HEIDOLPH 32 mm clamping nut

Manufacturer: Cohesive Technologies Model: TurboFlow HPLC Cyclone P 0,5 x 50 mm P/N: 952707 S/N: 618 (more)029 Description: TurboFlow HPLC Cyclone P 0.5 x 50 mm. Items delivered: - Cohesive Technologies TurboFlow HPLC Cyclone P 0.5 x 50 mm Condition: The column is in new condition, fully functional and ready for you to use.

Collection bottle (PP) capacity: 5L Max pumping speed 50/60Hz: 1.9/2.2 m3/h Ultimate total pressur (more)e (absolute): 100mbar 230V / 50-60Hz / 120W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Vortex stirrers with Ohaus microplate The high speed and small orbit make these mixers perfect for m (more)ixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Microplate support (Single) (code 30400215) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Communication N / A Structure Cycoloy Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Sample preparation stirrer Modernize your laboratory with Guardian 5000 Series shakers, designed to  (more)be safe and deliver exceptional safety and superior performance. Numerous cutting-edge Ohaus features: - SafetyHeat system to protect the laboratory: an industry-leading sensing system uses two independent safety controls to continuously monitor the electronics and shut off the heat before it overheats - Powerful and consistent shaking performance: precise stirring from 60 to 1600 rpm is made possible by the design of a powerful, robust motor with magnet and software controlled ramp rate, ensuring safe stirring even for viscous applications. - Easy to read LCD display with everything you need to know: the bright LCD display includes temperature and speed settings, intuitive icons and hot top indicator - Durable and reliable with SmartHousing: smartHousing is resistant to chemicals with an innovative and easy to clean design; the lines allow any liquid spills to drain out of the instrument Available models: Model e-G51HP07C: plate 178x178mm; flow rate 15 litres; ceramic plate; heating up to 500°C. Model e-G51HS07C: plate 178 x 178mm; flow rate 15 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HS10C: plate 254x254mm; flow rate 18 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HSRDM: plate Ø135mm; flow rate 18 litres; aluminum plate; heating up to 380°C and stirring up to 1600rpm. Model e-G51ST07C: plate 178x178mm; flow rate 15 litres; ceramic plate; stirring up to 1600rpm. Applications Boiling water, water/oil bath preparation, sample and solution preparation, dissolution buffers and reagents, sample concentration Display Backlit LCD display for temperature and speed, green lights when unit is heating and agitating, prominent hot light, probe in use icon, single point calibration icon Operation Stirring from 60 to 1600 rpm, ambient temperature range from +5°C to 500°C (ceramic top) or 380°C (aluminum top), power cord (included), the stirring models include a 1.5” (3.8cm) PTFE coated stir bar Construction Probe connection, SmartHousing™ stays cool to the touch and is resistant to chemicals, IP21 rated, polycarbonate front panel, control knobs, On/Off switch to disconnect heater, integrated pole holder, easy-to-use ceramic or aluminum tops to clean Characteristics Hot top light, audible alarm, SafetyHeat™ protection shuts down heater in case of malfunction, temperature calibration function for 3 probes and 3 platen setpoints

The unit is build as a cell holder and stirrer for Franz diffusion cells, and in the same time as te (more)mperature conditioned water supply for the Franz cellsin order to keep temperature of the permeation experiments during the run. The temperature conditioned water is coming from an external heater-circulator with thermostat (not included). Cell orifice diameter: 15 mm (+0.5 mm, typically within +0.3 mm) Cell volume: 7 mL (+0.5 mL of stated, typically within + 0.3 mL) Stirring: 500 rpm Dimensions (WxDxH): 457 x 203 x 184 mm Weight: 8.96 kg

Various S+B hanging cabinets for under laboratory tables. Out of stock Model A Large cabinets aviabl (more)e with shelves à € 150,= Dimensions (h x w x d): 600mm x 1200mm x 460mm Internal dimensions (h x w x d): 560mm x 1160mm x 435mm Model B Small cabinets aviable with either shelves or drawers à € 75,= Dimensions (h x w x d): 600mm x 600mm x 460mm Internal dimensions (h x w x d): 560mm x 560mm x 435mm Out of stock Model C Plain small cabinets Dimensions (h x w x d): 450mm x 600mm x 460mm Internal dimensions (h x w x d): 390mm x 560mm x 435mm0 Out of stock Model D Small cabinets with drawers Dimensions (h x w x d): 450mm x 600mm x 460mm Drawer dimensions (h x w x d): 70mm x 505mm x 395mm Model E Cabinets with drawers Dimensions (h x w x d): 450mm x 600mm x 460mm Small drawer dimensions (h x w x d): 70mm x 505mm x 395mm Large drawer dimensions (h x w x d): 225mm x 505mm x 395mm

Thermo Scientific Cimarec-i Telesystem 15-40 Multipoint Shaker New equipment in its original packagi (more)ng Reference: Cimarec i 50088036 Set comprising a magnetic induction stirrer (without motor) and a remote control box. 15 stirring stations Ideal for use in immersion in water baths up to 50°C Automated start-up for progressive acceleration of the magnetic bar Perfect for use in incubators and climatic chambers Delivered complete with Telemodul control box Telesystem 15.40: With Telemodul 40 C remote control box Speed ​​range: 100 to 2000 rpm Volume: up to 1200 ml per stirring station Dimensions: L x W x H: 240 x 420 x 35 mm Protection: IP 68 Weight: 8kg Ambient conditions: Permissible temperature: -10 to +56°C / RH: 100% Gross weight: 11.677 kg Gross dimensions: 57.5 x 39 x 34.5 cm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW