Branson SFX150 Sonifier

Phototrode dp 550 For some applications, such as EDTA titrations of metal ions, there is often no s (more)uitable sensor to indicate the course of the titration. In such cases one has to resort to the use of color indicators and a visual color change as the endpoint of the titration.

System consists of: Dionex UltiMate 3000 Degasser Dionex UltiMate 3000 Pump Dionex UltiMate 3000 Aut (more)osampler Dionex UltiMate 3000 Column Compartment Dionex UltiMate 3000 Diode Array Detector PC

Interfurn 2 Drawer cabinet low Cream 450x490x450

Carl Zeiss Axioplan Imaging Microscope Spares/Repair Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition externally but has had all its internal wiring and power supply removed, therefore we are unable to test it further, and it is listed as Spares/Repair. It would require rewiring and a new PSU fitted before use. This microscope features the following: - Zeiss HBO50 50W Lamphouse Lamp House + Power Supply for Axiovert Axioplan

This Leica VT1000M Vibrating Blade Microtome was removed from a university lab where it was surplus  (more)to requirements. The item powers on and the forward/reverse switch works with the speed working to the dial setting. The top section with the lamps and the magnification window is missing. It seems to be in otherwise working condition. It is in reasonable cosmetic condition but has marks from use.

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.