MT 12 B-Medical-Systems transport container

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - USB port - Electron (more)ics with easily accessible temperature display in the door handle - No sharp edges for easy hygiene control - Gasket heater that minimizes condensation - Easy data archiving - Anti-corrosion structure guaranteed for life Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Polypropylene structure with polyurethane foam that provides strong thermal insulation - Sealed gaskets that minimize the loss of cold air - Monobloc cabinet made with the exclusive rotational molding technique The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

BAGS FOR THE TRANSPORT OF BLOOD PRODUCTS, TEST TUBES AND DRUGS MT 4 passive container manufactured b (more)y B Medical Systems. The special transport containers of B Medical Systems are made of polyethylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates Insulation: 23-27 mm Storage capacity (gross volume of bags): 4 (450 ml) / 6 (270 ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outdoors: up to 46 h at 43°C outdoors: up to 32.5 h Compliant with ADR, RID, IMDG, ICAO-TI, IATA-DGR, Class IIa medical device according to MDD 93/42 / EEC

Easily accessible features - The special transport containers of B Medical Systems are made of polye (more)thylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light. - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates External dimensions W x D x H (mm): 550 x 475 x 499 Internal dimensions L x W x H (mm): 340 x 260 x 270 Insulation: 90-105mm Storage capacity (gross volume of bags): 15 (450ml) / 25 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 96.14h at 43°C outdoors: up to 56.5h Conforme a ADR, RID, IMDG, ICAO-TI, IATA-DGR, Dispositivo medico di classe IIa secondo MDD 93/42 / CEE

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - USB portElectronics (more) with easily accessible temperature display in the door handle - No sharp edges for easy hygiene control - Gasket heater that minimizes condensationEasy data archivingAnti-corrosion structure guaranteed for life Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distributionRapid recovery of the temperature even in case of frequent openings of the door - Extended autonomy in the event of a power failureAudiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Polypropylene structure with polyurethane foam that provides strong thermal insulation - Sealed gaskets that minimize the loss of cold air - Monobloc cabinet made with the exclusive rotational molding technique The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Julabo MAGIO MS-450F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz Working T (more)emperature Range -30°C to 200°C Cooling Capacity 460W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap - Class III (FL) according to DIN 12876-1 The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-450F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HI 8427 is a portable pH/mV simulator designed specifically for calibrating pH and mV (ORP) mete (more)rs. Two calibration ranges are provided from 0 to 14 pH with temperature compensation and from -1900 to 1900 mV. A high impedance button and leakage LED are also provided to verify if the connection cable and pH meter insulation are in perfect condition. The instrument has a BNC output connector. Range pH: 0 to 14 in steps of 0, 2, 4, 7, 10, 12, 14 Range mV: -1900 to 1900 in steps of -1900, -350, 350, 1900 Accuracy pH: ±0.1 Accuracy mV: ±2 Temperature compensation: 0°C to 50°C High impedance test: 1010 Ω Power supply: 9V battery Battery life: 100 hours of continuous Dimensions (DxWxH): 180 x 80 x 30 mm Weight: 300 g

Dimensions (HxWxD): 1850 x 600 x 650 mm Internal dimensions (HxWxD): 1620 x 500 x 460 mm Capacity: 4 (more)14 L