Centrifugation

Centrifuge FC5513-K, Frontier™ 5000 Ohaus, with rotor Designed to be comfortable and practical, Fron (more)tier Micro centrifuges feature an intuitive control interface that is easy to operate even when wearing gloves. Micro centrifuges save valuable bench space by integrating all of their functionality into a small footprint. Frontier Micro centrifuges offer high-speed operation for a range of essential laboratory applications, such as DNA/RNA preparation, ultrafiltration and more. Additionally, biocontainment rotors allow for research with hazardous samples. The equipment is completed by a silent brushless motor, high sample productivity, multi-safety control, customized programs. Included in the FC5513-K model you will get the angle rotor with maximum capacity of 24 x 1.5 / 2.0ml. Features: Maximum relative centrifugal force (x g) at 17,317 g; maximum speed 13,500 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 85 mm; 45° angle. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN - Simple and modern interface, to set parameters easily - The display shows both the set and real parameters - Clear and right display STRUCTURE AND FUNCTIONALITY - The panel is splash proof to protect the centrifuge from accidental sample spills - The maintenance-free induction motor produces G-force max. of 17317×g - Speed ​​up to 13500 rpm in less than 15 seconds (with microtubes) - 10 acceleration/deceleration settings - 99 memory sets for quick storage and easy recall of used parameters - Rotor imbalance detection systems shut down the unit when loads are out of balance TECHNICAL FEATURES Speed ​​range: 200 rpm - 13,500 rpm Maximum relative centrifugal force: 17,317 g Maximum flow rate (rotor): 24 x 1.5 / 2.0ml Program memories: 99 Rotor Packaging: Angled Rotor: 24 x 1.5 / 2.0ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Pre-refrigeration time: not applicable Rotor Compatibility: Angled 24 x 1.5ml / 2.0ml; angled 24 x 1.5ml / 2.0ml sealable; Hematocrit rotor, 24 x capillaries; corner 18x2ml spin columns Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

The Frontier™ 5000 Multi Series centrifuges are multifunctional, compact, low speed centrifuges and  (more)ideal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. HOW DOES A LABORATORY CENTRIFUGE WORK? A careful explanation with the Ohaus FC5706 model. Video presentation of the Frontier 5000 Multi centrifuges. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. COMFORT Designed for comfortable use, Frontier™ Multi centrifuges feature convenient control on an intuitive interface, allowing for responsive operation even when wearing gloves. VERSATILE Frontier™ Multi centrifuges can accommodate standard 50 and 15 mL tubes, including common blood tubes. When used with accessories, the rotors can be adapted for sizes up to 1.5ml. SAVE SPACE Frontier™ Multi centrifuges save valuable bench space by integrating all of their functionality into a small footprint. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.000 rpm. Maximum relative centrifugal force: 4.427 g. Program memories: 99. Acceleration gear: 10. Deceleration gear: 10. Lid lock: by motor. Noise level: ≤60 ± 2 dB (A). Rotor Compatibility: Angled 12 x 15ml; Angled 6 x 50ml; Oscillating rotor 6 x 5 ml. Rotor recognition method: manual. Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous. Safety certification: CE; FCC.

QUALITY LABORATORY CENTRIFUGES - OHAUS Ohaus designed this instrument to cover virtually all applica (more)tions in research, industrial and clinical laboratories. The bestselling FC5718, like the entire Frontier™ 5000 range, offers high speed performance for maximum volume, automatic rotor identification and next generation safety features. The best versatility - Large variety of compatible rotors and accessories (19 optional rotors and 121 accessories) - Microliter to 4x100ml capacities (including PCR strips and microliter plates) - High-speed centrifugation for tubes from 0.2ml up to 85ml - Available in the version with refrigeration system and variable temperature from -20°C to 40°C The best usability - Automatic recognition of the rotor in seconds - No risk of damaging the centrifuge even if used by less experienced personnel - Easy-to-read LCD control panel; two-line display and real-time information - Ergonomic adjustment knob for easy parameter setting - Ability to set and view the speed in both rpm and RCF - 99 sets of storable parameters More security - Double imbalance sensor: two separate sensors designed to detect high and low vibrations, caused by imbalances; computerized detection system with dedicated unbalance parameters for each rotor - Motorized locking system for the centrifuge lid - Overspeed protection automatically activated upon rotor installation - Better protection for both equipment and personnel You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. Applications Separation, sample preparation, cell pelletization, protein separation, nucleic acid separation, cell concentration, chemical separation, diagnostics, environmental sample preparation, blood sample processing Screen Backlit Liquid Crystal Display (LCD) Materials Corrosion resistant stainless steel chamber with polycarbonate / ABS plastic lid Additional features Ten speeds of acceleration and deceleration, selection of run time from 10s to 99h 59min or continuous, CFC-free refrigeration system (refrigerated models), sample temperature (refrigerated models), lid lock system, overspeed protection, detection double imbalance TECHNICAL FEATURES - Speed ​​range from 200 rpm to 18,000 rpm - Maximum relative centrifugal force (xg) 23,542 g - Maximum capacity (rotor) 4 x 100 ml - Program memories 99 - Acceleration gear 10 - Deceleration gear 10 COMPATIBLE ROTORS: Angle 4 x 85ml ID RB Hi. Angle 12 x 15ml RB / FA ID. Angle 24 x 1.5 / 2.0ml ID Sealable. Angle 6 x 50ml RB ID Hi. Swing out 4 x 100ml ID. Angle 12 x 1.5 / 2.0ml ID. 4 x 8W PCR Strip ID Corner. Angle 44 x 1.5 / 2.0ml ID. Swing out 4 x 100ml ID sealable. Angle 6 x 85ml ID RB. Angle 24 x 1.5 / 2.0ml ID. Angle 6 x 85ml RB ID Hi. Angle 30 x 15 ml RB / FA ID. Angle 30 x 1.5 / 2.0ml ID Sealable. Angle 10 x 50 ml FA ID. Angle 64 x 0.5ml ID. Angle 20 x 10ml ID RB Hi. Angle 6 x 50ml RB / FA ID. Swing out 2 x 3MTP ID.

