Covaris S220x (High Power) Focused Ultrasonicator with CryoCube Chiller Sonicator

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

IKA RC 2 Lite Recirculating Chiller Working Temp. -10°C to Room Temp. Pump Pressure Max. 0.35 bar Fl (more)ow Rate Max. 18 L/min Features - Perfect for cooling rotary evaporators, reflux condensers, and heat-exchange devices - Environmentally friendly design with natural refrigerant R290 - Illuminated sight glass for easy observation of filling levels - Large working volume of 2.5 L for extended applications without refilling - Easily accessible and cleanable stainless steel mesh filter for consistent cooling capacity - Simultaneous operation of multiple small applications supported by a pressure-/suction pump - Temperature stability of ±0.5 K with PID control for precision - Compact dimensions (8.86 x 15.1 x 16.9 in.) and low noise level of 51 dB(A) - Features RS 232 and USB-B interfaces for versatile connectivity - Electrical requirements: 115 V, 50/60 Hz, 250 W The RC 2 lite is the perfect peripheral device for the cooling of rotary evaporators, reflux condensers or as a cooling source for devices that dissipate heat with the help of a heat exchanger (e. g. double-walled grinding containers, cooled incubators, laboratory reactors, cooling coils).The easily accessible and easy-to-clean mesh filter (stainless steel) ensure a consistently high cooling capacity over years. Thanks to the low filling volume of just one liter, the RC 2 lite is able to reach low temperatures particularly fast. The large working volume of 2.5 liters enables a high number of external applications without refill of liquids. The filling level in the reservoir can be clearly observed through the large, illuminated sight glass. The powerful pressure and suction pump enables the simultanous operation of several small applications as well as external applications in open bath vessels in combination with a level controller. Thanks to the natural refrigerant R290, the RC 2 lite is remarkably environmentally friendly and well prepared for the future.INCLUDED: The IKA RC 2 Lite Recirculating Chiller includes: - 2 x Hose olives DN 8 - USB Cable - Hexagon Socket Offset by Screw Key - Warranty Card - Power Cord - Operator's Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

The compact FL circulators are suitable for a wide range of cooling tasks and can be placed under th (more)e laboratory bench in a space-saving way. Operating temperature range: -20°C to 40°C Temperature range: -20 to 40 °C Temperature stability: ±0.5°C Temperature setting resolution: 0.1°C Temperature display resolution: 0.1°C Permissible ambient temperature: 5°C to 40°C Maximum return temperature: 80°C Cooling capacity (medium: Ethanol): 20°C: 1.2 kW 10°C: 1 kW 0°C: 0.9 kW -10°C: 0.6 kW -20°C: 0.3 kW Filling volume: 570 g Coolant: R449A Pump capacity flow rate: 23 l/min Pump capacity discharge pressure: 1 bar Dimensions (WxDxH): 500 x 760 x 640 mm Filling volume: 12 to 17 l Weight: 78 kg

This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but was not tested further at our facility. It is in good cosmetic condition, with some marks from use. Some of the components have been removed, it is sold for spares/repairs

Thermo Scientific Versacool Chiller This item was removed from a university lab where it was surplus (more) to requirements. It is in good cosmetic condition and full working order. Does not include any additional cable or tubing.

Infors HT Minifors Fermentor Bioreactor This was removed from a university lab where it was surplus (more) to requirements. The unit powers up but we were advised by the lab that it is missing parts. It is sold for spares/repairs.

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

Four load cell ramp platforms

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Ohaus EX223 Explorer Toploading BalanceThe OHAUSEX223 Explorer Precision Balance with 220 gram weigh (more)t capacity, has newlyoptimized linearity and repeatability specifications and enhanced vibrationfiltering for better balance stability. All Explorer models also come standardwith AutoCal automatic internal calibration. These combined enhancementsimprove accuracy, efficiency, and throughput.A large colortouch-screen display, icon-driven application software that features 14 uniqueapplication modes, and an adjustable angle display make the OHAUS Explorerseries the easiest to use, most advanced balance in its class today.The base andterminal of the Explorer EX223 separate for maximum flexibility in any workarea. It also has four user-programmable touch free sensors to minimize crosscontamination and button wear. The EX223 meet or exceed the Class I and IIaccuracy requirements in accordance with the National Institute of Standardsand Technology (NIST) Handbook. 220g Capacity 0.001g Readability Platform: 130mm Large 5.7" full-color touchscreen display with intuitive set-up and application software AutoCal automatic internal calibration for optimized weighing performance 14 application modes, 11 weighing units and 5 display languages for a wide variety of applications 4 programmable touchless sensors for hands-free operation Modular display can be separated from the weighing base Frameless draftshield with anti-static glass, flip-top and large side entry doors on top-mounted bearings Click Here to View Product Video INCLUDED: The Ohaus EX223 Explorer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty