Molecular Devices SpectraMax Paradigm Multimode Microplate Reader Alpha HTRF Fluo ABS Lum

Tecan ST Sunrise Remote F039300 Microplate Reader With software Year of manufacture: 2004 One of th (more)e plastic hinges of the upper flap (location of the microplate) is broken View the photo

This system measures the growth of micro-organisms. This system features a unique incubator incorpor (more)ating a liquid circulation heat exchanger which provides constant temperatures to all wells, a linear shaker to assure good mixing in each well, a sensitive reader that measures turbidity, a technique more sensitive than a spectrophotometer. Additionally, the system is equipped with 8 filters to measure specific wavelengths, two covered honeycomb plates may be run at one time that makes it possible to run 200 samples simultaneously. Linear range: 0.0 – 2.0 A (max deviation <2%) Noise: max 0.002 A at 0.0 A Drift: max 0.003 A Resolution: 0.001 A Warm-up time: 30 min Light source: Quartz-Halogen lamp 8V/50W Filters: 405, 420, 450, 492, 540, 580, 600 nm and wide band filter 420 – 580 nm Half band with: 3 – 10 nm Detector: Silicon photocell Microplate type: Honeycomb 2 microplate, 100 wells per plate Capacity: 1 – 2 microplates Maximum volume: 400 µL/well Incubating temperature: 1.0 – 60.0°C, selectable with steps of 0.1°C. (Depends on the ambient temperatue. Bioscreen can go 6°C below or 30°C above ambient temperature up to a max of 60°C) Temperature uniformity: ± 0.1°C Heating time from 20°C to 30°C: 30 min Heat transfer fluid required: Mixture of ethylene glycol and water 1:1 Dimensions (WxDxH): 620 x 380 x 230 mm Weight: 22 kg

Berthold Technologies Tristar 2 LB 942 Multimode Reader This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and powers on, however, we are unable to test it further at our facility due to requiring connection to a PC with relevant software. Included with it is; 1x Mean Well 24 volt power supplyM/N: GS220A24-R7B

Thermo Scientific Multiskan FC microplate reader. The wavelength range is 340 to 850 nm, which allow (more)s a variety of applications from enzymatic kinetic studies to Lowry assays. Accuracy ± 1% for 0.3–3 Abs at 405 nm, ± 2% for 3–4 Abs at 405 nm. Eight-position filter turret with three standard filters (405, 450 and 620 nm) pre-installed. Slow, medium or fast linear agitation. Fast processing reading in 6 seconds. Automatic calibration and self-diagnosis. Quick access to the most used protocols. The internal software contains qualitative and quantitative calculations for simple, dual and kinetic measurements. USB interface User manual. Specifications

Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included Plates Accepted 96-Well  (more)and 384-Well Flat Bottom Plates Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 &amp; 384-well plates - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9610 is designed for efficient processing of multiple samples and accepts standard 96 well plates as well as 384 well plates for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5⁰C up to 45⁰C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included includes: - SmartReader PC Software for MR9610 - Operator's Guide - Power Cord - 1 Year Manufacturer's Warranty

Statebourne Biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar This was removed from a universi (more)ty lab where it was surplus to requirements. The unit has not been tested but is in good cosmetic condition with minor marks from use. 6 holder inserts. Triangular with one curved side. Sides are 20cm.46cm diameter. 78cm height w/o wheels. 88cm height w/ wheels.

This Astell Scientific Top Loading Autoclave AACO52 was removed from a university lab where it was s (more)urplus to requirements. The unit has been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request. It is in good cosmetic condition with minor marks from use.

Labconco CentriVap Complete Acid-ResistantVacuum ConcentratorTheall-in-one CentriVap Complete Vacuum (more) Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315021 CentriVap Complete Acid-ResistantVacuum Concentrator, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036300340 Overhead Stirrer Impeller, BR 11 Straight-Blade Due to its blade dimensions, the  (more)straight-blade impeller BR 11 is ideally suited for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 100 mm, ideal ground clearance: 5 mm, ideal filling level: 100 mm, and ideal volume: 800 ml. The straight-blade impeller BR 11 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300340 Overhead Stirrer Impeller, BR 11 Straight-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark Mortexer Vortex MixerThe Mortexer™ is MORE than your standard vortex mixer. The unique des (more)ign of the Multi-Head™ (included) features a traditional cup head for general purpose mixing, plus holds up to eight microcentrifuge tubes. The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. Increased speed, up to 3400 rpm produces an instant vortex of even the largest sample sizes, including full 50ml tubes. Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls. INCLUDED: The Benchmark Mortexer Vortex Mixer includes: - Unique Multi-Head - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty