Julabo FT900 Immersion Cooler, 115V/60Hz (NRTL Certified)

DW Scientific Whitley Automated Spiral Plater with Whitley Vacuum Source (WASP) This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powered up and read “System Error”. Therefore, it is listed as Spares or Repairs. Includes the following: 1x DW Scientific Whitley Automatic Spiral Plater with Whitley Vacuum SourceS/N: WA03DB 1x DW Scientific Whitley Vacuum SourceS/N: NV06CM

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-24098 Bowens Esprit 500 Professional Photography Flash Head with Accessories [condition: Used]ITEM-29716 Unbranded Mechanical Stage Cross Specimen Table Lab [condition: Used]ITEM-17348 Raymond A Lamb Hotplate Lab [condition: Used]ITEM-29783 Labnet Spectrafuge 16M ITEM-21195 3 x Micro Centaur Centrifuges [condition: Used]ITEM-17226 Bieffe Padova Light Source [condition: Used]ITEM-21148 3 x Bio-Rad Power Pac [condition: Used]ITEM-21064 WPA CQ75 Chart Recorder [condition: Used]ITEM-29874 Labnet MultiGene II Thermal Cycler [condition: Used]ITEM-21080 Thermo Electron FastPrep FP120 Cell Disrupter Lab [condition: Used]ITEM-21206 Advance Electronics Voltage Stabilizer [condition: Used]ITEM-17340 Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-21146 2 x Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-23963 8 x Eagle UV Bank Note Checker Lights [condition: Used]ITEM-17090 Hanna Instruments HI 8417 pH Meter [condition: Used]ITEM-17344 Lot of Microscope Heads & Other Parts [condition: Used]ITEM-21065 Griffin Velocity of Light Apparatus [condition: Used]ITEM-23988 Sorvall SS-34 Rotor [condition: Used]ITEM-21061 Philip Harris Classroom Laboratory Joulemeter Lab [condition: Used]ITEM-29717 Nikon Phase Contrast Condenser [condition: Used]ITEM-29622 Job Lot Axon Instruments [condition: Used]ITEM-17178 Lathe Faceplate 40cm Diameter [condition: Used]ITEM-19090 BIO-RAD Screen Eraser - K Phosphorimager Lab [condition: Used]ITEM-21152 Heraeus #3335 Centrifuge Rotor [condition: Used]ITEM-17360 Grant GD100 Laboratory Water Bath Lab [condition: Used]ITEM-23989 Sorvall SS-34 Rotor [condition: Used]ITEM-17088 Kodak Darkroom Lamp [condition: Used]ITEM-21181 5 x Audio / Sound Dual Channel Passive Direct Injection Boxes [condition: Used]ITEM-17293 Lot of Monitor Brackets [condition: Used]

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37836 AbiMed InsituPro Hybridization Robot ITEM-37838 Gallenkamp Economy Incubator With Fan Size 1 ITEM-37837 Grant JB1 Water Bath ITEM-35282 PEAK Scientific CFH300 Hydrogen Generator Lab ITEM-35380 Grant LTD6G LTD6/20 Recirculating Refrigerated Water Bath Chiller Lab ITEM-37839 Grant JB SeriesITEM-37834 G-Storm GS00001 ITEM-37835 2 x Grant JB1 Water Bath ITEM-37825 Sartorius Basic ITEM-29668 4 x Job Lot Lab Printers HP 3396A & SP 4270 & PU 4810 ITEM-37833 Polyhatch Automatic Incubator ITEM-37840 G-Storm GS00001 ITEM-37841 Grant Sub 14 Water Bath ITEM-37842 Grant sub 8 Water Bath

IKA MultiDrive control MT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation.Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control MT Package includes: - 5 Spare Seals - IKA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive MT 150.5 Milling tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex Fixed Angle Rotor 15mL x 30The Scilogex Fixed Angle Rotor 15mL x 30 has the capacity to acc (more)omodate 30 x 15mL tubes and can a reach maximum speed of 4,500RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor 15mL x 30 includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

A glove box is a hermetically sealed enclosure. It provides a working space in its inner side that i (more)s completely segregated from the outside. As an inert gas glove box it is designed to maintain in it’s inside an artificial atmosphere, typically consisting of pure nitrogen or pure argon with a concentration of oxygen and water vapour typically below 1 ppm. It is used to protect the product, which is handled inside the box from the outside, in particular from unwanted reaction with oxygen and/or water vapour (product protection).

Bio-Rad Dyad Disciple Peltier Thermal Cycler PTC0221 2-48 Well & 96 Well Block This was removed  (more)from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it without the control unit. Bio-Rad Dyad Disciple Peltier Thermal CyclerModel - PTC0221SN - DY005562 2-48 Well Alpha Unit Block AssemblySN - AL037212 96 Well Alpha Unit Block Assembly (ALP2296)SN - AL110470 Holds 0.2ml vials

This listing is for a Cole Palmer Masterflex L/S 7554-95 Peristaltic Pump.The unit is in full workin (more)g condition and is ready for immediate release.This unit is supplied with no pump head.The Cole-Parmer MasterFlex L/S 7554-95 is a high-performance peristaltic pump designed for precise and reliable fluid transfer across a range of applications in laboratory, pharmaceutical, and industrial settings. Its versatile design and robust features make it an essential tool for any fluid handling needs.Features:Versatile Applications: Ideal for transferring a wide range of fluids, including delicate biological fluids, viscous materials, and corrosive solutions.User-Friendly Interface: Easy-to-read digital display and intuitive controls for straightforward operation and adjustment.Durable Construction: Built for longevity with materials resistant to wear and chemical damage, ensuring reliability in demanding environments.Quiet Operation: Designed to run quietly, making it suitable for laboratory settings without disrupting workflows.Safety Features: Includes built-in protection against overload and dry running to extend pump life and ensure safe operation.Key Specifications:Flow Rate: 0.6 to 3400 mL/min, adjustable based on tubing sizeSpeed Range: 6 to 600 RPM for precise flow controlPumping Method: Peristaltic pumping action for gentle and accurate fluid transferReversible Pumping: Supports easy priming, purging, and efficient fluid transferTubing Compatibility: Compatible with a variety of tubing materials and sizes for flexibilityIdeal For: Laboratory fluid transfer, pharmaceutical production, process scaling, and industrial fluid handling.

Julabo DYNEO DD-BC12 Heating Circulator with Analog Output, 115V/50-60Hz Working Temperature Range  (more)20°C to 200°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Suitable for internal and external applications - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - High-quality thermal insulation of the bath tank The DYNEO™ heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank for temperatures to 200°C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with an integrated drain valve. Features a color TFT display with central rotary knob controller, multi-lingual interface, integrated programmer, Pt100 port for external temperature control. USB connection for external PC control and data-logging; Digital option includes RS232 port; analog option includes analog interface for voltage or current control. PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-BC12 Heating Circulator with Analog Output, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW