Filtration ramp system Microfil

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco Filter Paper, Package of 1000Fits into topof flask to prevent partial loss of product durin (more)g freeze drying. 1" diameter (28 mm). Pore size 17 microns.No complexfilter retainer neededINCLUDED: The Labconco 7544810 Filter Paper, Package of 1000 includes: - 1000 Labconco 7544810 Filter Papers - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

ZYMARK TurboVap II Evaporation/Concentrator System The Turbovap 2 has 6 sample positions of 200 ml T (more)he TurboVap II Concentrator Workstation is a microprocessor-controlled concentrator that provides automated sample evaporation, unattended operation, convenience and speed. Water bath capacity: 6.4 L of distilled water Gas Supply Requirements: Minimum inlet pressure 30 psi/2.1 bar. Maximum inlet pressure 80 psi/5.5 bar. Power supply: 220–240 V~, 50 Hz, 5 A Dimensions (LxDxH): 53.8 cm x 30.5 cm x 30.5 cm / 21.2" x 12" x 12" Weight 18.4 kg/40.5 pounds Without tubes / Matra With traces of rust Functional heating system No leak optical sensor not checked

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 StripsEZee mini cen (more)trifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch.Product Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - Power Cord - Two Year Manufacturer's Warranty

Gilson F171501 PIPETMAN DIAMOND Tips D1000ST, 100-1000uL The Gilson F171501 PIPETMAN DIAMOND Tips D1 (more)000ST, 100-1000uL are designed to fit your PIPETMAN perfectly. They deliver accurate and precise pipetting when used in conjunction with Gilson pipettes. One commercial unit/quantity of the autoclavable TIPACK includes 10 racks of 96 tips (total of 960 already racked tips). These tips are fully autoclavable and color-coded for easy identification while being compliant with Good Laboratory Practice (GLP). Using PIPETMAN DIAMOND Tips with your PIPETMAN ensures maximum accuracy and precision and delivers consistent results. The perfect air-tight seal prevents leaks. The tips are made of pure polypropylene to deliver the correct volume and ensure complete dispensing. Volume graduations make it easy to visually check the volume aspirated. Gilson tips are manufactured in a clean room environment ensuring they are free of detectable contaminants that can affect your results. From mold to bench, our tips are guaranteed, certified, and traceable to meet the most stringent demands in many applications. Uniquely designed TIPACKS feature a dual-purpose lid: hinged to easily open and close while using tips; or simply pull it out of the hinges to set on top or discard for high-throughput tip usage. TIPACKS are compact, ergonomic, and eco-friendly. INCLUDED: The Gilson F171501 PIPETMAN DIAMOND Tips D1000ST, 100-1000uL includes: - 10 Racks of 96 Non-Filtered Tips - 3 Year Manufacturer's Warranty