New Brunswick Scientific U410 U410-86 ULT Ultra-Low Temperature Freezer Lab

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and the heating is in good working order. Inside tank dimensions - L59 W31 H37cm It is in good cosmetic condition with some marks from use.

ISI ABT Scanning Electron Microscope (SEM) ABT-55 This was removed from a university lab where it wa (more)s surplus to requirements. We are told it was in working order prior to being put into storage some time ago Included are; ISA ABT 55 Main Control UnitWith 25cm CRT monitorControl desk with all control switches and buttons Microscope ABT 55 UnitSerial No. K244149Year 1989Controls for vacuum system, not included ETP Sempra Robison Detector Head and Control ModuleModel PSM-11-4Serial No. 524 The main units were not powered up due to no plug on the main power supply unit, it was previously hard wired. The Robinson Detector unit powered on and displayed readiness lights. Accessories:5 x used spare copper columns4 x small aluminium fitting platesOperators Manual4 x 15 amp fusesFilament cartridge

A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg Capac (more)ity 42 g / 210 g Readability 0.01 mg / 0.1 mg Repeatability 0.02 mg / 0.1 mg Features - Precision semi-micro balance with dual-range readability of 0.01 mg / 0.1 mg for high-accuracy applications requiring consistent, reliable results across a wide dual capacity range - Splash/Dust Proof Membrane Keypad - Easy to clean antistatic breeze break, ABS housing, and SS pan, spill ring, dust plate & base floor - Stable die cast aluminum base with built-in internal weight that performs automatic self-calibration - Easy to see large .7in (17.8mm) LCD display with simple 6 button keypad interface - Super visible front mounted spirit level bubble helps reduce leveling time and increase accuracy - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Space saving footprint and collapsible doors maximize valuable bench space and reduce breeze break mishaps - Handy step card and door control lever opens either side of the weighing chamber for quick and efficient access - Easy-click door lock joints enable user to quickly configure doors to fit weighing work flows The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg, is crafted for precision and ease of use, equipped with advanced features tailored to meet the demands of diverse laboratory environments. With dual capacities of 42 g and 210 g, and an impressive readability of 0.01 mg in the lower range and 0.1 mg in the higher, it ensures exceptional precision for critical measurements. Its splash and dust-proof membrane keypad, along with a robust die-cast aluminum base, provides durability and stability. The built-in internal calibration weight enables automatic self-calibration, ensuring consistent accuracy. A large 0.7-inch LCD display and straightforward six-button keypad interface make the balance easy to read and operate, while the front-mounted spirit level bubble helps users quickly achieve accurate leveling. With an anti-static breeze break and ABS housing, along with stainless steel components such as the pan, spill ring, and base floor, the Gemini GR-202 is designed for easy maintenance and long-lasting performance. The compact footprint and collapsible doors save valuable bench space and reduce accidental mishaps, while easy-click door lock joints allow users to adjust the chamber for convenient access and workflow efficiency. The Full Digital Calibration function supports both internal and external calibration, allowing quick, reliable calibration on site for peak performance. For data management, this model includes a memory function to store up to 200 weighing data records and complies with GLP/GMP/GCP/ISO output standards. Connectivity options include bi-directional RS-232C, and with the underhook for below-weighing applications, the Gemini GR-202 adapts to various tasks with precision. Supported by a 5-year warranty, this balance ensures reliable performance for your lab’s most critical measurements. INCLUDED: The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg includes: - Weighing Pan - Fine Range Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Ohaus EX225D/AD Explorer Semi-Micro Analytical Balance For lab work and research that demand precisi (more)on up to five decimal places, the margin for error is nonexistent. The Explorer series of semi-micro balances is engineered with the latest technology to ensure exactness in your specific weighing results. Labs seeking a combination of precision and innovative technology will find both in our Explorer semi-micro balances.Designed for peak performance, these balances offer readability up to 0.01mg and capacities reaching 220g. The integrated AutoCal™ Internal Calibration system guarantees accuracy in applications that need high precision.Featuring a vibrant touchscreen display, the user experience is significantly enhanced. The balance also includes touchless sensors, automatic draftshield doors (included in select models), and an ionizer to safeguard the credibility of your results.To further enrich your weighing process, the balance is outfitted with SmarText™ 2.0 software, icon-based navigation, a 99-item library, 6 user profiles, and an indication for below-minimum sample weight. All these features come together to deliver an efficient, yet straightforward weighing experience.INCLUDED: The Ohaus EX225D/AD Explorer Semi-Micro Analytical Balance includes: - Power Cord - 2 Year Manufacturer's Warranty

Accuris MS1000 SmartSeal Semi-Automated Microplate Sealer Sealing Time 0.5 Sec. to 10 Sec. (1 Sec. I (more)ncrements) Temperature Range 80°C to 200°C Heat-Up Time 6 Minutes to Reach 200°C Features - Fast, reproducible sealing of well plates - Adjustable time, temperature, and pressure for optimized sealing - User friendly controls, load plate and press "Run" to seal - Accepts a wide range of plate types and heights, with a maximum height of 48mm - Variety of thermal films can be accommodated, including thin foil films - Time saving solution for labs and production facilities requiring high quality and consistent plate sealing - 2 Year Manufacturer's Warranty

Zebra 110 XiIII Plus Thermal Label Printer Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and working order, it is supplied with a roll of Labels installed.ss

Motic Moticam 4000X Microscope Camera Capture Resolution 8MP (3864x2228 Pixels) Pixel Size 1.45 x 1. (more)45μm Maximum Frames per Second (FPS) 30 FPS Features - Transforms conventional microscope into a digital microscope and Wi-Fi station - Allows image sharing with up to 6 devices simultaneously - Compatible with tablets and smartphones via MotiConnect app - On-board software for standalone operation - HDMI port for screen connection - USB port for mouse connection - USB connectivity for computer use with Motic Images Plus software - Outputs fast live images at 4K resolution (3840 x 2160 px) The Moticam 4000X, designed for efficiency and to output fast live images at 4K (3840 x 2160 px). Connect it through the HDMI port to a screen and display your live image. With the use of the on-board software and a USB mouse, you can make live measurements, notes, image adjustments and more, directly on the HDMI screen, without the need for a computer. Thanks to its integrated SD card slot and USB ports, saving images won't require a computer, making it easy to save and organize your images and videos. You can also connect your camera through USB to a Windows, or Mac computer, and even display your samples simultaneously. INCLUDED: The Motic Moticam 4000X Microscope Camera includes: - 12V Power Adapter - CS Ring, Motic 4-dot Calibration Slide - Dust Cap - 12mm Lens - 30mm and 38mm Eyepiece Adapters - Macro Tube - Macro Calibration Card - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

IKA MultiDrive control BT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - TC 1 protective housing included for safe operation with dry samples - 5 spare seals included to extend the service life of blending tubes - USB interface for simplified actuation and documentation - Interval operation feature for efficient coarse crushing and thorough blending - Integrated cooling system in the milling cup for indirect heat dissipation - Built-in weighing function, allowing pre-crushing weighing in the same mixing cup - Batch processing capability with cutting, impact, blending, and dispersing operations - Brushless DC motor for reliable performance - Bluetooth interface for wireless communication Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,and a 1000 Watt output.Interval operation is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation. Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control BT Package includes: - 5 Spare Seals - KA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive BT 250.5 Blending tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: 2°C to 15°C Dimensions (HxWxD): 2115 x 700 x 830 mm Internal dimensions (HxWxD):  (more)1570 x 530 x 650 mm