The Frontier™ 5000 Multi Series centrifuges are multifunctional, compact, low speed centrifuges and  (more)ideal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5706-K model you will have the angular rotor with a maximum capacity of 12 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.427 g; maximum speed 6,000 rpm; tube diameter without adapter 18 mm / 15 ml; outer/inner radius 110 mm; angle 32°. HOW DOES A LABORATORY CENTRIFUGE WORK? A careful explanation with the Ohaus FC5706 model. Video presentation of the Frontier 5000 Multi centrifuges. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. COMFORT Designed for comfortable use, Frontier™ Multi centrifuges feature convenient control on an intuitive interface, allowing for responsive operation even when wearing gloves. VERSATILE Frontier™ Multi centrifuges can accommodate standard 50 and 15 mL tubes, including common blood tubes. When used with accessories, the rotors can be adapted for sizes up to 1.5ml. SAVE SPACE Frontier™ Multi centrifuges save valuable bench space by integrating all of their functionality into a small footprint. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.000 rpm. Maximum relative centrifugal force: 4.427 g. Program memories: 99. Acceleration gear: 10. Deceleration gear: 10. Lid lock: by motor. Noise level: ≤60 ± 2 dB (A). Rotor Compatibility: Angled 12 x 15ml; Angled 6 x 50ml; Oscillating rotor 6 x 5 ml. Rotor recognition method: manual. Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous. Safety certification: CE; FCC.

This was removed from a university lab where it was surplus to requirements THe unit powers up but s (more)hows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal. It is sold for spares/repairs. No rotor included.

Beckman Coulter Rotor Type 50.2 Ti This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition, we are unable to test it further at our facility. Features:- Type - 50.2 Ti - Max RPM - 50,000 - The Unit Has 12 x Slots For Vials - Only Use in Instruments Classified H, R, S

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

Jouan BR4i Refrigerated Centrifuge with S40 Rotor The unit powers up and has been temperature tested (more), and speed tested rotor. It is in good working order. It is in good cosmetic condition with marks from use. Max RPM- 14000 1 x Juan rotor included: -Jouan S40 Bucket Rotor with 4 x buckets with lids (0897/24) Max RPM-4300

Beckman Avanti 30 Compact Centrifuge with F0850 Rotor & Manual This item was removed from a uni (more)versity lab where it was surplus to requirements. It is in good clean condition with minor marks around the display screen. The centrifuge powers on, with screen and controls functioning correctly. Temperature and RPM settings are operational, and are in good working order (thermometer not included). Specifications: - RPM Range: 0-30,000 RPM (max RPM with F0850 Rotor fitted: 16,500)\ - Time Range: 0-9 hours 59 minutes - Temperature Range: -20°C to 40°C Includes: - Beckman F0850 Rotor - Capacity: 8 x 50 ml - Max RPM: 16,500 - Rotor removal tool - Beckman Avanti 30 Compact Centrifuge Instruction Manual - Beckman Instructions for using F0850 fixed-angle rotor

Beckman L7-65 Refrigerated Centrifuge L7-65R This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds. For this reason it is sold for spares/repairs.

Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor This was removed from a university lab where it  (more)was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Maximum capacity- 6x1000mlMax RPM- 4200 Includes: X18 Beckman 4x50ml tube slots (345371)X14 Beckman 14x15ml tube slots (339180)X3 1000ml buckets 1066g (368575)X3 1000ml buckets 1067g (368575) Model number- JS-4.2Serial number- 07U2791

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was su (more)rplus to requirements. The unit is in full working order but is not supplied with a rotor. It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

Beckman Coulter Optima L-90K Ultracentrifuge This was removed from a university lab where it was sur (more)plus to requirements. The unit has been professionally serviced and is in good working order. A full report is available on request. It is in good cosmetic condition with minor marks.

Lot of Thermo Scientific Rotor Bucket Adapters & Lids All items look to be new and unused, but a (more) lot of the packaging has been opened so we cannot confirm this. We removed the packaging for the photos. Included are the following: Thermo Scientific TX-750 Round Bucket Adapters x 2Part#: 75003638 Thermo Scientific Adapters for T-25 Nunc Easy Flask x 2Part#: 75008384 Thermo Scientific Adapters for T-75 Nunc Easy Flask x 2Part#: 75008383 Thermo Scientific Centrifuge Rotor Bucket Adapters 21x15mL x 4Part#: 75003719 Thermo Scientific TX-750 Swinging Bucket Rotor Lid x 2Part#: 75003609 Thermo Scientific Carriers for microplates and T-75 Flasks for TX-750 rotor x 4Part#: 75003617

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor This was removed from a (more) university lab where it was surplus to requirements. The item is in very good cosmetic condition and also includes its original carry case. Items features are as follows:15000rpm24,700 X G6x 100ml tube holdersQuick release autolock

Beckman Coulter Avanti J-25 Centrifuge This item was removed from a university laboratory where it w (more)as surplus to requirements. The centrifuge powers on and is in fair cosmetic condition. The condenser appears to be functional as the unit begins to cool, but a drive error is displayed on the centrifuge.Upon inspection, it was found that the motor had been disconnected, the front panel removed, and most wiring disconnected. This item is sold as-is for Spares/Repairs due to its current state. Specifications:- Serial No.: 270-728845-AA - Model No.: Avanti J-25

Beckman Coulter Bench-top Optima TLX Ultracentrifuge This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but does not run. The door locking vacuum and temperature features work, but it does not spin. We tested it with a TL series rotor (not included). It is in good cosmetic condition, with marks from age & use.

*No email thread or information provided on project page* Beckman Coulter JA-14 Fixed Angle Rotor Th (more)is item was removed from a university lab where it was surplus to requirements. The unit is in good condition with some wear. No further testing has been conducted. Specifications:- Max RPM: 14,000 - Model: JA-14 - Serial No.: 95E 2155 - 6 x 500 mL

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

This Beckman Coulter SW 32 Ti Swinging Bucket Rotor was removed from a university lab where it was s (more)urplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 6 x 100ml Max RPM: 32,000

This Beckman Centrifuge Model - JS-21 Cat no. 341737 was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has a fault with the shaft and bearings. It is sold for spares/repairs.

This Beckman Coulter FX6100 Fixed Angle Rotor 10200RPM was removed from a university lab where it wa (more)s surplus to requirements. The unit is in good cosmetic condition with minor marks from use but has not been tested. For use in Allegra X-12 series centrifuges. For 1000ml tubes.

Beckman Coulter Avanti J-HC Centrifuge This item was removed from a university lab where it was surp (more)lus to requirements. The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted. The spindle is bent. Therefore, it is listed as Spares/Repair.

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab These items were removed (more) from a university lab where they were surplus to requirement. All items are in good cosmetic condition but have not been tested. The items included are as follows: - 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g) - 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g) - 3 x Tube Holders For 15-25ml Tubes - 4 x Tube Holders 50ml Tubes

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor This was removed from  (more)a university lab where it was surplus to requirements. The item is in very good cosmetic condition and also includes its original carry case and Carbon Fiber Rotor Care Kit for this specific model. Items features are as follows:15000rpm24,700 X G6x 100ml tube holdersQuick release autolock

This Thermo Scientific FiberLite F12-6x500 LEX Fixed Angle Centrifuge Rotor was removed from a unive (more)rsity lab where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;12,000rpm24,471 x gHolds: 6 X 500ml tube

Beckman Coulter Avanti J-E Centrifuge This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has several faults. The unit requires a new board, flash card and cooling system. It is in good cosmeti condition with minor marks. It is sold for spares/repairs.

Heraeus Megafuge 1.0R Refrigerated Centrifuge This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in working order. The refrigeration was tested at 4˚C and worked well. It is in good cosmetic condition with marks from use. Rotor max RPM- 2800 The rotor holds 24 x 15ml tubes

This Beckman Coulter JA-25.50 Fixed Angle Rotor was removed from a university lab where it was surpl (more)us to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 8 x 50 mLMax RPM: 25,000

Sorvall Discovery 100SE This was removed from a university lab where it was surplus to requirements (more). The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside. It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage. It is sold for spares/repairs.