Varian Star 3400 CX

NST Emission AnalyserModel: Emission AnalyserSerial#: 3320-10/3 This was removed from a university l (more)ab where it was surplus to requirements. It is in good cosmetic condition but would not pair with the PC and software from another system, so it is assumed faulty and therefore it is sold as Spares or Repairs.

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x 1/4" straight connector1 x USB cable1 x hard carry case

This Varian Gas Chromatograph Model - CP-3800/3380 with Faulty CP-8400 Autosampler was removed  (more)from a university lab. The lab said it was fully working prior to removal, but will need a new autosampler. We have powered it up at our facility but have not tested it further. 1 x Varian Gas ChromatographModel - CP-3800/3380

Servomex Analyser Series 1400 CO2 Analyser This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Servomex Analyser Series 1400 CO2 Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Varian Star 3400 CX gas chromatograph with onboard printer, dual FID detectors and dual split/splitl (more)ess injectors. Note: this unit is sold as is, no warranty applies. This unit turns on but no further tests have been performed.

A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) Capacity 220 g Re (more)adability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-alert visually and audibly indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Internal Auto calibration or with easy one-touch button - performs and documents internal calibration - Password-Protect – offers password-protection up to 11 users and 1 administrator - GLP/GMP/GCP Compliance with full calibration reports - Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF | REZERO, CAL, MODE, SAMPLE, PRINT, TARE - Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility - Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional) - Stainless steel pan and dust-plate can be easily removed for cleaning - Die-cast aluminum housing provides extra stability and durability - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), delivers precision in regulated environments with its 220 g capacity and 0.0001 g readability. This balance is NTEP certified, ensuring compliance and accuracy for legal-for-trade applications. It enhances productivity with a fast stabilization time of approximately 2.0 seconds and supports stringent compliance needs, including USP41, with features that alert users when sample sizes fall below minimum requirements, effectively reducing waste and increasing efficiency. Designed to simplify routine checks and increase operational efficiency, the GX-224AN includes an Electronically Controlled Load (ECL) management system. This system performs repeatability testing and automatic precision checks internally without the need for external weights, thereby enhancing the reliability of measurements. The balance is equipped with six straightforward keys and offers a quick toggle switch between USB and RS-232C communication options, facilitating seamless integration into existing data management systems. For ease of use, the GX-224AN features an illuminated, front-mounted level that ensures quick and accurate leveling, even when operators are wearing gloves. It incorporates automatic self-calibration and one-touch internal/external calibration, guaranteeing valid results every time. The balance's robust construction and comprehensive measurement capabilities—including percent calculation and piece counting—make it ideal for a wide range of scientific applications. This analytical balance, with its precise measurement technology and legal-for-trade certification, stands as an excellent choice for professionals requiring dependable, high-performance tools in regulated settings. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 500 g.

Ohaus Aquasearcher a-AB33PH-B pH Meter The next step in the evolution of OHAUS’ original Starter Ser (more)ies, the all-new AQUASEARCHER™ AB33PH bench meter is designed to be reliable, efficient, and user-friendly. The i-Steward ensures repeatable and consistent measurement accuracy for optimal peace of mind. The large LCD display and touch keypad makes changing the parameters, executing setup, and performing calibration as simple as using a smartphone.INCLUDED: The Ohaus Aquasearcher a-AB33PH-B pH Meter includes: - Power Cord - a-AB33PH Benchtop Meter - Stand-Alone Electrode Holder - Two Year Manufacturer's Warranty