Centrifuges

Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Micro (more)processor control - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control  (more)- Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M CentrifugeFeatures - Brushless induction drive - Microprocessor control - Active imbal (more)ance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge w/ 24 x 1.5/2.0ml Rotor Due to the compact design, the Microlitre Centrifug (more)e Z207-M, is applicable even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - 24 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge Due to the compact design, the Microlitre Centrifuge Z207-M, is applicable  (more)even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge w/ 6 x 50ml RotorFeatures - Microprocessor control - Active imbalance detec (more)tion and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 50ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge w/ 6 x 50ml Rotor includes: - 6 x 50ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge Max Capacity 6 x 50 ml Max. RPM/RCF 6,000 | 4,427 x g Running Time 59 min  (more)50s / 10s increments Five Year Warranty Five Year Warranty Five Year Warranty Five Year Warranty -->Features - Microprocessor control - Active imbalance detection and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z167M Microcentrifuge, includes 18 x 1.5/2.0ml rotorThe Z167-M Microcentrifuge is a powerful, (more) compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.

Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control The SIEVA-3 Filtration Cen (more)trifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle SIEVA-3 Filtration Centrifuge The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for (more) cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3 Filtration Centrifuge includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle OLEUM Oil Testing Centrifuge, 230V ONLYThe OLEUM Oil-Testing Centrifuge is our stand alone oi (more)l testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle OLEUM Oil Testing Centrifuge, 230V ONLY includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Compact Centrifuge with Combination RotorFeatures - Microprocessor with large LCD display - E (more)lectrical lid lock - Quick access to samples - Active imbalance identifi cation and cut-off - Air Cooling System - Quick Acceleration and Deceleration - Noise level < 60 dBA, at max. speed - Easy removal of rotor, without tools - Manufactured in accordance to International - Safety Regulations, i.e. IEC 61010 The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 ml and 4 x 50 ml tubes in the same rotor. With the combination rotor there's no longer a need switch rotors, or use adapters to centrifuge 15 ml and 50 ml tubes for tissue culture. You can even process them simultaneously! Along with the unique combination rotor, the Z207-A-CMB features the unique EZ-Scroll™ touch pad which gives you ease of control and a modern feel. An advanced microprocessor control allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-A-CMB features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Centrifuge with Combination Rotor includes: - Combination Rotor - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Compact Hematocrit Centrifuge Due to its compact design the Z207-H Hematocrit Centrifuge is t (more)he perfect centrifuge for even the smallest of lab spaces. It is equipped with a hematocrit rotor for 24 x capillaries. Accompanied by Hermle’s easy to use control panel , the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-H features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Hematocrit Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges The Hermle 4 x 500ml Angle Rotor for Z4 (more)46/K and Z496 Centrifuges features a maximum speed of 8,000 RPM and a maximum RCF of 10,367 x g. This rotor is designed for use with the Hermle Z446 and Z496 Series. INCLUDED: The Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson Centry 117 Microcentrifuge, 120V Speed Range 1,000 to 13,500 RPM Capacity 1.5 - 2.0ml tubes P (more)rogram Memory 9 Programs Features - Touchscreen Control: Full-color interface displays speed, set time, and remaining run time for intuitive operation. - Custom Run Programs: Store and recall up to nine custom programs with one-button access for streamlined use. - Wide Speed Range: Achieves speeds from 1,000 to 13,500 rpm (100 to 16,800 x g) in 100 rpm increments for versatile applications. - Built-in Timer: Set run times from 1 to 99 minutes for precise control over centrifugation processes. - Temperature Stability: Proprietary air-flow system ensures constant temperature, preserving sample integrity even during extended runs. - Cold Room Compatibility: Can be used in cold room environments for added versatility. - Flexible Rotor Design: Accommodates either 1.5−2.0 mL tubes or PCR strips without the need for separate adapters, offering adaptability for various sample types. - Compact Footprint: Space-saving design takes up minimal benchtop space, ideal for crowded lab environments. With speeds up to 13,500 rpm, the CENTRY 117 Microcentrifuge has an easy-to-use touchscreen and offers one-button recall of up to nine stored custom run programs. Its proprietary air-flow system ensures temperature stability, even on extended runs, preserving sample integrity. The rotor design accommodates either 1.5−2.0 mL tubes or PCR strips. The CENTRY 117 Microcentrifuge has a full-color, touchscreen control that displays speed (rpm or rcf), set time, and remaining run time. Easily program and store up to nine custom run programs, which are simply accessed through a single button. The CENTRY 117 Microcentrifuge achieves speeds from 1,000 to 13,500 rpm (100 to 16,800 x g), which can be set in 100 rpm increments. The built-in timer lets you set any time from 1 to 99 minutes. The CENTRY 117 Microcentrifuge offers improved temperature controls with its proprietary air-flow system, guaranteeing that your samples remain at constant temperature, even during longer runs. The centrifuge can also be used in a cold room. With its combination rotor design, the CENTRY 117 Microcentrifuge can accommodate up to 24 1.5−2.0-mL tubes or 2 PCR strips (16 x 0.2 mL) without needing separate adapters, making this ideal for many labs. In addition, its compact footprint takes up less of your precious benchtop.INCLUDED: The Gilson Centry 117 Microcentrifuge, 120V includes: - Gilson Centry 117 Microcentrifuge, 120V - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 5920R Refrigerated Centrifuge The Eppendorf 5920R Refrigerated Centrifuge is a large bench (more)top refrigerated centrifuge with exceptional performance and high capacity, making it a superior choice for high-throughput applications. The Eppendorf 5920R combines outstanding functionality with an advanced operating system. It has a menu-driven, multilingual operation menu with a large backlit display that allows the user to save up to 99 programs. The FastTemp Pro function is also featured, providing fast, automated pre-cooling using a pre-programmable time and date. The refrigeration system also utilizes Dynamic Compressor Control (DCC) technology for precise cooling performance. The Eppendorf 5920R Refrigerated Centrifuge has a wide variety of rotors, buckets, and adapters available to spin all commonly used tubes, bottles, and plates. With high centrifugation speeds of up to 13,700 RPM (21,194 x g), the 5920R is certainly capable of suiting a large multitude of different applications. This centrifuge also features automatic rotor recognition along with imbalance detection for maximum operational safety. Please Note: This centrifuge includes the S-4x1000 Swing Bucket Rotor and Round Buckets, not the buckets and adapters depicted in the photo above. The included rotor reaches a maximum speed of 3,700 RPM (3,428 x g). Click Here to View Product Video INCLUDED: The Eppendorf 5920R Refrigerated Centrifuge includes: - S-4x1000 Rotor and Round Buckets - 1 Set of 5x50ml Adapters, Cat # 5825732006, Set of 2 - 1 Set of 14x15ml Adapters, Cat # 5825734009, Set of 2 - Operator's Guide - Power Cord - Full One Year Parts and Labor Warranty Eppendorf 5920R Centrifuge SpecificationsMaximum Speed13,700 RPM (3,700 RPM with included rotor)Maximum RCF21,194 x g (3,428 x g with included rotor)Maximum Capacity4 x 1000ml (4 x 1000ml with included rotor)Temperature Range-11°C to 40°CTimer10 seconds to 99:59 hours, continuousDimensions (W x D x H)29.2 x 27.8 x 15.9 in (74 x 71 x 40 cm)Weight306 lb.Electrical Requirements120V, 50/60HzComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Eppendorf 5910 Ri Refrigerated CentrifugeThe Eppendorf 5910 Ri Refrigerated Centrifuge combines high (more) capacity and performance in a compact footprint with an ergonomic design, standing out for its ease of use and versatility. This centrifuge features a large 7-inch VisioNize touch interface with an intuitive user experience providing fast and error-free operation, ensuring efficient and reproducible runs. Additionally, the documentation function and unique user management support your quality control with multiple authorization levels, password protection, and documentation of all runs and user activities. With the unique favorites function, the setting of parameters is now faster than ever. Frequently-used settings for time, temperature, and speed are directly accessible on the home screen, allowing users to create individual runs with just three clicks. With the program function, up to 99 programs each consisting of all run parameters (incl. ramps and radius correction settings) with clearly assigned names and a rotor compatibility check can be saved to avoid operation errors. The advanced temperature management of the Eppendorf 5910 Ri Refrigerated Centrifuge is more than just cooling. It offers the latest technology, such as quick pre-cooling and our patented Dynamic Compressor Control (DCC) technology for precise cooling performance. This centrifuge features an overall temperature range of -11°C to 40°C, along with a maximum speed of up to 14,000 RPM with the fastest available fixed angle rotor. Contemporary safety features such as automatic rotor recognition, rotor lifetime tracking, the new rotor compatibility check, built-in imbalance sensors, and much more ensure peace of mind. Freely programmable reoccurring tasks, such as maintenance reminders or rotor and device cleaning schedules, help to optimize maintenance of your centrifuge, reducing downtime and therefore enhancing the efficiency of the user’s lab. Together with a comprehensive portfolio of fixed-angle and swing-bucket rotors, this centrifuge accommodates a particularly broad spectrum of applications, making it the perfect choice for multiuser labs with diverse requirements. The included rotor reaches a maximum speed of 4,500 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5910 Ri Refrigerated Centrifuge includes: - S-4xUniversal Swing Bucket Rotor and Buckets - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5910 Ri Refrigerated Centrifuge SpecificationsMaximum Speed14,000 RPM (4,500 RPM with included rotor)Maximum RCF22,132 x g (3,849 x g with included rotor)Maximum Capacity4 x 1000mlTemperature Range-11°C to 40°CTimer10 seconds to 99 hours 59 minutes, continuous run (hold), or short-spinAcceleration Rates10Deceleration Rates10Noise Level< 59 dB(A)DisplayVisioNize touch interfaceDimensions (W x D x H)28.3 x 25.9 x 14.5 in. (72 x 68 x 37 cm)Weight240.3 lb. (109 kg.)Electrical Requirements120V, 60Hz, 12AComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(8) { background-color: #fffacd; }

Eppendorf 5810R Refrigerated Centrifuge w/ A-4-81 RotorFeatures - Refrigerated centrifuge for temper (more)ature-sensitive samples - Maximum speed of 14,000 RPM and maximum RCF of 20,800 x g for efficient separation - Large capacity of up to 4 x 750 mL for high-throughput processing - Intuitive control panel with easy-to-use interface - Automatic rotor recognition for safe and efficient operation - Programmable memory for up to 35 user-defined protocols - Quiet operation for minimal disturbance in the laboratory - Compact design for space-saving installation - Comes with A-4-81 rotor for 4 x 50 mL conical tubes The Eppendorf 5810R refrigerated centrifuge features a brushless motor and an internal capacity of up to four 400 ml tubes or 16 microplates. These compact, benchtop centrifuges achieve remarkable throughput of up to 48 x 15 ml or 20 x 50 ml conical tubes. The 5810R centrifuge accommodates a variety of rotors to meet your application needs, including the popular rotors F-45-30-11, A-4-81, and A-4-62. This versatile centrifuge has a maximum speed of up 14,000 rotations per minute and a maximum g-force of 20,800 x g, making it the perfect benchtop centrifuge for just about any application. With a compact height of only 13 inches, the 5810R is perfect for use in close areas or under storage shelving. This Eppendorf centrifuge has dynamic temperate capability ranging from as cold as -9C to as hot as 40C. The 5810R is considered a stable centrifuge throughout the scientific community and can be used in applications ranging from separating cell lysates to creating DNA precipitations. The refrigerated centrifuge also features an onboard LCD display for rotation speed, time left in cycle, and internal temperature. Please Note: This centrifuge includes the A-4-81 Swing Bucket Rotor and Buckets, not the rotor, buckets, and adapters depicted in the photo above. The included rotor reaches a maximum speed of 4,000 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5810R Refrigerated Centrifuge w/ A-4-81 Rotor includes: - A-4-81 Rotor and Buckets - 1 Set of 15ml Adapters - 1 Set of 50ml Adapters - Operator's Guide - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5810R Centrifuge w/ A-4-81 Rotor SpecificationsMaximum Speed14,000 RPM (4,000 RPM with included rotor)Maximum RCF20,800 x g (3,220 x g with included rotor)Maximum Capacity4 x 400ml (4 x 250ml with included rotor)Temperature Range-9°C to 40°CTimer1 to 99 minutes, adjustable in 1 minute incrementsDimensions24 x 28 x 13 in.Weight218 lbs.Electrical Requirements120V, 50/60Hz, 20ACatalog Number (Centrifuge Only)022625101Comparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(7) { background-color: #fffacd; }

