Meridian Bioscience illumipro-10 Incubator Reader Laser Diode DNA Amplification

CABINET FIRE Series MY11 Gray 60 BASIC - CHEMISAFE - Entirely made of 1 - 1.5 mm thick electrogalvan (more)ized sheet steel, cold bent - Gray RAL 7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to standard 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded cabinet - Adjustable leveling feet - Door with lock and key - 3 shelves in painted steel (BASIC series) or in stainless steel (EASY series) adjustable in height, 1 retention tray with grid - Shelf fixed with aluminum pins, excluding all risk of sparks - Shelves tested for fire resistance - ISO 3864: Signs with pictograms - Certified with fire resistance 90 minutes, according to the EN14470-1 BV standard (Bureau Veritas) - Certified according to the EN16121 BV standard (Bureau Veritas) - Easy replacement of spare parts in case of damage - Available in the version with double capacity and external dimensions WxDxH: 200x600x1950mm Supplied: - 3 painted steel shelves (max load 60 kg evenly distributed) + 1 pan with grid (capacity 20 litres) - Door hinge on the left, on request on the right Optional: - Shelves - Timer - Open door alarm - Ventilation - Electric aspirator - Activated carbon filter - Cooling system - Internal carbon dioxide system with automatic thermal activation (62°C)

Defender 6000 advanced IP68/IP69k washable bench scale Versatile, precise and extremely resistant. S (more)uitable for extreme humid environments, the new Defender® 6000 bench scale has been designed to offer an IP69K degree of protection and meet the hygienic demands of the chemical and food industries. For years, operators in the food, chemical and pharmaceutical industries have chosen Defender bench scales from OHAUS for their exceptional reliability, accuracy and versatility. - Resistant to intensive washdowns in processing and packaging environments: IP68/IP69K, - NSF certified and supports HACCP systems with a 316 stainless steel base: Corrosion protection in food and chemical processing and packaging. - Large display and different application modes - Connectivity: GLP/GMP data output with real-time clock Control panel DT61PW, for Defender 6000 Hybrid Easy to use thanks to its five buttons and its large and bright LCD screen. They offer an optional infrared communication kit to connect without opening the housing. The indicator is capable of storing up to 1,000 weighing results which can be transferred to a PC or system for traceability. PW models can run on standard D-cell batteries for up to 1,600 hours. D61XWE control panel, for Defender 6000 in stainless steel. Bar matrix display, cut resistant keyboard with dedicated keys for quick product changes and touchless sensor. They offer several connectivity options, including standard RS232 and integrated USB host. Optional: RS232/RS485/USB, analog output, Wi-Fi/Bluetooth, Ethernet and discrete I/O with relay. XWE models run on standard mains power, and optional external USB power bank support is available (up to 55 hours with 20,000mAh power bank). Models without column, Defender 6000 Front Mount Models without column, only with the DT61PW control panel, are also available for the Defender 6000 Hybrid. APPLICATIONS Weighing: Determine the weight of items in the selected unit of measure. Parts Counting: Count items of uniform weight. Advanced auto-optimization software recalculates the average piece weight as the overall weight increases. Checkweighing/ Checkcounting: Compare the weight of an item against target limits. Compare the count of a package against target limits. Bar matrix or 3-color check light display give clear and bright indication of weight. Percent Weighing: Display the weight of an item as a percentage of a pre-established reference weight. Dynamic Weighing and Display Hold: Take an average of weights for an item over a period of time to account for vibration or other interference. The Display Hold feature manually or automatically holds the last stable weight of an item on the display. Available only in the i-D61XWE models: Filling: Fill a container to a target weight. 3-color bar matrix displays filling status. Connect with Discrete I/O option kit for an auto-filling system. Library and User Management: Up to 300 library items (stores part number, tare weights, APWs, under/over limits, set points or reference weight) can be shared within different weighing modes. Up to 100 user IDs can be stored for secure user access and traceability Resistance and practicality The Defender 6000 scale features a 316 stainless steel platform and frame, and an advanced wet-weather indicator with IP68/IP69K rating and hermetically sealed load cell, as well as a cut-resistant front panel. Plus, NSF Certified and USDA-AMS Approved; supports HACCP systems, for environments related to food safety. The scale can withstand any mishap, from food splashes to chemical splashes, and is sturdy enough to be washed down with a high pressure washer. Resistant to intensive washing typical of processing and packaging environments. Plus: 150% overload protection, password menu protection, menu and key lock, stability indicator, overload/underload indicators, low battery level indicator (i-DT61PW models), auto power off and automatic tare. A dedicated target key allows you to quickly configure over/under weight of packs, speed up line changes and simplify and customize templates for data printing. In the video: How to use the 'checkweighing' mode. In the video: How to use the 'fill' mode.

Manufacturer: Thermo Scientific Model:  Multifuge X3 FR Refrigerated Centrifuge           with TX-75 (more)0 Rotor with Round Buckets(4x Adapter: 2x 14x15ml / 2x 5x50ml Conical Tube) S/N: 41099204 P/N: 75004536 Description: Minimized footprints, maximized ergonomics - Floor models conserve valuable bench space, and have a footprint that is 24% smaller than the footprint of refrigerated benchtop models* - Low working height of 79 cm provides outstanding ergonomics when removing tubes and exchanging rotors - Fully portable with secure lockable castors— ideal for moving around the lab and easy cleaning, helping to prevent contamination Recommended for: cell culture, microplate, bioproduction, food safety, blood separation, bodily fluid processing, pharmaceutical, biotechnology, stem cell, microbiology, molecular biology, proteomics,and genomics applications Key Features: • SmartSpin technology optimizes acceleration and identifies unbalanced loads • Push-button exchange of rotors • ClickSeal bucket sealing system eliminates the need for screw caps or clips Specifications Multifuge X3 FR Floo Standing Refrigerated Centrifuge: Performance Swinging Bucket Rotors Maximum Capacity: 4 x 1000 ml (with TX-750 and BIOLiner rotors) Maximum Speed: 6000 rpm (with BIOShield 1000A rotor) Maximum RCF: 7164 x g (with BIOShield 1000A rotor) Performance Fixed Angle Rotors Maximum Capacity: 6 x 250 mL (with F14-6 x 250LE rotor) Maximum Speed: 15200 rpm (with 48x2 ml rotor) Maximum RCF: 25314 x g (with 48x2 ml rotor) Control system: microprocessor Drive system: direct, brushless induction low profile motor Rotor Locking System: Auto-Lock III Imbalance Detection System: SMARTSpin Programs: 99 (5 with direct access key) Temperature Set Range: -10 °C to +40 °C Maximum Timer Range: 99h, 59min + continuous Other Features: ClickSeal biocontainment system, language selection, motorized lid latch Max. power consumption: 1950 W Mains supply: 230 V Dimensions wit Lid closed (HxWxD): 84 x 56,5 x 67 cm Weight: 142,5 kg Specifications TX-750 Rotor: Part No.: 75003180 Rotor Capacity: 4 x 750 mL Max Speed: 4700 rpm RCF: 4816 x g Angle: 90° inclusive 4x Round Buckets (P/N:75003608) and 2x 14x15ml Conical Tube (P/N:75003639), 2x 5x50ml Conical Tube (P/N:75003638) Items delivered: - Thermo Scientific Multifuge X3 FR Floor Standing Refrigerated Centrifuge - Power Cord - TX-750 Rotor with Roundbuckets and Adapters - Instruction Manual as PDF via E-Mail The centrifuge is in perfect cosmetic as well as technical condition. - 100% functional tested (runs smooth and quiet).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW