Heidolph Heidolph SP quick (wt 1.6 mm) Single-Channel Pump Head

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Vinitex Door cabinet high LT White 600

Temperature range: 25 – 200°C Temperature stability (at 70°C): ±0.02°C Maximum pump flow: 10 l/min M (more)aximum pump pressure: 0.2 bar Internal dimensions (HxWxD): 200 x 285 x 490 mm Dimensions (HxWxD): 410 x 360 x 590 mm Equipped with a height adjustable submersible platform Platform dimensions (WxD): 250 x 295 mm Height adjustment: 180 mm

Dimensions (folded up) HxWxD: 8x20x35.5cm. 40mm dia. lens (magnification 8X) removable and with adju (more)stable focus. Accommodates by 3 capillary tubes. Temperature range ambient is up to 400 ºC. Temperature resolution ± 0.1°.

Grant Instruments BTA Dry Block Heating System for 24 tubes Easy and precise temperature setting Hea (more)ting range ambient + 5degC to 100degC, with rapid heat-up time Stability and uniformity +/- 0.1degC Capacity : 24 tubes of 15ml Compact, sturdy design

MULTISTIRRER 15 Velp multiposition magnetic stirrer MULTISTIRRER 15 is a 6-place magnetic stirrer fo (more)r ø 85 mm beakers. Designed to last, these tools feature a stainless steel top that is resistant to chemical corrosion. It is possible to set a common speed up to 1500 rpm, with the electronics guaranteeing good speed regulation even at low rpm. Even after several days of operation, the instruments do not overheat, which is a highly valued feature in microbiology and biochemistry. It is possible to thermostat the samples by combining MULTISTIRRER with a recirculating water bath. ROBUST AND PRACTICAL - The control panel is protected from liquid spills - Heavy duty steel construction with epoxy coating - Stainless steel cover - Very low height - ergonomic - Lightweight, easy to move - Designed for maximum durability and backed by a 3 year warranty THE ADVANTAGES OF THE VELP MICROSTIRRER - Clear surface for viewing particles and color changes - It doesn't get hot, even after days of continuous use - Can thermostat samples using a recirculating water bath - Ideal for microtitration, microbiology and biochemistry - Soft start but quick achievement of the set speed - High power magneto 'PCM' driven by single phase motor for continuous operation

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

Expanded bed adsorption (EBA) is a single pass operation to recover target molecules such as protein (more)s from crude stock feedstock without prior clarification. In extracellular processes, EBA is effective in capturing molecules from fermentation or cell culture. In intercellular processes with soluble molecules, it is suitable for use with broth from cell lysis or homogenization. Streamline columns are specially designed for use with Streamline adsorbents. Column design incorporates spacial flow distributors and a moveable adaptor. The distributor at the bottom of the column creates the stable fluidized bed required for the technique. The moveable adaptor allows the bed height to be adjusted for elution in sedimented bed mode. Diameter: 25 mm Column cross section: 491 mm2 Tube height: 1000 mm Stand foot print: 430 x 430 mm Sedimented bed height: 150 – 300 mm Sedimented adsorbent volume: 75 – 150 mL Max pressure: 1 bar Operating temperature: 4°C to 40°C Feed application: 200 – 400 cm/h Elution sedimented bed: 50 – 150 cm/h Elution expanded bed: 100 – 300 cm/h Chemicals used with Streamline 100 column: Acetic acid: Concentration – 25%, pH = 1.8; Time/cycle – 3 h Acetone: Concentration – 2%; Time/cycle – 15 min Ammonium sulphate: Concentration – 2 M; Time/cycle – 5 h Ethanol: Concentration – 20%; Time/cycle – 24 months Ethanol: Concentration – 70%; Time/cycle – 1 h Ethanol/Acetic acid: Concentration – 20%/10%; Time/cycle – 3 h Ethylene glycol: Concentration – 50%; Time/cycle – 3h Guanidine-Hydrochloric acid: Concentration – 6 M; Time/cycle – 5 h Glycerol: Concentration – 10%; Time/cycle – 3 h Hydrocloric acid: Concentration – 0.1 M, pH = 1; Time/cycle – 1 h Isopropanol: Concentration – 30%; Time/cycle – 3 h Sodium acetate/Ethanol: Concentration – 0.2 M/20%; Time/cycle – 24 h Sodium chloride: Concentration –  0-3 M; Time/cycle – 3 h Sodium hydroxide: Concentration – 2 M, pH = 14; Time/cycle – 24 h Sodium hydroxide: Concentration – 0.01 M, pH = 12; Time/cycle – 12 months Sodium sulphate: Concentration – 1 M; Time/cycle – 3 h Triton X 100: Concentration – 1%; Time/cycle – 5 h Tween: Concentration – 1%; Time/cycle – 5 h Urea: Concentration – 8 M; Time/cycle – 5 h

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW