Thermo Scientific Revco UXF Ultra Low Temperature Freezer UXF50086V63 Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

New Brunswick U6785 Ultra Low-Temperature Freezer Lab This item was removed from a university where  (more)it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition and is missing one of its feet. Features: 1 x Shelf: 39 x 28 cm

Thermo Scientific Revco Elite Plus Ultra Low Temperature Freezer ULT2586-6-V48 This was removed from (more) a university lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Capacity 692 LitresInternal dimensions W 61cm x L 87cm x H 128cm

Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control The SIEVA-3 Filtration Cen (more)trifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber Temperature Setpoint Ra (more)nge 4°C to 70°C Humidity Setpoint Range 15 to 95% RH Capacity 23 cu. ft. (651.3L) Features - Designed for rigorous scientific and laboratory research requirements - Self-closing, right-hinged solid door and three 304 stainless steel sliding tray shelves - PID controller with graphic display, programmable ramp and soak functions, and process phase graphic animations - USB data port, RS-485 communication (MODBUS-RTU), real-time clock, battery backup, and event logs - Foamed-in-place polyurethane foam insulation and white powder-coated steel exterior - Top-mounted variable speed compressor and hydrocarbon natural refrigerant - Multi-element proportional electric heating and shielded interior LED lighting - Heavy-duty door handle, magnetic door gasket, keyed door lock, and probe access port The Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber is designed to meet the rigorous demands of scientific and laboratory research. This 23 cu. ft. capacity chamber features advanced engineering in cabinet construction, refrigeration, temperature control, and monitoring to ensure energy-efficient, safe, and reliable performance. It includes a self-closing, right-hinged solid door and three 304 stainless steel sliding tray shelves. The PID controller with a graphic display offers programmable ramp and soak functions, process phase graphic animations, a USB data port, RS-485 communication (MODBUS-RTU), a real-time clock, battery backup, and event logs. The chamber provides precise temperature control from 4°C to 70°C with ± 0.1°C accuracy, ± 0.5°C stability, and ± 1°C uniformity. Additional features include foamed-in-place polyurethane foam insulation, a white powder-coated steel exterior, a 304 stainless steel interior, plenum air distribution, a top-mounted variable speed compressor, hydrocarbon natural refrigerant, multi-element proportional electric heating, shielded interior LED lighting, a heavy-duty door handle, magnetic door gasket, keyed door lock, and a probe access port. This chamber is ideal for a wide range of applications in life science, pharmacy, biological, medical, clinical, and industrial fields. INCLUDED: The Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber includes: - Key for Door Lock - 3 x Sliding Shelves - Power Cord - Operator's Manual - 18 Month Manufacturer's Warranty

Accuris MS1000 SmartSeal Semi-Automated Microplate Sealer Sealing Time 0.5 Sec. to 10 Sec. (1 Sec. I (more)ncrements) Temperature Range 80°C to 200°C Heat-Up Time 6 Minutes to Reach 200°C Features - Fast, reproducible sealing of well plates - Adjustable time, temperature, and pressure for optimized sealing - User friendly controls, load plate and press "Run" to seal - Accepts a wide range of plate types and heights, with a maximum height of 48mm - Variety of thermal films can be accommodated, including thin foil films - Time saving solution for labs and production facilities requiring high quality and consistent plate sealing - 2 Year Manufacturer's Warranty

HOW DOES 'QUARANTINE' WORK? 1 - A fire breaks out inside the safety cabinet. 2 - The automatic syste (more)m overturns the shelves and slides the batteries stored in the cabinet into a tub. 3 - Inside the water tank the batteries are placed in a sort of quarantine which will not only definitively extinguish the fire but also exclude the possibility of self-combustion. ACCESSORIES Electrical sockets are not standard. Contact us for your custom configuration.

Beckman Coulter Biomek FXP Laboratory Automation Workstation This was removed from a university lab (more) where it was surplus to requirements. The system has been tested and is in good working order. The tiploader was tested with a compressor (not included). The software is installed on the PC and communicates with the system well. Included are; PC/Accessories:-Dell Optiplex 380Iiyama Prolite B2282HSDell PC & MouseStarview 4 Port USB 2.0 KVM SwitchLots of cables (USB, Ethernet, RS232) Other Parts:-Beckman Coulter FX Device Controller Model - 717635 Inheco TEC Control 96SN - 958Powers on Cole Parmer MasterFlex Console DriveModel - 7520-67SN - G07004011Powers on Spare Beckman Coulter AccuFrameSPRIplate 96 - Ring (AGN - 000322)Removable Gripper Rod (REF-394069)4 x Spare plates2 x Nalgene 2Gal BottlesBox of spare plate stands Consumables included:-1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 1001 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 154 x Packs - Unknown Packs - Qty 201 x Box - Beckman SPAN 8 Tube Tool Kit

Agilent 1200 G1323B Handheld Control Module. Install any desired configuration of Agilent 1200 Serie (more)s modules. The control module software will reflect which modules are present in the LC system and adjust the screens accordingly. Enter parameter settings for every module, perform reset and on/off functions as well as calibration and configuration settings in a self-explanatory and intuitive way.Define automated analyses including methods, timetables, injector programs, method sequences and automated calibration settings using the control module.Protect your method from any inadvertent keyboard changes by setting method protection. Use PC cards to store and transfer methods and sequences between Agilent 1200 systems. Monitor all operations and error events using the self-updating logbooks. Use the context-sensitive on-line information system to get further information on all topics. Use the context-sensitive menu function to have the quickest access on related functions. Display data graphically using the Plot screen where as many as three different signal scan be monitored at the same time. Print in formation to a PCL3 compatible printer connected to the serial RS232 port of an Agilent 1200 module.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).