Filtration ramp system Microfil

PALL ICELLIS Nano Perfusion Module This was removed from a university lab where it was surplus to re (more)quirements. We do not have the correct PSU so it has not been tested. It is in good cosmetic conditon with minor marks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-05273 Honda GX160 compressor motorITEM-03947 Crestron ST-COM Two Port RS-232/422 Expansion Module ITEM-10656 17x Multi-Type Centrifuge Rotor Buckets ITEM-13026 Eppendorf 5415 Centrifuge Rotor Lab Equipment ITEM-41098 5 x Tube RacksITEM-41099 Microscope Parts/StagesITEM-41100 Fume ExtractorITEM-40046 Olympus objectives x 2 (damaged)ITEM-41101 Grant GD100 Water Bath ITEM-41102 Grant GD100 Water Bath ITEM-41103 Grant SUB Aqua Pro Water Bath ITEM-40053 Warner Model TC-324B Automatic Temperature Controller ITEM-40054 BURLEIGH PCS-5000 SERIES MICROMANIPULATOR ITEM-40057 PCO.Imaging SensiCam, 12bit Cooled CCD CameraITEM-41114 Fisherbrand FB55147 ITEM-41115 Brand UV CuvettesITEM-41116 2 Cell Changer ITEM-41117 2 x SUB Aqua 5 Plus Water Baths ITEM-41118 Leitz Laborlux 11 Microscope ITEM-05775 A & D HR-120 Digital Laboratory Precision Balance Scales ITEM-41120 Brady TLS 2200ITEM-41121 Isopad Isomantle ITEM-41119 Perkin Elmer Gemini Hydraulic Press ITEM-10742 Kobold OVZ-30-II Oval Gear Flowmeter With Red Lion Digital Meter ITEM-40073 HP Hub ITEM-40075 STUART UC151ITEM-40051 kikusui PAB 350 ITEM-39935 EPPENDORF CENTRIFUGE 5415 R ITEM-39936 Trust Power Supply ITEM-39940 Trust Power Supply ITEM-41143 Impax-140ITEM-41144 impax im-mma140ITEM-40995 Water PumpITEM-40996 Quantachrome Manuals/Glassware ITEM-40997 Water Pump ITEM-26001 Draper BD13/5 Bench Drill Press ITEM-41000 Grant Water Bath ITEM-41001 Parr Pressure Reactor ITEM-41002 Buchi Waterbath B-481

Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V Setting Temperature Range +20°C to +80 (more)°C Setting Temperature Accuracy 0.1 °C Chamber Volume 108 L (3.8 cu. ft.) Features - Internal volume of 108 L (3.8 cu. ft.) - Temperature range from +20°C to +80°C, with working range at least 5°C above ambient - Precise temperature accuracy of 0.1 °C using dual Pt100 sensors - Control panel includes TwinDISPLAY with two high-definition TFT-color displays - Programmable with AtmoCONTROL software via USB or Ethernet interface - AutoSAFETY system with integrated over- and under-temperature monitor and alarm - Easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing and large-area heating on four sides - Maximum chamber load of 386 lbs. (175 kg) with five shelves The Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V is crafted for precision in heating and reliability, ideal for laboratories requiring consistent temperature control for paraffin-based applications. With a spacious 108 L (3.8 cu. ft.) capacity, this oven provides ample room for versatile lab applications. Its advanced natural convection system delivers even heat distribution within a temperature range of +20°C to +80°C, and the dual Pt100 sensors in a 4-wire circuit offer an impressive 0.1°C temperature accuracy, ensuring reliable sample integrity and uniform heating across the chamber. This oven features Memmert's TwinDISPLAY control panel, equipped with two high-definition TFT color displays that allow users to easily monitor and adjust settings. AtmoCONTROL software provides additional functionality, enabling precise programming, management, and data transfer via USB or Ethernet. Integrated safety functions include AutoSAFETY, with over- and under-temperature monitoring, and visual and acoustic alarms, offering reliable performance and protection. The oven’s nearly gas-tight, stainless steel interior is reinforced and easy to clean, making it an efficient, durable choice for labs focused on maintaining high standards of accuracy and safety. INCLUDED: TheMemmert UN110PA Natural Convection Paraffin Oven 108L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The analog output module converts the scale output signal (mass) into an analog signal. The mass val (more)ue is most often represented in the form of a 4-20 mA current signal. Due to the low resolution of the module (several thousand), such a signal is used in automation for processes that do not require high precision. Analog output module is available in: IM01.EX-2 communication module and MW01-A7 weighing module, and for an extra charge in PUE HX7 and PUE HY10 terminals.

Memmert UN55 Natural Convection Oven 53L, 115V Temperature Range Ambient +5°C to 300°C Convection T (more)ype Natural Convection Chamber Volume 53L Features - 53-liter chamber volume accommodates various sample sizes, enhancing lab versatility - Precise temperature control from +5°C above ambient to 300°C for sensitive applications - Ergonomic PID controller with high-definition TFT display for intuitive adjustments - Durable stainless steel interior and exterior, corrosion-resistant for rigorous use - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with adjustable air flap for temperature uniformity - Adaptive settings include programmable temperature, timer, and setpoint wait for workflow optimization - AtmoCONTROL software for data logging and remote monitoring via Ethernet - Easy-to-clean stainless steel interior with reinforced ribbing, ideal for frequent use The Memmert UN55 Natural Convection Oven 53L, 115V delivers precise temperature control from +5°C above ambient to 300°C, making it ideal for a variety of sensitive applications. Featuring an ergonomic digital PID controller with a high-definition TFT display, this oven offers intuitive settings and rapid access to temperature adjustments. Built for rigorous lab environments, its durable stainless steel construction resists corrosion, while the natural convection system ensures even, consistent heating distribution across all samples. Fully adjustable safety controls, including a built-in overtemperature monitor, provide added protection and peace of mind. With an easy-to-clean interior and robust stainless steel shelving, the UN55 maximizes efficiency in daily operations, delivering reliable performance for years to come. INCLUDED: The Memmert UN55 Natural Convection Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty