Magellan Instruments Tandem Pro Gas Analyser

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items:1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

This Varian Gas Chromatograph Model - CP-3800/3380 with Faulty CP-8400 Autosampler was removed  (more)from a university lab. The lab said it was fully working prior to removal, but will need a new autosampler. We have powered it up at our facility but have not tested it further. 1 x Varian Gas ChromatographModel - CP-3800/3380

Servomex 1440 Gas Analyser Double Twin Unit This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but we were unable to test it further at out facility. It is in good cosmetic condition with minor marks from use.

Varian Star 3400 CX gas chromatograph with onboard printer, dual FID detectors and dual split/splitl (more)ess injectors. Note: this unit is sold as is, no warranty applies. This unit turns on but no further tests have been performed.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

M1 Mass Standard - rectangular. Nominal value - 250 kg.

KNF N860.3FT.40.18 IP54-T Diaphragm Pump Ultimate Vacuum 4 mbar Maximum Flow Rate 60L/min (3.6 m3/h (more)) Protection Class IP54 Features - Clean, 100% oil-free operation - Corrosion-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Self-drying system removes condensate without affecting the vacuum level - Maintenance-free KNFN860.3FT.40.18 IP54-T Diaphragm Pump is a twin-head unit with an integrated KNFself-drying system. Designed for a wide range of applications in laboratories,including vacuum drying of chambers (for drying or heat-treating substances andcomponents) or steam sterilizers for sterilizing instruments, vessels, filters andtextiles. The KNF N860.3FT.40.18 IP54-T Diaphragm Pump can be used veryuniversally due to its high resistance to aggressive media. The KNFself-drying system allows condensed liquid to be blown out of the pump heads ata high speed during evacuation. The drying cycle can be adjusted to therequirements of the individual process using three variables. The KNFN860.3FT.40.18 IP54-T Diaphragm Pump is chemical-resistant, therefore suitable forhighly aggressive or corrosive gasses and vapors.INCLUDED: The KNF N860.3FT.40.18 IP54-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Adam Equipment LPB 423I Luna Precision Balance, 420g, 0.001g Capacity 420g Readability 0.001g Repea (more)tability 0.002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LPB 423I Luna Precision Balance, 420g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty