Astell Scientific Top Loading Autoclave AACO52 Lab

Convenient effective way to quickly decontaminate your micro-dissecting instruments. No more need fo (more)r messy chemicals or open flames in the lab, and the small footprint saves bench space. Effective when rapid decontamination of micro-dissecting instruments is needed.  The unique stainless steel glass bead bath remains at a constant 260ºC, allowing you to insert the tips of your instruments whenever you wish to decontaminate them. And it’s fast…most micro-dissecting instruments decontaminate within 15 seconds. Operating Temperatue: 260ºC Stainless Steel Well (⌀xH): 50 x 101 mm Suitable Glass Beads: 1.5 mm lead free glass balls Dimensions (HxWxD): 171 x 133 x 133 mm Weight: 2 kg

Chamber dimensions (Ø x depth): 500 x 500 mm Capacity: 117 L See for additional info: https://www.sy (more)stec-lab.com/autoclaves/vertical-top-loading-autoclaves-40-150-l/

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab This system was removed from a universi (more)ty where it was surplus to requirements. Both units are in good cosmetic condition, however, they have not been tested beyond that due to the system being a visual PAT fail, it is being sold for Spares or Repair. Includes the following; 1x Autoclave Engineers unitModel: E010HM0210C112B200121E2101 1x Control towerModel: C1211224300010C

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave This was removed from a university lab (more) where it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is sin good cosmetic condition with minor marks.

Scilogex SuperPette Autoclavable Pipettor, 2-20μlThe new SCILOGEX SuperPette fully autoclavable digi (more)tal pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 2-20μl includes: - Two Year Manufacturer's Warranty

Benchmark BactiZapper Infrared MicroSterilizer The BactiZapper has an asbestos-free core element tha (more)t uses infrared heating to produce 815C (1500°F). It completely sterilizes in 5-7 seconds. The BactiZapper uses well-proven technology to provide instant sterilization of platinum inoculating loops, needles, glass tube/pipette mouths and various metal & borosilicate glass instruments used in quality control and research. It also has a lower temperature setting (500C) that can be used as a “standby” and extends usable life. The ceramic heating element is safely enclosed in a perforated stainless steel guard chamber, protecting users from accidental contact with the extreme temperatures of the core area. It is extremely compact, convenient, and can be used in anaerobic and aerobic chambers. INCLUDED: The Benchmark BactiZapper Infrared MicroSterilizer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

voltage and current adjustable with digital reading.

IKA C 3000 Automated Calorimeter Package 1/12 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling by touch screen operation or a standard USB mouse - Two different starting temperatures to choose from (22°C, 30°C) - Automatic ignition, automatic water filling and draining, automatic oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analyses - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new upside down crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 1/12 combines cutting-edge technology and user-friendly design to deliver precise calorific value measurements with exceptional efficiency. Featuring a responsive touch screen interface and the option to operate via a standard USB mouse, this calorimeter simplifies complex workflows. Its fully automated systems for ignition, water filling and draining, and oxygen filling reduce manual intervention, making it ideal for laboratories with demanding analysis requirements. With the ability to choose between two starting temperatures (22°C and 30°C), the C 3000 adapts to a variety of experimental setups for maximum flexibility. Engineered for accuracy and performance, the C 3000 offers up to six dynamic measurements per hour with a reproducibility of 0.15% RSD and four isoperibol measurements per hour with an impressive reproducibility of 0.05% RSD. The spherically shaped decomposition vessel enhances pressure stability and accelerates heat transfer, ensuring reliable results every time. Six integrated temperature sensors continuously monitor all critical parameters, while the innovative upside-down crucible holder simplifies sample preparation. With support for cooling via a compatible RC 2 Basic chiller, this calorimeter ensures consistent performance even during high-throughput workflows. The IKA C 3000 excels in connectivity and data management, featuring interfaces such as Ethernet, RS232, USB, and an SD card slot. Built for durability, it operates within a working temperature range of 22 to 30°C and meets rigorous international standards, including ASTM, ISO, and DIN specifications. Compact yet robust, with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 63.9 pounds, the C 3000 fits seamlessly into laboratory environments. With its advanced automation, exceptional precision, and versatile capabilities, the IKA C 3000 Automated Calorimeter Package 1/12 is the perfect solution for laboratories focused on quality and efficiency. INCLUDED: The IKA C 3000 Automated Calorimeter Package 1/12 includes: - C 3000 Measuring Cell - C 6012 Decomposition Vessel, Halogen Resistant - RC 2 Basic Recirculation Chiller - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 16 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus AX223/E Adventurer Precision Balance Maximum Capacity 220 g Readability 1 mg Repeatability (Ty (more)pical) 1 mg Features - High-accuracy weighing with a maximum capacity of 220 g and 1 mg readability - Reliable external calibration allows for precise measurements and ensures consistent accuracy during routine maintenance - 4.3" full-color VGA touchscreen display with user-controlled brightness for intuitive operation - Dual USB ports for easy data transfer and PC connectivity, meeting traceability requirements - Durable construction with a metal base, ABS top housing, and stainless steel pan for long-term use - Included draftshield with two-piece top-mounted side doors and sliding top door for easy access and reduced bench space usage - Fast 3-second stabilization time improves productivity in routine weighing tasks - RS232 and USB communication ports for seamless connection to printers and other devices - Space-saving design with wide door entry for easy placement of larger weighing vessels The OHAUS Adventurer is a precision instrument, designed to address both routine and specialized weighing needs in modern laboratories. Its interface boasts a 4.3" VGA graphic touchscreen, ensuring intuitive operation. Adhering to GLP/GMP standards, it integrates a three-tier user management system. Communication is streamlined with RS232, USB Host, and USB Device ports, with real-time clock data output capabilities.Constructed for longevity, it comprises a metal base, ABS top housing, and a stainless steel pan. Key design attributes include selectable environmental filters, auto tare functions, and user-definable calibration points. It supports user-specific communication configurations, data print options, and offers a selection of up to nine operating languages.INCLUDED: The Ohaus AX223/E Adventurer Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience P60N2A101B IP-60 Immersion Probe Cooler, 1.5 Rigid Coil Probe, -60 to -20C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60N2A101B IP-60 Immersion Probe Cooler, -60°C to -20°C, 150W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty