Metrohm 6.0726.100 Ag/AgCl Reference Electrtode Length 12.5cm up to 80 °C

Dimensions DxHxW 25x32x20 cm. Analysis time <26 seconds at a level op 100 mmol/l.

Astecair 3000L Benchtop Ductless Fume Cabinet This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Labconco CentriVap 12-13 mm Acid-Resistant Rotor Hexagonal rotor holds up to 132 1.5mL to 2.0mL  (more)microcentrifuge tubes 12-17mm rotor holds up to 52 2mL to 10mL tubes or up to 24 11mL to 19mL tubes 12-13mm rotor holds up to 40 1.5mL to 2mL microcentrifuge tubes or up to 108 3mL to 10mL tubes 28mm rotor holds up to 32 1.5 to 2mL microcentrifuge tubes or up to 12 40-50mL tubes Microtiter plate holds four each standard two deep-well plates DNA rotor holds up to 72 0.5mL microcentrifuge tubes or 60 1.5 to 2mL microcentrifuge tubes INCLUDED: The Labconco 7455101 CentriVap 12-13 mm Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HANNA HI97733 Ammonia Photometer, up to 100.0 mg/L New equipment in its original packaging HI97733 c (more)omes with 2 measuring cuvettes, plastic stoppers and caps and batteries. Range: 1.0 to 100.0 mg/L (NH4+) Resolution: 0.1 mg/L Accuracy at 25°C: ±0.5 mg/L ±5% of reading Method: Adaptation of the “ASTM Manual of Water and Environmental Technology, D1426-92” method, Nessler method Light source: LED with 420 nm narrow bandwidth filter Light detector: Silicon photocell Batteries/Lifespan: 3 x 1.5 V AA / > 800 measurements without backlight On-demand storage: Up to 50 measurements for on-screen recall Auto-off: After 15 minutes of non-use / After 30 min of non-use before a measurement Dimensions/Weight: 142.5 x 102.5 x 50.5 mm / 380 g

System consists of: PAA KiNEDx arm Peak Analysis 1M linear rail Peak Analysis CS-10 carousel with st (more)acks 2 Microplate stackers Software As-is, no warranty

Ohaus STMP4AL Multi-Position Analog Magnetic Stirrer Speed Range 60 to 1,400 RPM Maximum Capacity 4  (more)x 1L Number of Stirring Positions 4 Positions Features - Accommodates four samples simultaneously, ideal for dissolution studies, titrations, and more - Adjustable from 60 to 1,400 RPM with a manual control knob, providing flexibility for various scientific applications - Maintains speed stability of ±2% at 1,400 RPM - Built with durable cast aluminum and a chemical-resistant glass-filled nylon top plate - Includes a speed ramping feature that gradually increases motor speed for enhanced coupling - Microprocessor-controlled for precise speed regulation The Ohaus STMP4AL Multi-Position Analog Magnetic Stirrer, designed specifically for precision and efficiency in laboratory environments. This model features four stirring positions, making it ideal for applications such as dissolution studies, titrations, and synchronized stirring of multiple samples. With a manual control knob, users can precisely adjust stirring speeds from 60 rpm to 1400 rpm, ensuring consistent and repeatable results across all positions. The Ohaus STMP4AL is robustly constructed from durable cast aluminum with a chemical-resistant glass-filled nylon top plate, ensuring long-term durability and resistance to chemical spills. The stirrer incorporates a microprocessor-controlled system with a speed ramping feature that smoothly increases motor speed, enhancing the coupling and overall stirring effectiveness. INCLUDED: TheOhaus STMP4AL Multi-Position Analog Magnetic Stirrer includes: - Glass Filled Nylon Top Plate - 4 Stir Bars - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco Glass Trap for CentriVap DNA Concentrator Liquid Trap prevent liquid from entering the pump (more). LiquidTrap Kit includes a borosilicate glass container that holds 240 milliliters ofliquid, an epoxy-coated steel bracket for attachment to the side of a CentriVapConcentrator or RapidVap Vacuum Evaporation System, 18" (45.7 cm) of 0.5ID (1.3 cm) vacuum tubing, and two vacuum tubing clamps. INCLUDED: The Labconco 7970500 Glass Trap for CentriVap DNA Concentrator includes: - Steel Bracket for Attachment to CentriVap - Vacuum Tubing - Clamps x 2 - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA MultiDrive basic M20 Successor Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC (more) Process type Batch Features - Performs a wide range of crushing tasks on hard, soft, or fibrous samples - Suitable for dry grinding of hard and brittle substances with MI 250-S milling chamber - Interval operation benefits coarse crushing of hard samples and thorough blending - Integrated cooling in the milling cup for indirect heat dissipation; supports dry ice use - Batch processing with cutting, impact, blending, and dispersing capabilities - Brushless DC motor for reliable operation - Equipped with a USB interface for connectivity Regardless of whether samples are hard, soft or fibrous – IKA MultiDrive basic performs a wide range of crushing tasks. In combination with the milling chamber MI 250-S MultiDrive basic is perfectly suitable for dry grinding of hard and brittle substances. - High performance: 1000 Watt output and variable rotational speeds ranging from 3000 rpm to 20 000 rpm guarantee excellent crushing results. - Interval operation: Is an asset during the coarse crushing of hard samples or for extra thorough blending. - Integrated cooling: A cooling system is integrated in the milling cup, which allows indirect heat dissipation. In addition, dry ice can be used for cooling. INCLUDED: The IKA MultiDrive basic M20 Successor Package includes: - IKA MultiDrive basic - MultiDrive MI 250 – S - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V Chamber Volume 25L Sterilization Temperat (more)ure Range 105°C to 126°C Chamber Dimensions 9.4 x 21.6 in. (24 x 55 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models. INCLUDED: The Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty