AHF F37-446 BrightLine HC 445/45 Filter FF01-445/45/25 Semrock d=25mm NEW!

OhStriking the ideal balance of inventive features and functional and simple weighing capabilities,  (more)the OHAUS Adventurer Series presents all the applications you need for routine weighing and measurement tasks. Equipped with a color touchscreen, GLP / GMP compliance functions, two USB ports and much more, the Adventurer is the most complete scale in its class. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization / Statistics, Formulation, Density Determination, Display Hold Display 4.3 '' (109 mm) touchscreen display with VGA color graphics resolution and user-controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP / GMP data output. Structure Metal base, ABS top armor, stainless steel deck, glass screen with two-part side panels and sliding top door, front illuminated level indicator, integrated weigh below hook, s Construction features Selectable environmental filters, auto tare, user selectable service life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user ID, up to 9 operating languages

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

The NucliSens miniMAG system uses Boom technology (reference method) with magnetic silica for the ge (more)neric extraction of DNA and RNA in different specimens.

This listing is for a Consort EV261 Power SupplyAll Consort Maxi Series (EV200) power supplies have  (more)four output terminals for up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run. Programming–up to 9 different programs, each with 9 steps, can be stored in the nonvolatile memory for future recall. Timer–can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed. Automatic cross-over–each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant. Automatic recovery after mains failure–after restoration of power, the instrument will automatically continue the run for the remaining time. Data Transfer–optional data acquisition/control software for PC is available to visualise and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit's memory. Safety precautions –the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock. Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.

Samples and applications - Sample preparation for DNA and organic tissue analysis - Organic tissue d (more)ispersions TECHNICAL DATA - Rotor diameter: 3.2 mm - Stator diameter: 5 mm - Stator/rotor gap: 0,4 mm - Volume (H2O): 0,2 - 50 ml - Immersion depth: 10-50 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 4,2 m/s - Ultimate fineness, emulsions: 1 -10 µm - Ultimate fineness, suspensions: 10 -50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Magnetic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7  (more)is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. MAXIMUM TEMPERATURE PRECISION The VTF thermoregulator is ideal for multiple applications and satisfies the most demanding requirements in terms of accuracy, reliability and flexibility of use. Thanks to the innovative FUZZY LOGIC technology, it automatically adapts the thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows a better alignment with the set point temperature (with an accuracy of ± 0,5°C.) and a lower initial 'overshoot' (initial deviation with the set temperature) . DIGITAL TIMER It will be possible to select up to a maximum operating time of 24 hours and 59 minutes, after which the instrument will automatically switch off the thermoregulation. COMFORT Thanks to the unique Velp design, the installation of the VTF on the support rod will be very simple and will help the positioning of the Pt100 probe in the different containers. The two clamps allow for height and horizontal adjustment.

For sale: Refubished Agilent 1290 HPLC with high pressure pump (1200bar) including: G4212A 1290 DAD  (more)Detector G4220A 1290 Binary pump (1200 bar) G4226A Autosampler G1330B 1290 Thermostat G1316C Thermostated Column Compartment Solvent tray

96-well acrylic manifold for proteins and nucleic acids: Dot-, spot- and slot-blot array systems. Co (more)mpatible with multi channel pipettes Tension on the clamping is adjustable, permitting use of a variety of blotting and filtration media The Minifold system consists of four basic components: Sample well plate, filter support plate, vacuum plenum and metal clamping plate. 96-well spot-blot system: Standard microplate format. Sample volumes as low as 25 μl can be applied, with very high signal intensity.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW