IKA RV 8 Rotary Evaporator w/ Coated Dry Ice Condenser

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V Sp (more)eed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BO302-A Oil Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BO302-A Oil Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex 5L Bath for SC100-Pro Rotary Evaporator The Scilogex 5L Bath is for use with the SC100-Pro  (more)Rotary Evaporator. INCLUDED: The Scilogex 5L Bath for SC100-Pro Rotary Evaporator includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RV 8 V-C Rotary Evaporator Type of Cooling Vertical Speed Range 5 to 300 rpm Heating Temperatur (more)e Range Room Temp. to 180 °C Features - New: 4 l heating bath - integrated safety lift-out function in case of power failure - package includes Woulff bottle - water/oil heating bath with carrying handles - locking button for fixing heating bath temperature - clearly legible, glass-covered, black-and-white displaypanel - locking mechanism: red indicator shows unlocked position ofthe vapor tube - manual lift for precise positioning of the glassware - adjustable immersion angle - single-handed manual lift handling, suitable for left andright-handed operators - speed range: 5 - 300 min-1 - low device voltage (24V) ensures user safety - flask clamping mechanism with integrated push-off functionfor easy exchange of evaporation flasks - high-efficiency condenser with 1500 cm² cooling surface -low space requirements - compatible with the entire range of IKA RV 10 glassware The RV 8 Rotary Evaporator is the manual basic model in thefamily of IKA Rotation Evaporators. It finds a multitude of uses in thechemical, pharmaceutical, and biotechnology industries, in research anddevelopment, in manufacturing and quality assurance, in laboratories, and inplant construction. Thanks to specially designed glass guides, the verticalcoated condenser makes extremely efficient use of the 1500 cm² cooling surface.Digital displays for speed and heating bath temperature enable optimum controlof all distillation processes.

IKA RV 3 Flex Rotary EvaporatorFeatures - Locking mechanism: red indicator shows unlocked position o (more)f vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The new RV 3 Rotary Evaporator is the ideal entry-level model of the IKA rotary evaporator portfolio. It finds a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing and quality assurance, in laboratories, and in plant construction. INCLUDED The IKA RV 3 Flex Rotary Evaporator includes: - RV 3 ECO - HB eco S099 Heating Bath - RV 05.10 Balljoint clamp - RV 10.89 Clamp NS 24 - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 3 Flex Rotary Evaporator SpecificationsMotor principle DCSpeed range 20 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke150 mmHeating temperature rangeroom temp. - 99 °CDimensions (W x H x D)440 x 530 x 330 mmWeight12 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationIKA RV 10 Auto Pro FlexIKA RV 10 Digital FlexIKA RV 3 FlexIKA RV 8 FlexType of CoolingWithout CondenserVerticalN/AVerticalCooling Surface1500 cm²0 cm²N/A1500 cm²Speed Range5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorManualManualStroke140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight18.6 kg18.5 kg12 kg22.366 kgRS 232 InterfaceYesYesN/AN/AUSB InterfaceYesYesN/AN/AVoltage100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }Request a Formal Quote

IKA RV 10 Auto V-C Rotary Evaporator Features - 4L heating bath optimized for rapid achievement of w (more)orking temperature, with a temperature safety circuit and boil-dry protection - Integrated vacuum controller and timer function - Bright, high-contrast, TFT, color-graphic control panel with simple menu navigation and programming for up to ten individual procedures - Automatic cooling water management, heating bath management, and ventilation - Right or left flask rotation with push-off mechanism for tightly-fitting flasks - Digital interfaces: USB port and RS-232 interface for remote control Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Precise setting of distillation method per solvent with direct volume and efficiency control Integrated solvent library with 40 preset solvents and the ability to expand to incorporate new processes The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative control concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. INCLUDED The IKA RV 10 Auto V-C Rotary Evaporator includes: - RV10 control - RV 10 auto pro FLEX - HB digital S099 Heating Bath - VACSTAR digital Vacuum Pump - RV 10.910 Glassware vertical coated - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - Vacuum hose (2 x 0.55 m) - Water discharge hose (1 x 1 m) - Water discharge hose (1 x 1 m) - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Auto V-C Rotary Evaporator Specifications Type of coolingVertical condenser coatedCooling surface1500 cm2Speed range5 - 300 rpmReversible direction of rotationyesSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output 1350 WSet temperature resolution1 ±KFilling volume max. 4 lVacuum controller integrated yesTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight31.56 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesAnalog outputyesVoltage100 - 240 VFrequency50/60 HzPower input100 WPower input standby3.3 WComparison of ModelsSpecificationRV 10 Auto Pro V-CRV 10 Auto V-CRV 10 Digital V-CRV 3 V-CRV 8 V-CType of CoolingVertical CondenserVertical Condenser CoatedVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CVacuum Controller IntegratedYesYesN/AN/AN/ATimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.65 kg31.56 kg32.67 kg22.31 kg26.07 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. Graph of pump characteristics in Alpha Lauda models. Graph of heating curves of Aplha Lauda models. TECHNICAL VISUALIZATION a - Control head with clamp b - Bath vessel c - Four mounting feet 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp

HR070-CMT 0.70X High Resolution C-Mount Adapter with ZN clamp ZEISS Diganostic Instruments For Micro (more)scope The ZN Clamp is compatible with the following Zeiss microscope models: Axiolab Axioplan-2 Axiophot-2 Axiotech Axioskop-2 Axiostar Axioskop-40 with Zeiss Standard trinocular tube Axiovert models 100, 135, 135M, 200 IM series when used with Zeiss Standard trinocular tube (45 29 02)

Labconco CentriVap Mobile SystemCentriVapMobile Systems combine the separate vacuum concentrator and (more) cold trapcomponents into one space-saving console and include casters for portabilityfrom laboratory to laboratory. A 12-13 mm Rotor and Solvent Trap are alsoincluded. The interior can accommodate a vacuum pump — the only additionalcomponent necessary to begin processing. INCLUDED: The Labconco 7812010 CentriVap Mobile System, 115V, 60Hz includes: - Rotor 12-13 mm - Coupling Insert - Cartridge, Solvent Trap - Clamp - Power Cable - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo PURA 14 Water Bath, 115V/60Hz (NRTL Certified) Working Temperature Range 18°C - 99°C Heating  (more)Capacity 1300W Volume 14L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 14 Water Bath, 115V/60Hz (NRTL Certified) includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Dimensions outside DxHxW 34,9×22,2×40 cm. Dimensions interior DxHxW 30,5×12,7×25,4 cm. Dual set func (more)tions give more flexibility: to operate the Crosslinker, you preset the energy required in microjoules (µJ), or the total time in minutes from 0.1 to 999.9.