Hermle 4 x 50ml insert, 2/pk.

Interscience Spiral easySpiral Pro Automatic Spiral Plater This was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and appears to run through test sequences. The item is in a reasonable, used cosmetic condition with marks from use.

Scilogex MicroPette Pipettor, 0.1-2.5μl The Scilogex MicroPette Pipettor, 0.1-2.5μl has a volume ran (more)ge of 0.1-2.5µl with an accuracy of 2.50/3.00/12.00±%. INCLUDED: The Scilogex MicroPette Pipettor, 0.1-2.5μl includes: - Calibration/Opening Tool - Grease - Tip - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle 30 x 15 ml Rotor The Hermle 30 x 15 Rotor is a high-quality accessory designed for use with t (more)he Z326 and Z326 K centrifuges. With speeds of up to 4,500 RPM and a maximum RCF of 2,830 x g, this rotor provides exceptional performance for a range of laboratory applications. It can accommodate up to 30 tubes, each with a maximum capacity of 15 mL, and is equipped with a snap-on lid and locking mechanism to ensure the safety of your samples during centrifugation. Made with durable materials, the Hermle 30 x 15 Rotor is built to last and its compact and user-friendly design makes it easy to install and remove. Whether you're working with DNA, RNA, proteins, or other biomolecules, this rotor is a reliable and versatile accessory that will enhance the performance of your Z326 or Z326 K centrifuge. Hermle 30 x 15ml Rotor Technical Specifications:Maximum Speed (RPM)4,500 RPMMaximum RCF2,830 x gCapacity30 x 15mlINCLUDED: The Hermle 30 x 15 ml Rotor includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Beckman L8-80 Ultracentrifuge Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal. Due to the above faults, this item is listed as Spares/Repair. The 3-phase plug has been removed and there is no rotor included in the sale. Also included: 1 x Operation Key1 x Original User Manual

LED illuminated shelves Homogeneous illumination and constant temperature ensure the same conditions (more) between the different samples, on the entire shelf. FOC 200IL is ideal for a wide variety of applications including plant growth, seed germination, cultivation, insect and small animal husbandry, cultured bacteria and fermentation studies FOC200IL is equipped with 2 illuminated shelves each consisting of six LED bars mounted horizontally in the lower part, so as to illuminate the shelf below. It is also equipped with a timer for the lights. Thermoregulation and thermal stability at their best - The Auto-Tuning thermoregulation system guarantees excellent thermal homogeneity and stability (± 0.5°C) - Ecological cooling system and low operating costs - Selectable incubation temperature and working range from 3°C to 50°C - Uniform temperature thanks to VELP ventilation technology - 3-digit DIGITAL DISPLAY, resolution 0.1°C - Transparent internal door for observation of the sample without temperature alterations - Customizable lighting cycle timer - Equipped with 2 illuminated shelves (30,000 lux / shelf), each with six LED bars mounted horizontally under the shelf - Volume of 169 liters net - Internal sockets to power devices - Intuitive digital interface, with three buttons for easy setup of the instrument - Constant monitoring according to GLP (Good Laboratory Practice) - Adjustable recording time (in case of connection to VELP Ermes and TempSoft ™) - The optional TempSoft ™ incorporates high / low alarm thresholds - Quick and easy calibration - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with Good Laboratory Practice (GLP)

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 36 C model - Tank volume min. 28 L - Tank volume max. 36 L - Tank opening 585 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) Particularly in (more) the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® Crack 80 is ideal for vessels with the following characteristics: ideal vessel diameter: 133-200 mm, ideal ground clearance: 24 mm, ideal filling level: 133-200 mm, ideal volume: 1,900-6,300 ml. The VISCO JET® Crack 80 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

S+B Plinth Cabinet 5 Drawer White 600

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW