Olympus Auxiliary Lens Vorsatzlinse 110AL2x WD38 for SZ30 / SZ40

Hersteller: Carl Zeiss / GERMANY Modell: Standard 20 P/N: 45 08 05 Beschreibung: Das Standard 20 ist (more) ein universell einsetzbares Durchlichtmikroskop zur Darstellung von Feinstrukturen in Biologie und Medizin. Typische Einsatzbereiche des Standard 20 sind u. a.: • Labormikroskopie• Arztpraxen• Ausbildung (Unterricht, Studium) Das Standard 20 ist mit seinem Pyramidendesign ein kompakt aufgebautes Durchlichtmikroskop. Neben den auflösungsstarken Objektiven (2,5/10/40/100 -fach) und den wichtigen Mikroskopierverfahren Hellfeld, Dunkelfeld (Schieber 44 52 24 benötigt) stehen dem Anwender optional die Verfahren Phasenkontrast, Polarisationskontrast, Fluoreszenz ein Foto-Ausgang für die Foto- und Videodokumentation zur Verfügung. Komplette Austattung des Mikroskops: - Zeiss Standard 20 inkl. Durchlichtbeleuchtung (P/N 450805) - Zeiss Binokulartubus ( - Zeiss 2x Okulare KF 10X/18 Brille (P/N: 464026) - Zeiss XY Kreuztisch mit Objekthalter inkl. Feder (P/N: 473405) - Zeiss 4-fach Objektivrevolver mit folgenden Objektiven: - Zeiss Plan 2,5 / 0.08- Zeiss 10x / 0.22 (P/N: 460400) - Zeiss 40x / 0.65 (P/N: 460700) - Zeiss 100x / 1.25 Oil (P/N: 461900) - Zeiss Kondensor mit Apertur und Einschub für Ringblendenträger Phasenkontras - Zeiss Leuchtfeldblende außerdem noch folgendes Zubehör:- Zeiss Filter CB 12 (P/N: 467850) - Zeiss Ersatz Halogenlampe - Zeiss Inbusschlüssel - Zeiss Immersionsöl 518 C (2 Stk.) - Zeiss Bedienungsanleitung - Zeiss blaue Abdeckhaube Das Mikroskop ist in einem guten Zustand und selbstverständlich voll funktionsfähig.

*No PAT record* Prior PL012 Binocular Microscope With 4 x Objectives This item was removed from a un (more)iversity lab where it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. Includes 4 x objectives:- EA 100 Oil 1.25 160/0.17 - EA 4 0.10 160/- - EA 10 0.25 160/- - EA 40 0.65/0.17 Also includes 2 x WF 10X/20 Eyepiece. Model: PL012S/N: 57428

Motic AE21 Series Trinocular Inverted Microscope with 3x Objectives This was removed from a working  (more)lab where it was surplus to requirements. The unit has been tested and is in good working order. It is in very good cosmetic condition with minor marks It is fitted with the following; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 3 x Objectives: 1x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

Leica HC PL FLUOTAR 40x/1.30 OIL ∞/0.17/OFN22/E Microscope Objective This is being sold on behalf of (more) a client. This is a very rare 40x PLAN FLUOTAR Oil Objective with a high numerical aperture of 1.30. This high NA is very hard to achieve in production with 40x so most companies don't even attempt to create it, due to the cost of high-quality optics and technology required.  This objective allows to have a large field of view with high resolution at 1.30 NA. The objective is in as new condition and has only been used for 1 demonstration. The objective is listed for collection only, but we can potentially ship it if needed.The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Beam scales C315.4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the C315.4P2 scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales C315.4P2 series is manufactured in mild steel powder coated version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.