Meridian Bioscience illumipro-10 Incubator Reader Laser Diode DNA Amplification

Manufacturer: Meridian Biosciene, Inc. Model: illumipro-10™ Incubator Reader with Thermal Printer P/ (more)N: 610172 S/N: IP2010 Description: The illumipro-10™ is an automated isothermal amplification and detection system for use with Meridian Bioscience, Inc. illumigene® Loop-Mediated Amplification products.The illumipro-10™ is intended to be used by trained laboratory professional users in laboratory settings. Isothermal amplification is carried out by two independently controlled heat blocks capable of operating between 55 C and 65 C, and within 1 C of the temperature set point. The isothermal amplification temperature set point is dictated by the illumigene Assay selected. Isothermal amplification time is monitored by the illumipro-10’s internal timer. When in operation, the illumipro-10 will display ‘Test in Progress’ as well as block temperature and incubation time remaining. DNA amplification detection is completed by the illumipro-10 optics system. Each illumipro-10 block contains laser diodes illuminating at 650 ± 20 nm and corresponding detectors monitoring light transmission across each illumipro-10 well. The illumipro-10 performs an initial check of the optics system prior to run start. Observed failures in the optics system disable the instrument block until the failure can be resolved. After successful optics verification, the illumipro-10 checks for the presence of an illumigene test device in each well. The illumipro-10 automatically enters a Sample ID of ‘EMPTY WELL’ for all wells that a test device cannot be detected in. The illumipro-10 measures the absorbance of each illumigene test device at the beginning and end of the isothermal amplification incubation. Sample results are reported as INVALID, POSITIVE, or NEGATIVE based on the observed change in absorbance. Key Facts: • Optimal flexibility for stat or batch runs• True walk away capability for optimized workflow• Very low maintenance requirements enhance efficiency• Instrument verifications can be performed with in-house personnel Features: • Digital Display (guides users through process)• Automatic system self-check• Reaction Blocks (operate independently)• Barcode reader (for sample ID entry)• Small Footprint (of instrument is only 21 cm x 29.2 cm) Performance features of the illumipro-10 include the following: • Self-diagnostics are performed at power-on and at Run start• Self-diagnostic for Test Device Placement and Optics Path Verification• Lid Closure Detection and Lid Lock Feature• Thermal Heat Block with Optics Detection at each well with Visible Light Emission/Absorbance (650 ± 20 nm)• Interval Timer with Real-Time Assay Processing Time Display• Simple LCD User Interface for Instrument Set-up, Program Selection and Sample Identification Input• Barcode Scanner for Sample Identification entry• External Keyboard available for Sample Identification entry• Attached Printer for results reporting• Control of amplification product carry-over through use of the self-contained illumigene Test Device Items delivered: - Meridian Bioscience illumipro-10 Incubator Reader- Meridian Bioscience illumipro-10 Thermo Printer- Power Cord & Connection Cables- Instruction Manual The incubator reader is in absolutely like new condition and 100% functional tested.

€2,500.00 ex VAT

€2,975.00 incl. VAT if applicable

Germany

general laboratory equipment other

HPLC Column Storage PcolSafe

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

€250.00 ex VAT

€297.50 incl. VAT if applicable

Germany

general laboratory equipment other

Beckman Beckman JA-20.1 Rotor

Refurbished Beckman JA-20.1 Rotor. 6 months warranty. The Beckman JA-20.1 fixed angle rotor is used (more)with Beckman J2 and J6 series and Avanti J series centrifuges. The JA-20.1 can reach speeds up to 20,000 RPM with a max RCF of 51,500 x g. Capacity is 32 x 15ml. Technical data: - Maximum Speed: 20,000 rpm - Maximum RCF at r max (g): Outer Row: 51,500 x g; Inner Row: 43,900 x g - k-Factor: Outer Row: 371; Inner Row: 465 - Nominal rotor capacity: 480 ml - Capacity: 32 x 15 ml tubes

€2,900.00 ex VAT

Germany

general laboratory equipment other

Laboratory Oven STF-N 52 FALC

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS: - External structure in steel painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD: - PID thermoregulator with double display and adjustable temperature up to 300°C - 2 shelves - pipe on the back for exhaust fumes with front opening/closing adjustment device - 10 mm hole on the upper side - Digital timer from 0 to 99 hours and 59 minutes + ∞ - Indication of the power used - Auto-tuning (automatic temperature calibration) - Possibility of manual temperature correction (e.g. with certified thermometer) - Safety class DIN 3.1, the highest - Manual adjustment of the over-temperature alarm - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

€1,306.20 ex VAT

€1,554.38 incl. VAT if applicable

Italy

general laboratory equipment other