Retsch Woven Wire Mesh Test Sieve 355 µm Sieb Stainless Steel SS 400 x 65mm 40cm

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2012 Tested at 37°C and -10°C

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Yamato DX-302C Natural Convection Oven 28L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 28L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-302C Natural Convection Oven is a cost-effective and user-friendly solution for precise temperature control needs. It features a digital PID controller with simple operation options, including Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 300°C, with a control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It can reach its maximum temperature in approximately 45 minutes. Constructed with a robust stainless steel interior and an electro-galvanized steel sheet exterior coated with melamine resin, this 28L oven is easy to maintain. It's insulated with glass wool and uses a 0.9 kW iron-chrome wire heater. The oven includes two 33 mm exhaust ports on top, a microprocessor-controlled PID temperature controller, digital setting and display methods, and a versatile timer. Safety features include self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker. The internal dimensions are 300x310x300mm, and external dimensions are 400x440x630mm. It can support a shelf plate load of 15kg and offers six shelf rest steps with a 35mm pitch. The oven weighs about 23kg and is compatible with AC115V 9.5A making the Yamato DX-302C an ideal choice for various precision heating requirements. INCLUDED: The Yamato DX-302C Natural Convection Oven 28L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Boekel Scientific 136400 Shake 'N' Bake - Rocking Hybridization Oven, 115VThe Boekel Scientific 1364 (more)00 Shake 'N'Bake - Rocking Hybridization Oven provides a gentle up and down motion andtemperature control, which is ideal for hybridization and wash procedures.Supplied with two shelves. Independent temperature and rocking control. Features Gentle rocking motion is perfect for washes and hybridization Small footprint saves bench space Three removable shelves, each capable of holding blots up to 20cm x 20cm Gasket sealed see through door PID controller for easy temperature selection and stability Adjustable rocking speed from 8 to 25 strokes per minute Supplied with two removable shelves. Please note: Total maximum shelf load is 1 kg (2.2 lb.) 2 year warranty Applications Hybridization and wash procedures for scientists that prefer to use heat sealed bags, plate or dishes/trays Conventional incubations with or without rocking motion Cell culture in bags INCLUDED: The Boekel Scientific 136400 Shake 'N' Bake - Rocking Hybridization Oven, 115V includes: - Two Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

TEAFLEX - PMA - PAST 23 B 90 B124866 430/+1880 04 02 05 CE This was removed from a university lab.  (more)It has not been tested. 3 x Cables included.

A&D Weighing MX-50 Moisture Analyzer Capacity 51 g Weight Resolution 0.001g Moisture Content Ac (more)curacy 0.10 % (Over 1 g) 0.02% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing MX-50 Moisture Analyzer is a powerful tool for precise moisture analysis, offering a blend of performance and user-friendly design for diverse laboratory needs. Equipped with four selectable heating modes—standard, quick, step, and ramp—the MX-50 allows users to tailor heating curves to their specific sample types, ensuring both accuracy and efficiency. With five measurement programs (Standard, Automatic, Quick, Timer, and Manual), this analyzer adapts to varying sample and process requirements, making it versatile for both routine and complex moisture analyses. The large VFD display provides clear visibility of all critical data, including settings, moisture changes, and process indicators, streamlining workflow and reducing user error. An ergonomically designed pan handle ensures safe handling of hot samples, and a convenient progress window lets users monitor the heating process with ease. Additionally, the unit is equipped with self-check functions to maintain reliability, including defect checks and temperature control. The MX-50 supports compliance with GLP, GMP, GCP, and ISO standards, making it ideal for regulated environments. Its RS-232C interface and WinCT-Moisture software allow for seamless data transfer, and the memory function stores up to 100 sets of measurement data, enhancing traceability and record-keeping. Supported by a robust 5-year warranty, the A&D Weighing MX-50 ensures long-term reliability and precision, solidifying its place as a top choice for moisture analysis in the lab. INCLUDED: The A&D Weighing MX-50 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - RS-232C Cable - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Automatic checkweigher DWT/RC/HYF series is dedicated to work on technological lines of food industr (more)y, where high humidity and frequent high pressure cleaning are the major issues. The construction has been designed to enable fast and easy cleaning. Special emphasis has been put on elimination of gaps, spaces and flat surfaces susceptible to condensates and waterstains. The structure of the conveyor belt allows washing it inside and outside without dissembling. The electronics has been placed high above the weighing platform for minimizing the possibility of inundation of the control panel. The checkweigher DWT/RC/HYF series is created in accordance with vertical space division. “Clean zone” ranges from the floor to the level of the conveyor belt (the area where food and production waste accumulates). “Technological zone” is placed above the production line. The control mechanism is based on a terminal HY series, facilitating easy communication between the operator and the machine and providing additional features. Standard functions: - Database of operators and products - RS 232/485 and Ethernet interfaces - I/O control - Current weighing statistics - Automatic printouts - Reports - Cooperation with computer software Additional functions: - Faulty goods discriminator - Barcode scanner - The checkweigher can be equipped with standard ink printers and labelling printers allowing to print the tags of the weighed products - Sounder and/or Warning tower lights - Cooperation with feeders, mounted to the front side, in a feedback system.

HX7 scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68)  (more)mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Labconco 701221010 FreeZone 12L -50C Complete Freeze Dryer System with Stoppering Tray Dryer The Lab (more)conco 701221010 FreeZone 12L -50C Complete Freeze Dryer System with Stoppering Tray Dryer includes the Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector, Labconco 794801010 Stoppering Tray Dryer, and an Edwards RV12 Vacuum Pump. The Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58F), suitable for aqueous samples. The Labconco 794801010 Stoppering Tray Dryer lyophilizes moderate to large loads of vials or serum bottles and stopper them under vacuum. They offer temperature control from -40 to +40° C. Options include a 6-port manifold, isolation valve and sample trays. A pneumatic mechanism stoppers containers under vacuum on three large adjustable processing shelves, 16.5” x 12” each. An HCFC/CFC-free refrigeration system and electric heater cool and heat fluid medium that is circulated through the shelves to maintain shelf temperatures within ±1° C. The Edwards RV12 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 701221010 FreeZone 12L -50C Complete Freeze Dryer System with Stoppering Tray Dryer includes: - Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector - Labconco 794801010 Stoppering Tray Dryer - Edwards RV12 Vacuum Pump - All Vacuum Tubing - Edwards EMF 20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark BenchRocker 2D Rocker Speed Variable, 2 to 30 RPM Tilt Angle Variable, 0° to 30° Platfor (more)m 14 x 12 in Features - 2-30 RPM speed for precise mixing - Adjustable tilt 0°-30° for efficiency - 14x12 in platform for various vessels - 8 lbs capacity for diverse applications - Compact design: 14x12x6.5 in, 50W - Included: Flat mat, power cord, guide - 2-year manufacturer's warranty Your browser does not support the video tag. The BenchRocker 2D is designed to provide the precise speeds and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results. INCLUDED: The Benchmark BenchRocker 2D Rocker includes: - 14 x 12 inch Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty