PALL ICELLIS Nano Perfusion Module Lab

PALL ICELLIS Nano Perfusion Module This was removed from a university lab where it was surplus to re (more)quirements. We do not have the correct PSU so it has not been tested. It is in good cosmetic conditon with minor marks.

HANNA HI97733 Ammonia Photometer, up to 100.0 mg/L New equipment in its original packaging HI97733 c (more)omes with 2 measuring cuvettes, plastic stoppers and caps and batteries. Range: 1.0 to 100.0 mg/L (NH4+) Resolution: 0.1 mg/L Accuracy at 25°C: ±0.5 mg/L ±5% of reading Method: Adaptation of the “ASTM Manual of Water and Environmental Technology, D1426-92” method, Nessler method Light source: LED with 420 nm narrow bandwidth filter Light detector: Silicon photocell Batteries/Lifespan: 3 x 1.5 V AA / > 800 measurements without backlight On-demand storage: Up to 50 measurements for on-screen recall Auto-off: After 15 minutes of non-use / After 30 min of non-use before a measurement Dimensions/Weight: 142.5 x 102.5 x 50.5 mm / 380 g

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Scientific Industries MegaMag Genie High volume magnetic stirrer designed for large capacity applica (more)tions. Powerful magnet and motor offer exceptional magnetic force capable of stirring up to 38L.Scientific Industries MegaMag Genie SpecificationsSpeed (RPM)250-1300Maximum Stirring Positions1Stir Bar Maximum Length7.6 cm (3in)Top Surface Dimensions (D x W x H)305 x 305mm (12 x 12in)Timer1-99 minutes or continuousProduct Weight3 Kg (6.6 lb)Overall (D x W x H)310 x 305 x 130mm (12.25 x 12 x 5.1in)Maximum Stirring Capacity38 LBody MaterialABS/PolycarbonateComparison of ModelsSpecificationScientific Industries SI-2236 MegaMag GenieScientific Industries SI-3236 Digital MegaMag GenieScientific Industries SI-3236L MegaMag Genie LRSpeed (RPM)250-1300 RPM250-1300 RPM50-300 RPMStir Bar Maximum Length (cm/in)7.6 cm (3in)7.6 cm (3in)7.6 cm (3in)Top Surface Dimensions (D x W x H)305 x 305mm (12 x 12in)305 x 305mm (12 x 12in)305 x 305mm (12 x 12in)Timer1-99 minutes or continuous1 second - 99 hours1-99 minutes or continuousOverall Dimensions (D x W x H)310 x 305 x 130mm (12.25 x 12 x 5.1in)310 x 305 x 130mm (12.25 x 12 x 5.1in)310 x 305 x 130mm (12.25 x 12 x 5.1in)Maximum Stirring Capacity (L)38 L38 L38 L.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters