Nabertherm LV 9/11/B170 Muffelofen Ofen Muffle Furnance Oven 1100°C 9L

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2012 Tested at 37°C and -10°C

Mettler Toledo KF-oven sample changer Stromboli. In combination with the Karl Fischer compact titrat (more)ors C30 and V30 the Stromboli sample changer enables up to 14 samples to be titrated in unattended operation. The samples are automatically transferred into a temperature controlled oven from where the evaporated water is transferred to the titration cell via an applied gas flow.

The Model 400 Hybridization oven is a high precision rotating convection oven for Northern blot and  (more)Southern blot hybridizations and other applications.

Yamato DX-402C Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 72L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-402C Natural Convection Oven 74L, 115V is an economical, high-capacity oven designed for precision heating, featuring a spacious 74L interior. Equipped with a digital PID controller, it offers easy operation with modes like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven efficiently maintains temperatures from room temperature +5°C to 300°C with an excellent control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It reaches its maximum temperature in about 60 minutes. Constructed for durability, it has a stainless-steel interior and an electro-galvanized steel sheet exterior with a melamine resin baking finish. Insulation is provided by glass wool, and heating is achieved with a 1.36 kW iron-chrome wire heater. It includes two exhaust ports, each 33 mm in diameter, located on top, and features microprocessor controlled PID temperature control with digital setting and display, alongside a comprehensive timer. Safety is prioritized with self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 450x410x400mm, and the external dimensions are 550x540x730mm. The oven supports a shelf plate load of 15kg, offering nine shelf rest steps with a 35mm pitch. Weighing approximately 38kg, it is compatible with AC115V 14A and is an ideal choice for users needing a larger, reliable, and easy-to-use convection oven for various applications. INCLUDED: The Yamato DX-402C Natural Convection Oven 74L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF55 Forced Circulation Oven 53L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 53 L (1.87 cu.ft.) Features - Setting temperature range from +20°C to +300°C with a working range starting 10°C above ambient - 53 L (1.87 cu.ft.) internal capacity for versatile applications - Precise temperature control with 0.1°C resolution up to 99.9°C and 0.5°C from 100°C - ControlCOCKPIT with adaptive multifunctional digital PID-microprocessor controller and high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for precise airflow management - AtmoCONTROL software for data logging and program management via Ethernet interface or USB port - Fully insulated stainless steel door with 2-point locking and inner glass door for improved safety and visibility - Easy-to-clean stainless steel interior with large-area heating integrated on four sides The Memmert UF55 Forced Circulation Oven 53L, 115V is designed for precise and efficient temperature control, making it ideal for a wide range of laboratory applications. Equipped with the advanced ControlCOCKPIT digital PID-microprocessor controller and a high-definition TFT-color display, this oven provides a user-friendly interface for adjusting critical parameters such as temperature (in Celsius or Fahrenheit), fan speed, air flap position, and program time. The oven's working temperature range extends from a minimum of 10°C above ambient up to +300°C, with a fine resolution of 0.1°C up to 99.9°C, ensuring precise thermal management. Forced air circulation by a quiet, adjustable air turbine enhances airflow within the chamber, delivering uniform heat distribution throughout the spacious 53L (1.87 cu.ft.) interior capacity. The stainless steel interior, reinforced by deep-drawn ribbing and integrated large-area heating on four sides, ensures durability and easy cleaning. The Memmert UF55 also incorporates multiple safety features, including an adjustable electronic overtemperature monitor and mechanical temperature limiter, meeting DIN 12880 standards. The SetpointWAIT function ensures that the process time only starts once the set temperature is reached, guaranteeing accurate thermal conditions. For fresh air regulation, the oven features electronically adjustable air flap control in 10% increments, combined with a vent connection for efficient airflow management. With a fully insulated stainless steel door, two-point locking mechanism, and inner glass door for safe observation, the unit provides optimal protection and convenience. The oven comes with AtmoCONTROL software on a USB stick, allowing easy programming and data management via Ethernet or USB, making it a versatile addition to any laboratory. INCLUDED: TheMemmert UF55 Forced Circulation Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector cha (more)nnel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method.

Temperature range: -5°C to -35°C Net Content: 432 L (gros content: 600 liter) Dimensions (WxDxH): 83 (more)7 x 756 x 2273 mm Weight: 152 kg Explosion proof Possible options can be ordered at extra cost (see image)

Memmert IF750 Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 749 L (26.5 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF750 Forced Circulation Incubator 749L, 115V offers an expansive 749 L (26.5 cu.ft.) volume, making it an excellent choice for large-scale laboratory operations. Its setting temperature range spans from +20°C to +80°C, with a working range starting at Min. 10°C above ambient. The incubator features a robust ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display, allowing for precise control over key parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time. Its easy-to-clean stainless steel interior is reinforced with deep drawn ribbing and integrated heating on four sides, ensuring durability and optimal heat distribution. Designed for safety and efficiency, the IF750 includes an adjustable overtemperature monitor and mechanical temperature limiter TB, in compliance with DIN 12880 standards. The forced air circulation system, driven by a quiet air turbine, is adjustable in 10% increments, ensuring even airflow and precise temperature control. With space for up to 14 shelves and a maximum chamber load of 661 lbs, this incubator is suitable for high-capacity workloads. Additional features like AtmoCONTROL software, a fully insulated stainless steel door with inner glass, and autodiagnostic systems make the IF750 a powerful tool for any lab environment. INCLUDED: The Memmert IF750 Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Ohaus HB6AL Analog Dry Block Heater, 6 Block Temperature Range Low: Ambient +5°C to 100°C / High: 75 (more)°C to 150°C Control Analog Uniformity Within the Block ± 0.1°C at 37°C Features - Supports six interchangeable modular blocks with over 40 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Features dual temperature adjustment knobs with dial markings for precise control - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB6AL Analog Dry Block Heater offers exceptional temperature stability, making it perfect for various applications that demand consistent heating. This heater accommodates six interchangeable modular blocks, providing over 40 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB6AL features a robust painted steel housing and is equipped with dual analog temperature adjustment knobs, making it an economical yet reliable choice for any laboratory setting.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB6AL Analog Dry Block Heater, 6 Block includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 700201000 FreeZone 2.5L -50 C Complete Freeze Dryer System Features - Patented moisture sen (more)sorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 2.5L -50 C Complete Freeze Dryer System includes the Labconco 700201000 2.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV3 Vacuum Pump. Features of the Labconco 2.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector: Upright stainless steel collector coil holds 2.5Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuumpump from costly damage: A vacuum break valve bleeds air into the system whenpower to the freeze dryer or vacuum pump is shut off for more than 5 minutes. Amoisture sensor prevents refrigeration or vacuum start-up when moisture isdetected in the drain line. Vacuum pump is automatically shut down when a leakis present in initial pull down or during run. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. The Edwards RV3 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 2.5L -50 C Complete Freeze Dryer System includes: - Labconco 700201000 FreeZone 2.5L -50°C Benchtop Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV3 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Jenesco Pro-24S Ozone GeneratorThe Pro-24S ozone generator is intended for use incommercial applicat (more)ions, or wherever a high output of ozone is necessary toreduce bacteria, odors, mildew, & mold. It is very powerful, with ozoneoutput potential of up to 24,000 mgph, using the ozone adjustment knob. Ozonegasses are able to penetrate the infected area, attaching itself to themolecules, chemically changing the structure and destroying odors at thesource. The Pro-24 S ozone generator can cover up to 18,000 sq ft for odors,and 6,000 sq ft for mold. It features timed sequences ranging from 15 minutesto 12 hours, but also offers continuous operation simply by using the ‘hold’position on the timer knob. The hour meter registers usage up to 99,999 hours. This 10 lb 20” x 18” x 5” high generator agreat choice for a wide variety of applications. Made in the USA.INCLUDED: The Jenesco Pro-24S Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty