Boekel Scientific 107801 Oven, Large, 115V

This Techne Hybridiser HB-1D Hybridisation Oven was removed from a university lab where it was surpl (more)us to requirements. The item powers on and is in reasonably good cosmetic condition. The temperature was tested with a digital thermometer (not included).

Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 27L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing the Yamato ADP Series - a range of versatile laboratory ovens designed to elevate your scientific endeavors. Whether you choose the ADP200C, ADP210C, ADP300C, or ADP310C, you're guaranteed exceptional performance and a host of valuable features. With easy parameter input and settings, our digital PID controller ensures precise temperature control, supporting fixed temperature, quick auto-stop, auto-start, and program operations. Safety is paramount, with self-diagnostic and overheating prevention functions, a silicon rubber door seal to maintain an airtight chamber, and independent overheating prevention devices for each circuit. Customize your oven with N₂ gas inlet and communication ports, and fine-tune settings with the calibration offset function. Maintenance is a breeze, and our safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, overheating safeguards, and measurement temperature error detection. Make the right choice for your lab with the Yamato ADP Series.INCLUDED: The Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V includes: - Shelf Plate (3 pcs.) - Power Cord - One Year Manufacturer's Warranty

Not for consumption.

BINDER CB210 Co2 Incubator / Drying Oven Nominal temperature: 187 ° C Internal volume: 210 l (CB 210 (more)) Temperature range: 7 to 60 ° C CO2 range: 0 to 20% CO2 volume Adjustment accuracy: 0.1% CO2 volume CO2 measurement: IR Nominal voltage: 230 V, single-phase unit Nominal current: 6.6 Amp Power frequency: 50/60 Hz External dimensions (W x H x D): 740 x 1069 x 715 mm Number of doors: 1 Number of internal glass doors: 1 Internal dimensions (W x H x D): 560 x 750 x 500 mm Number of perforated shelves made of stainless steel 1.4301 / V2A: 3 Shelf size (external) (W x D): 556 x 444 mm Empty weight: 121 kg Tested at 37°C CO2 at 5% (6.2% measured) Year of manufacture: 2003 Please note, slight modification to the door for padlock closure. See photos

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

SG Ultra Clear TUF UV Ultrapure Water System With Permeate Tank This system was removed from a unive (more)rsity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was not in working order but were unable to confirm the fault. It is sold for spares/repairs Included with the system is the following: - Permeate Tank - Cartridge Polisher - P/N- TR-2051 - DI Cartridge - P/N- TR-2050 - Carbon Pre-Filter - P/N- TR-2057 - Carbon Pre-Filter (expired) - P/N- TR-2057 - DI Cartridge (expired) - P/N- TR-2050 - User Manual

IKA R 3001.1 Moebius stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel F (more)eatures - Generates axial flow, efficiently drawing material from above for effective mixing - Specifically designed for circulating and handling low to medium viscous liquids - Suitable for operation at medium speeds for optimal control - Constructed from AISI 316L / 1.4571 stainless steel for high durability and corrosion resistance - Operates within a permissible ambient temperature range of 5 - 40 °C, versatile for various lab conditions The axial flow stirrer is expertly designed to draw materials from above, optimizing the mixing process for low to medium viscous liquids. With a 100 mm stirrer diameter and a 575 mm shaft, it's tailored for comprehensive circulation and handling at medium speeds. Crafted from durable AISI 316L / 1.4571 stainless steel, this stirrer stands up to rigorous use while resisting corrosion. Weighing 0.6536 kg and capable of operating in ambient temperatures of 5 - 40 °C, it combines functionality with reliability for effective lab work.INCLUDED: The IKA R 3001.1 Moebius stirrer includes: - IKA R 3001.1 Moebius stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7&quot; colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.