Climatic chamber KK 1200 POL-EKO

The special transport containers of B Medical Systems are made of polyethylene, by rotational moldin (more)g and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests. - Extremely light - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates External dimensions W x D x H (mm): 588 x 288 x 437 Internal dimensions L x W x H (mm): 245 x 460 x180 Insulation: 50-60 mm Storage capacity (gross volume of bags): 8 (450ml) / 14 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 57 h at 43°C outside: up to 16.39 h Compliant with ADR, RID, IMDG, ICAO-TI, IATA-DGR, Class IIa medical device according to MDD 93/42 / EEC

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The two blades that open as the speed increases generate an axial flow in the container, from top to (more) bottom. Particularly suitable for stirring in narrow-necked containers, e.g. flasks.

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 150 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Capacity of 2 agitator trays; for containers over 180 mm only 1 tray can be used - Temperature stability ±0.2°C - Shaking frequency: 20 to max. 250 min-1 - Stirring width: 30 mm - Usable volume 150 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Amplitude of shaking 25 mm - Load capacity max. 20 kg - Timer from 1 minute to 999 - Vibrating platform width 674 mm - Vibrating platform depth 540 mm - Capacity approx. 150 L / 2 stirring trays - External structure in electrolytically galvanized steel sheet, powder coated

The Ci3000+ Weather-Ometer with its advanced digital control systems, represent monumental achieveme (more)nts in applying digital and optical technologies in easy-to-use laboratory weathering instrument. The 3000 Series is approved by many OEMs in the textiles, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The 3000 Series has been certified CE, UL, CSA, ISO and EN compliant. 4500 W water-cooled xenon arc lamp Total exposure area of 2,188 cm2 TFT full color 12″ touch screen control panel display of all test parameters Direct setting and control of Black Panel Temperature, uninsulated (BPT) or insulated (BST) Direct setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods Space for 12 custom programs, sub-cycle capability SmartDamper to reduce test variability in chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor verifies that correct light capsule is installed Chamber viewing window in door Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure VibraSonic Humidification System Calibrated xenon reference lamp Water purity indicator Standards: AATCC TM16-2004: Colorfastness to Light AATCC TM 16.3 (2014): Colorfastness to Light, Xenon-Arc AATCC TM169: Weather Resistance of Textiles: Xenon Lamp Exposure ASTM C1442: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus ASTM D2565: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications ASTM D3424: Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter ASTM D4303: Standard Test Methods for Lightfastness of Pigments Used in Artist Paints ASTM D4355: Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water ASTM D4459: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications ASTM D4798: Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) ASTM D5071: Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus ASTM D6551: Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus ASTM D6695: Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings ASTM D7869: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings ASTM D904: Standard Practice for Exposure of Adhesive Specimens to Artificial Light ASTM G151: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources ASTM G155: Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials GME 60292: Designation of Colour Fastness and Resistance to Artificial Light IEC 60068-2-5: Environmental testing – Part 2-5: Tests – Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering ISO 105-B02: Textiles – Tests for colour fastness – Part B02: Colour fastness to artificial light: Xenon arc fading lamp test ISO 105-B04: Textiles – Tests for colour fastness – Part B04: Colour fastness to weathering: Xenon arc test ISO 105-B07: Textiles – Tests for Colour Fastness – Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration ISO 105-B10: Textiles – Tests for colour fastness – Part B10: Artificial weathering – Exposure to filtered xenon-arc radiation ISO 12040: Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light ISO 16474-1: Paints and varnishes – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 16474-2: Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps ISO 18909: Photography – Processed photographic colour films and paper prints – Methods for measuring image stability ISO 18930: Imaging materials – Pictorial colour reflection prints – Methods for evaluating image stability under outdoor conditions ISO 18937: Imaging materials – Photographic reflection prints – Methods for measuring indoor light stability ISO 3917: Road vehicles – Safety glazing materials – Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering ISO 4892-1: Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 4892-2: Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc sources JASO M346: Light-exposure test method by xenon-arc lamp for automotive interior part MIL-STD 810F: Environmental engineering considerations and laboratory tests – Part 2: Laboratory test methods – 505.4: Solar radiation (Sunshine) Peugeot Citroen (PSA) D47 1431: Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures SAE J2412: Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus SAE J2527: Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus VDA 75202: Automotive interior materials – Colorfastness and ageing test against light at high temperatures: Xenon arc VW PV 1303: Non-metallic materials – Lightfastness test for interior parts VW PV 3929: Non-Metallic Materials – Weather Ageing in Dry, Hot Climate VW PV 3930: Non-Metallic Materials – Weathering in Moist, Hot Climate