Hellma Präzisionsküvetten aus Quarzglas Suprasil Set (2 Stk.) 108B-QS 10mm

For more information see attached document. WITHOUT ELECTRODE

Exhaust gases are better removed from the furnace and discharged. The B500 – P580 controllers can b (more)e used to activate the fan automatically (not for models L 1/12, LE 1/11, LE 2/11).

System consisting of: Dionex Ultimate SR-3000 Solvent Rack Dionex Ultimate LPG-3400MB Pump Dionex Ul (more)timate TCC-3000SD Column Compartment Dionex Ultimate MWD-3000 Diode Array Detector Software not included

Beckman Coulter 15ml Conical Adapters, Cat. #: 359472 The Beckman Coulter 15ml Conical Adapters, Cat (more). #: 359472 are for use with the Beckman GH 3.8 Swing Bucket Rotor and Beckman SX4750/A Swing Bucket Rotor. These adapters feature a capacity for 14 x 15ml conical tubes each with a maximum tube diameter of 18 mm. INCLUDED: The Beckman Coulter 15ml Conical Adapters, Cat. #: 359472 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Beckman Coulter 15ml Conical Adapters, Cat. #: 359472Bottom ShapeConicalRotor CompatibilityBeckman Coulter GH 3.8 and SX4750/A Swing Bucket Rotors

0

Three independently controlled stirring positions Powerful magnets for strong magnetic coupling Stai (more)nless steel top plate A space saving and economical unit with three independent stirring positions in a footprint only 600 x 270 mm. Easily accommodates 3 x 2 litre beakers. The stainless steel top plate is robust and, unlike aluminium, does not produce eddy currents and so ensures a very powerful coupling and stirring action. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres Plate material: Stainless steel Plate dimensions: 550 x 210 mm Speed range: 100 to 1500 rpm Dimensions (WxDxH): 600 x 270 x 110 mm Weight: 7 kg

Leica Microsystems Type - TCS SP2 Confocal Microscope System This was removed from a university lab  (more)where it was surplus to requirements. What is included is in good working order, but the system is not complete. It is missing the following; Table topCooling unitMicroscope isolation tableCameraFlexi tube for prior unit.Bulb for prior unit.There may be more missing parts, but we are unable to confirm. It is in good cosmetic condition with minor marks. Included are; Leica TCS SP2 MicroscopeModel: RCS SP2Serial#: 142400026 Attached to microscope:Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS Leica ∞/-/C HC PL APO 20x/0.75 Leica ∞/0.17/E HC PL APO 10x/0.40 CS 2 x Eyepieces HC PLAN S 10x/22 Leica Condenser 0.53 S 23 (521500)Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511) All other items included: Prior Lumen200Model: L200/CSerial#: 70808 Ernst Leitz Wetzlar GmbhType: 307-072.45Hg 100 W Bulb Leica Power Supply for DiodeLaser COH 405nm, 25mWPart#: 1530910001 03 Leica DM R ManualLeica Confocal SoftwareLeica TCS User Manual Leica PC with Software installed. Leica Dust cover for Microscope and PC.

Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 6 x 7.5 cm Maximum Power  (more)Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 325 ml Features - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Colored loading strips—for easy well detection when loading - Compact tank—reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit is a compact and efficient system tailored for routine nucleic acid preparatory and analytical electrophoresis. Designed for ease of use and consistent results, this unit can handle up to 32 samples per run, making it ideal for labs focused on high-throughput nucleic acid analysis. The SUB6 features a removable gel-casting tray with integrated silicone gaskets, allowing gels to be cast directly within the tank for a leak-proof setup. Equipped with color-coded, height-adjustable combs, the SUB6 enables easy comb thickness identification and precise control over well depth. The UV-transparent running tray allows users to image the gel without risking damage, while colored loading strips make well detection straightforward during sample loading. Its compact tank design reduces the buffer volume required, providing greater control over the voltage gradient and run time. Side handles ensure safe and easy transport around the lab, adding to the unit’s practical, user-friendly design. INCLUDED: The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Silicone Gasket* - 1 mm thick, 8-well combs, 2 pcs - Colored Loading Strips - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The UMA 2.5Y.FC automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.FC automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Stable Mechanical Design The UMA 2.5Y.FC automatic weighing system is equipped with an integrated anti-vibration table ensuring the greatest stability of mass measurements. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal. Climate Chamber The integrated climatic chamber guarantees constant ambient conditions in the chamber, ensuring proper filter conditioning in accordance with the PN-EN 12341:2014 standard: stability of operating temperature: ± 1oC, stability of relative humidity: ± 2.5%, the operating humidity in the climate chamber during the process: 30–60%, the room temperature during operation must remain within the range of 19-25°C, and the relative humidity should oscillate between 40–60%.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW