Duran Exsikkator Planflansch + Deckel Porzellan Lochplatte 200mm

Polyscience P10N8A101B IP-100 Immersion Probe Cooler, 0.7 Rigid Cold Finger Probe, -100 to -60C, 120 (more)V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N8A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 20 x 1.2-5ml Adapters, Cat. # 022638707 The Eppendorf 20 x 1.2-5ml Adapters, Cat. # 022638 (more)707 are for use with the Eppendorf A-4-81 Swing Bucket Rotor for the Eppendorf 5810/R Centrifuges. These adapters feature a capacity for 20 x 1.2-5ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 11mm x 118mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 20 x 1.2-5ml Adapters, Cat. # 022638707 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 20 x 1.2-5ml Adapters, Cat. # 022638707 SpecificationsBottom ShapeRoundRotor CompatibilityEppendorf A-4-81 Swing Bucket Rotor

Benchmark Block, 35 x 1.5ml The Benchmark Block (for 35 x 1.5ml) for use with the MultiTherm Heating (more) Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 35 x 1.5ml includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

220V, 50/60 Hz, 5W.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

Scilogex MicroPette Pipettor, 5-50µl The Scilogex MicroPette Pipettor, 5-50µl has a volume range of  (more)5-50µl with an accuracy of 0.60/0.90/2.00±%. INCLUDED: The Scilogex MicroPette Pipettor, 5-50µl includes: - Calibration/Opening Tool - Grease - Tip - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 700201000 FreeZone 2.5L -50 C Complete Freeze Dryer System Features - Patented moisture sen (more)sorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 2.5L -50 C Complete Freeze Dryer System includes the Labconco 700201000 2.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV3 Vacuum Pump. Features of the Labconco 2.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector: Upright stainless steel collector coil holds 2.5Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuumpump from costly damage: A vacuum break valve bleeds air into the system whenpower to the freeze dryer or vacuum pump is shut off for more than 5 minutes. Amoisture sensor prevents refrigeration or vacuum start-up when moisture isdetected in the drain line. Vacuum pump is automatically shut down when a leakis present in initial pull down or during run. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. The Edwards RV3 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 2.5L -50 C Complete Freeze Dryer System includes: - Labconco 700201000 FreeZone 2.5L -50°C Benchtop Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV3 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf A-4-81 Microplate MTP Buckets # 022638840 The Eppendorf 022638840 Replacement MTP/Flex Buc (more)kets for Rotor Model A-4-81-MTP (Pack of 4) is a reliable and durable solution for your laboratory's sample processing needs. These replacement buckets are designed to fit the A-4-81-MTP rotor, ensuring seamless integration with your Eppendorf centrifuge system.The buckets have a user-friendly design and a secure locking mechanism that keeps your samples safe during centrifugation. With a capacity of up to 4 microtiter plates, they offer ample space for a range of laboratory applications, including working with DNA, RNA, proteins, and other biomolecules.Upgrade your lab's sample processing capabilities with the Eppendorf 022638840 Replacement MTP/Flex Buckets for Rotor Model A-4-81-MTP and experience the exceptional quality and reliability that Eppendorf is known for. Eppendorf A-4-81 Microplate MTP Buckets #022638840 Technical SpecificationsMaximum Rotational Speed4,000 RPMMaximum RCF2,900 x gINCLUDED: The Eppendorf A-4-81 Microplate MTP Buckets # 022638840 includes: - Full 6 Month Parts and Labor Warranty

This listing is for a Stuart UC152 Hotplate StirrerGeneral purpose, reliable stirrer/hotplates with  (more)compact 150X150mm top plate. These units have microprocessor control of temperature allowing a calibrated scale to be printed around the control dial in °C. With a choice of robust aluminium or chemically resistant ceramic tops and advanced saftey features: Flashing 'hot' warning light to warm when top plate is too hot to touch. Spillproof design to deflect spills away from the controls abd the user. Independent saftey circuit to protect against overheating. Microprocessor control for accurate temperature setting. The 'hot' warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speeds up to 2000rpm and is capable of mixing large volumes (up to 15 litres). Model UC152 has a glass ceramic top which has excellent chemical resistance and allows high plate temperatures for faster heating. Max temp: 450°C