3 x Faulty Findlay Irvine Type: 292/16 Grip Testers Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

3 x Faulty Findlay Irvine Type: 292/16 Grip Testers Spares/Repairs These were removed from a univers (more)ity lab where it was surplus to requirements. The items are in reasonable cosmetic condition but have not been tested. All are incomplete, missing drawbars & one is missing the Front wheel, chain & signal Processing Unit. They are sold for spares/repairs.

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

This Sigma  2-16P Centrifuge with Nr.12148 15300/min Rotor was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and is in full working order. It does begin to whistle above 10000rpm, but we believe this is just down to the lid seal. It has had new lid struts fitted and new QR lid release plugs. With it is a Sigma Nr.12148 15300/min Centrifuge Rotor. Good used condition.Measures: Approx 17cm.Centre bore: 10.8mm.Tube holes: 10.8 x 36.2mm.24 sample holes.

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to +70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 45 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Capacity of 2 agitator trays; for containers over 150 mm only 1 tray can be used - Temperature stability ± 0.2°C - Shaking frequency: 20 to max. 250 min-1 - Stirring width: 30 mm - Usable volume 45 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Amplitude of shaking 25 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 300 mm - Capacity approx. 45 L / 2 stirring trays - External structure in electrolytically galvanized steel sheet, powder coated

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Particle counter for liquids from Malvern, type Mastersizer 2000. The Mastersizer 2000 measures the  (more)particle sizes in a sample and the proportions and displays them on the computer in a graph, the measurement is done by the particles passing between detectors and a laser. Particle size: 0.02 µm to 2000 µm Lasers: Red: HeNe gas laser with a wavelength of 633 nm Blue: LED, Wavelength: 466nm Dimensions (WxDxH): 1330 x 300 x 400 mm Equipped with a Hydro 2000G cell but without the dispersion unit. Software with recommended version.