Eppendorf 5702R Refrigerated Centrifuge with A-4-38 Rotor The Eppendorf 5702R centrifuge has a maxim (more)um speed of 4,400 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702R has a maximum capacity of 4 x 100ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. Temperatures from -9C to +40C. With a relatively small footprint, the Eppendorf 5702R benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702R has a total weight of only 84 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702R can be used in a range of settings, from clinical to cell culture labs. INCLUDED: The Eppendorf 5702R Refrigerated Centrifuge w/ A-4-38 Rotor includes: - A-4-38 Swing Bucket Rotor w/ Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Operator's Guide - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5702R Centrifuge with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 100 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesTemperature Control-9C to +40CComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor The Eppendorf 5430R Refrigerated Centrif (more)uge w/ Selectable Rotor is a sophisticated and versatile laboratory device, tailored for a broad range of applications. It boasts a maximum speed of 17,500 RPM and a minimum speed of 100 RPM, coupled with an impressive maximum relative centrifugal force (RCF) of 30,130 x g. This centrifuge can accommodate various sample sizes with its maximum capacity of 48 x 1.5/2.0 ml or 6 x 50 ml. It features a broad temperature range from -11°C to +40°C, making it suitable for temperature-sensitive samples. The centrifuge is equipped with a timer that ranges from 30 seconds to 9:59 hours, including a continuous run option. Designed for user convenience, it includes a soft-touch, one-finger lid closure for ergonomic operation. The operation menu is menu-driven and multilingual, offering options in English, German, French, and Spanish, and is complemented by a large backlit display for ease of use. The device allows for quick access to routine programs with its five program keys and can save up to 50 user-defined programs. Enhanced safety features include automatic rotor recognition and imbalance detection. Additionally, the Eppendorf QuickLock System enables quick and easy opening and closing of the rotor lid, streamlining the workflow. INCLUDED: The Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor includes: - Selectable Rotor - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor SpecificationsMaximum Speed17,500 RPMMinimum Speed100 RPMMaximum RCF30,130 x gMaximum Capacity48 x 1.5/2.0 ml or 6 x 50 mlTemperature Range-11°C to +40°CTimer30 seconds to 9:59 hours, with continuous runNoise Level< 56 dB(A)Maximum Kinetic Energy10,000 JDimensions (W x D x H)14.9 x 25.2 x 11.7 in. (38 x 64 x 29.6 cm)Weight123.5 lb. (56 kg)Electrical Requirements120V, 50/60Hz, 6A, 475WDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor The Eppendorf 5427R Refrige (more)rated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor stands out when it comes to meeting the demand for high sample throughput, unlike many other centrifuges that struggle with capacity limitations. This centrifuge boasts increased workloads, delivering rapid run times with unwavering reliability. What sets this centrifuge apart is its user-friendly design and intuitive interface, ensuring a comfortable and straightforward user experience allowing easy adjustments within the speed range of 100 to 16,220 RPM. Consequently, the 5427R emerges as the perfect solution for advanced research needs. Moreover, it incorporates innovative compressor technology that takes ecological considerations into account. This technology allows for precise temperature control from Ambient -11°C to +40°C, safeguarding sensitive samples and ensuring their optimal preparation for analysis. The 5427R also offers a wide range of high-quality aluminum rotors tailored to specific applications. In addition to established rotor types, it introduces specially designed models to cater to diverse research requirements.The included FA-45-30-11 Fixed Angle Rotor reaches a maximum speed of 14,000 RPM and maximum RCF of 20,817 x g. INCLUDED: The Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor includes: - FA-45-30-11 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor SpecificationsMaximum Speed16,220 RPM (14,000 RPM with included rotor)Minimum Speed100 RPMMaximum RCF25,001 x g (20,817 x with included rotor)Maximum Capacity48 x 1.5/2.0 ml (30 x 1.5/2.0ml with included rotor)Temperature Range-11°C to +40°CTimer10 seconds to 9:59 hours, with continuous runAcceleration Time22 secondsDeceleration Time19 secondsNoise Level< 56 dB(A)Dimensions (W x D x H)12.6 x 21.3 x 10 in. (31.9 x 54 x 25.4 cm)Weight66.1 lb. (30 kg)Electrical Requirements120V, 50/60Hz, 4.6A, 550WComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Eppendorf 5425R Refrigerated Centrifuge The Eppendorf 5425R Refrigerated Centrifuge is a whisper qui (more)et refrigerated microcentrifuge offering an outstanding set of features for a broad range of molecular and cell biology applications. The 5425R provides precise temperature control for processing temperature-sensitive samples with its advanced cooling system. This system ensure reliable cooling at 4°C even at maximum rotor speed, and features a short pre-cooling time of just 8 minutes (21°C to 4°C). The 5425R also features a wide speed range, with a minimum speed of 100 RPM and a maximum speed of 15,060 RPM. With a comprehensive range of 6 rotors as well, this broadens the spectrum of applications of the 5425R. The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5425R Refrigerated Centrifuge includes: - FA-24x2 Fixed Angle Rotor with Aerosol Lid - Operator's Manual - Rotor Wrench - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5425R Refrigerated Centrifuge SpecificationsMaximum Speed15,060 rpmMaximum RCF21,300 x gMaximum Capacity24 x 1.5/2.0 ml 10 x 5.0 mlTemperature Range-10°C to +40°CTimer10 seconds to 9:59 hours, with continuous runAcceleration Time15 secondsDeceleration Time15 secondsDimensions (W x D x H)11.42 x 18.9 x 10.24 in (29 x 48 x 26 cm)Weight46.3 lb. (21 kg)Electrical Requirements120V, 50/60Hz, 3.2A, 360WComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixe (more)d Angle Rotor is a whisper quiet microcentrifuge offering an outstanding set of features for a broad range of molecular and cell biology applications. Short runs up to 12 minutes are whisper quiet at an average noise level of 45 dB(A) and maximum RCF of up to 21,300 x g. This is sufficient for centrifugation steps of most routinely used DNA/RNA purification kits. The 5425 also features a wide speed range, with a minimum speed of 100 RPM and a maximum speed of 15,060 RPM. With a comprehensive range of 6 rotors as well, this broadens the spectrum of applications of the 5425. The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor includes: - FA-24x2 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor SpecificationsMaximum Speed15,060 RPMMaximum RCF21,300 x gMaximum Capacity24 x 1.5/2.0 ml 10 x 5.0 mlTemperature RangeN/ATimer10 seconds to 9:59 hours, with continuous runAcceleration Time15 secondsDeceleration Time15 secondsDimensions (W x D x H)9.45 x 15.35 x 9.45 in. (24 x 39 x 24 cm)Weight34.39 lb. (15.6 kg)Electrical Requirements120V, 50/60Hz, 3.8A, 280WRefrigerationNo Refrigeration

Benchmark Sprint™ 8 Plus Clinical Centrifuge with 8 x 15ml fixed angle rotor, 115VFeatures - 8 Posit (more)ion fixed angle rotor rotor - Ideal for rapid production of serum and plasma - Unique EZ-Scroll™ touch pad - Digital speed control in rpm or rcf with adjustable acceleration and deceleration rates (up to 6,800rpm/4,445xg) - Program storage up to 99 - Adjustable speed and timer The SPRINT™ 8 PLUS Clinical Centrifuge, with its 8 x 15ml fixed rotor, offers a notable advantage over traditional clinical centrifuges. With an increased speed capability of up to 4445xg, it allows for the separation of serum or plasma in as little as 2-3 minutes. With a large back-lit display, high-capacity rotor, and adjustable settings, it provides efficient and user-friendly operation Features such as the imbalance detection system and electrical lid lock ensure safe operation. Additionally, momentary operation capability adds further convenience to the centrifuge's functionality. INCLUDED: The Benchmark Sprint 8 Plus Clinical Centrifuge with 8 x 15ml fixed angle rotor, 115V includes: - 8 x 15mL Fixed Angle Rotor - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge The Sprint 8 includes an eight position,  (more)fixed-angle rotor for the centrifugation of 10ml blood tubes (16 x 100mm), and 15ml conical tubes (17 x 120mm). Smaller blood tubes (12 x 75mm and 12 x 100mm) are also compatible with the use of optional adapters (C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply use the up/down buttons to select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for the removal of samples.Ideal for Coag, PPP and urinalysis studies.INCLUDED: The Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge includes: - Portable centrifuge - Leveling kit - Car power adapter - One Year Manufacturer's Warranty

Benchmark C5000-6H-PT Sprint 6H Portable Clinical Centrifuge The Sprint™ 6H Portable kit allows for  (more)mobile processing of clinical applications. The package includes a 6 position swing out rotor for blood tubes, 12V voltage adapter, and adjustable leveling stands to match various car seat angles and ensure balanced centrifugation.Designed for use with 10ml tubes (16 x 100mm), smaller tubes (12 x 75mm and 12 x 100mm) can be centrifuged using the optional adapters (item: C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for removal of samples.INCLUDED: The Benchmark C5000-6H-PT Sprint 6H Portable Clinical Centrifuge includes: - 12V Car adapter - 6 Position swing out rotor - Adjustable leveling stands - Two Year Manufacturer's Warranty