional platform module, DP-6. Caution: in case of a terminal supporting 2 weighing platforms, only cable version is available (/R version does not exist).

Self-centering weighing pan of a floating nature is intended for APP KO comparator. It is used inter (more)changeably with a standard weighing pan. The “floating” weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the APP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass. The pan surface is covered with cork featuring marks that determine position of particular weights.