Hermle 18 x 1.5/2.0ml fixed angle rotor for Z287-A

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scilogex HP380-Pro LCD Digital HotplateThe Scilogex HP380-Pro LCD Digital Hotplate is a very economi (more)cally priced and ideal for accurate heating applications below 380C. The HP380-Pro LCD features an easy to read backlit LCD display, ceramic plate for chemical resistance, and electronic speed control for constant speed even during changes in load. Click Here to View Product Video INCLUDED: The Scilogex HP380-Pro LCD Digital Hotplate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards XDS Accoustic Enclosure (110V) Edwards’ acoustic enclosures are the ideal noise reduction so (more)lution for use in a laboratory or an industrial environment. The specially designed soundproof enclosures are made of materials with high noise absorption, reducing vacuum pump noise by up to 9 dB(A), with no impact on vacuum pump efficiency.INCLUDED: The Edwards XDS Accoustic Enclosure (110V) includes: - Operator's Manual - 1 Year Manufacturer's Warranty

To measure the integral (light) transmission of transparent as well as the integral reflectance at i (more)llumination/observation geometry of 0°/D of opaque solid samples of sheet materials, can also be used to evaluate the light scattering (haze) of translucent films at an illumination/sensing geometry of 0°/D.

The VELP stirring rod with fixed blade is ideal for medium/very low viscosity range and medium/high  (more)speed. Ideal for ES, LS, DLS, LH, DLH, PW, OHS series stirrers. Generates an axial flow in the container from top to bottom. All VELP stirring rods are made of stainless steel. When choosing the stirrer rod it is important to consider the power of the stirrer, the viscosity of the substance and its volume.

REC magnetic stirrer Advanced heating performance for your laboratory reactions REC features state-o (more)f-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the REC for laboratory applications performed at very high temperatures, as the maximum settable temperature of the heating plate is 550°C. Thanks to the extremely bright and easy-to-read digital REC display, it is possible to constantly monitor the set temperature by turning the convenient knob. Absolute safety and ease of use for laboratory operators The REC hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. It is not possible to connect the REC model to Velp's Cloud Ermes.

Multiposition magnetic stirrer MULTISTIRRER 15 digital Velp The MULTISTIRRER Digital series is one o (more)f a kind and represents the state of the art of multi-position stirrers, being equipped with both a digital display, in order to be able to precisely set the stirring speed, and a timer. The Timer: used as a countdown with consequent automatic shutdown or for an inversion of the rotation, automatically and based on the time interval pre-set by the user. The display: digital, which allows a precise setting of the stirring speed, reaching the speed of 1500 rpm with 10 rpm steps. SpeedServo™ system: ensures a constant speed even when the viscosity varies (counter-reaction). The worktop: in stainless steel to ensure unparalleled resistance and thorough cleaning. The MULTISTIRRER Digital remain cold even after several days of operation, a highly appreciated feature in microbiology and biochemistry. Samples can also be thermostated by combining the stirrer with a recirculating water bath. ROBUST AND PRACTICAL - The control panel is protected from liquid spills - Heavy duty steel construction with epoxy coating - Stainless steel cover - Very low height - ergonomic - Lightweight, easy to move - Designed for maximum durability and backed by a 3 year warranty THE ADVANTAGES OF THE VELP MICROSTIRRER - Clear surface for viewing particles and color changes - Intermittent mode schedules to suit your workflows - It doesn't get hot, even after days of continuous use - Can thermostat samples using a recirculating water bath - Ideal for microtitration, microbiology and biochemistry - Soft start but quick achievement of the set speed - High power magneto 'PCM' driven by single phase motor for continuous operation - Timer from 1 to 900 minutes; continuously - Rotation reversal: 5 to 900 seconds

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

ATAGO SUR-NE Clinical Refractometer Never Used Equipment SUR-NE is designed for clinical application (more)s: "Serum Protein", "Urine Specific Gravity" and "Refractive Index". Specifications: Range: Urine Specific Gravity: 1000 to 1060 Whey Protein: 0.0 to 12.0g/100ml Refractive Index: nD 1.3330 to 1.3660 Minimum Range: Urine Specific Gravity: 0.001 Whey Protein: 0.2g/100ml Refractive Index: nD 0.0005 Size and Weight: 4x4x18cm, 170g

Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RV 10 Auto Pro Flex Rotary Evaporator Features - 4L heating bath optimized for rapid achievement (more) of working temperature, with a temperature safety circuit and boil-dry protection - Integrated vacuum controller and timer function - Bright, high-contrast, TFT, color-graphic control panel with simple menu navigation and programming for up to ten individual procedures - Automatic cooling water management, heating bath management, and ventilation - Right or left flask rotation with push-off mechanism for tightly-fitting flasks - Digital interfaces: USB port and RS-232 interface for remote control Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Precise setting of distillation method per solvent with direct volume and efficiency control Integrated solvent library with 40 preset solvents and the ability to expand to incorporate new processes The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative handling concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. The new IKA Vacstar digital included in the package is controlled directly from the drive unit of the RV 10 auto via the data cable provided. INCLUDED The IKA RV 10 Auto Pro Flex Rotary Evaporator includes: - RV10 control - HB digital S099 Heating Bath - IKA VACSTAR digital Vacuum Pump - RV 05.10 Balljoint clamp - RV 10.89 Clamp NS 24 - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Vacuum hose (2 x 0.55 m) - Water discharge hose (1 x 1 m) - Water discharge hose (1 x 1 m) - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Auto Pro Flex Rotary Evaporator SpecificationsType of coolingwithout condenserCooling surface1500 cm2Speed range5 - 300 rpmReversible direction of rotationyesSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output1350 WSet temperature resolution1 ±KFilling volume max.4 lVacuum controller integratedyesTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight18.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interface yes USB interface yes Analog outputyesVoltage100 - 240 VFrequency50/60 HzPower input100 WPower input standby3.3 WComparison of ModelsSpecificationIKA RV 10 Auto Pro FlexIKA RV 10 Digital FlexIKA RV 3 FlexIKA RV 8 FlexType of CoolingWithout CondenserVerticalN/AVerticalCooling Surface1500 cm²0 cm²N/A1500 cm²Speed Range5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorManualManualStroke140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight18.6 kg18.5 kg12 kg22.366 kgRS 232 InterfaceYesYesN/AN/AUSB InterfaceYesYesN/AN/AVoltage100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote