Adam Equipment LPB 423I Luna Precision Balance, 420g, 0.001g

F1 class standard: knob weight Nominal value: 500 g Material: stainless steel Knob weight is excepti (more)onal measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

The MW-04-1 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, Ethernet. The MW-04-1 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-1 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, Ethernet may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-1 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

M1 Mass Standard - rectangular. Nominal value - 100 kg.

Ohaus EX1103 Explorer Toploading Balance The OHAUS EX1103 Explorer Precision Balance with 1100 gram  (more)weight capacity, has newly optimized linearity and repeatability specifications and enhanced vibration filtering for better balance stability. All Explorer models also come standard with AutoCal automatic internal calibration. These combined enhancements improve accuracy, efficiency, and throughput. A large color touch-screen display, icon-driven application software that features 14 unique application modes, and an adjustable angle display make the OHAUS Explorer series the easiest to use, most advanced balance in its class today. The base and terminal of the Explorer EX1103 separate for maximum flexibility in any work area. It also has four user-programmable touch free sensors to minimize cross contamination and button wear. Click Here to View Product Video INCLUDED: The Ohaus EX1103 Explorer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato VBE-408 48 in. Wide Vented Balance Enclosure, 115V Air Flow 80 FPM Viewing Medium 3/8" Jewel (more)ed Acrylic Plastic Noise Level 55 dBA at 80 FPM Features - Includes top mounted HEPA/Blower filtration, set-up to circulate the internal chamber atmosphere, through the HEPA filter and into the lab - The smooth curved, or rounded ABS™ airfoils provide gentle, unobstructed air flow through rear, and side, baffles and through top mounted HEPA filter - Constructed with optically clear 3/8” jeweled acrylic plastic - Front viewing sash with multiple air foils for higher containment and draft deflection - Includes phenolic base with superior chemical resistance and provides higher analytical balance stabilization - Low vibrations. The black base allows for easy powder detection - Electrical cord outlet port - Air flow alarm system - Adjustable front draft protection - Side blank plate for optional Bag-In / Bag-Out port - Includes face velocity alarm Self-contained laboratory unit ideal for fine powders, chemicals and biological products. Designed with top-mounted HEPA/blower filtration set up to circualte internal chamber atmosphere, through the HEPA filter and into the lab. Constructed with optically clear 3/8" jeweled acrylic plastics and phenolic base with superior chemical resistance. Outside width dimension is 48". 115V. INCLUDED: The Yamato VBE-408 48 in. Wide Vented Balance Enclosure, 115V includes: - Yamato VBE-408 48 in. Wide Vented Balance Enclosure, 115V - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ortoalresa Cónsul 22 centrifuge. Maximum capacity of 4 x 400 ml. Maximum speed: 14300 rpm (21,948 xg (more)). Includes RT 288 rotor for 12/8/4 microtiter plates with maximum speed of 3500 rpm. Microprocessor control. TFT touch screen with real-time information. Speed regulation in steps of 100 rpm and acceleration and braking in steps of 1 second and up to 175 ramps. Timer. Fast spin button, with adjustable speed. Automatic rotor recognition. Motorized lid closure. Maintenance free induction motor. Forced ventilation. Dimensions: 490*620*390 mm, 47kg. Consumption: 600W. User manual. The compact and high-capacity Ortoalresa Cónsul 22 centrifuge has the advantages of equipment from higher segments. The type of control it provides, through its color TFT touch screen, provides the user with functionalities that enable, in addition to controlling the equipment by operating parameters, the possibility of exporting data for subsequent analysis and programming for operation in the future. The autonomy provided by this equipment allows the user to optimize work time in the laboratory, by automating cycles and operating modes. These features also guarantee process traceability and ensure that no parameter is left out of control.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

IKA Roller 6 Digital Shaker Type of Movement Rolling Speed Range 5 to 80 RPM Number of Rolls 6 Roll (more)s Features - Timer: Countdown, adjustable from 1 s to 99h 59min - Counter: Display of shaking time - Error Code Display - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with keypad - Shaking diameter: 24,5 mm (height) - Speed range: 5 - 80 rpm The IKA Roller 6 Digital Shaker with 6 rolls provides smooth rocking and rolling action at infinitely adjustable speeds. Used for mixing blood samples, solid and liquid suspensions, and viscous samples, the unit can be used with all conventional tubes and cylindrical bottles. Easily removable attachments provide for quick cleaning in case of sample spills. The shaker features a countdown timer adjustable from 1 second to 99 hours and 59 minutes, and a counter display for shaking time. It operates effectively at 4 to 50 °C in incubators and is suitable for continuous operation. Removable rolls enable the shaking of larger tubes, and easy operation is ensured with a keypad. The speed range is 5 - 80 rpm with a 7-segment LED display, adjustable in 1 RPM steps.

Heidolph 036300450 Overhead Stirrer Impeller, AR 19 Anchor-Type Particularly in applications with ve (more)ry viscous media, it is important to have a stirring tool in use that enables the mixing process up to the edges of the vessel. This explains the shape of the anchor-type impeller and the width of the stirring blade of 60 mm. The AR 19 anchor-type impeller is ideal for vessels with the following characteristics: ideal vessel diameter: 67 mm, ideal ground clearance: 2 mm, ideal filling level: 67 mm, and ideal volume: 200 ml. The anchor-type impeller consists of a PTFE blade and a PTFE-coated stainless-steel shaft. The stainless-steel core ensures the stability of the stirrer shaft and the secure attachment in the overhead stirrer. The diameter in the clamping area is 6.5 mm; the stirrer shaft with the thick-walled PTFE coating has a diameter of 8 mm. Due to its anti-adhesive property (non-stick coating), the anchor-type impeller is easy to clean and can be used up to a maximum application temperature of 250°C. INCLUDED: The Heidolph 036300450 Overhead Stirrer Impeller, AR 19 Anchor-Type includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty