New Brunswick Water Bath Shaker Model - Classic C76 Lab

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Memmert WNE-10 Water Bath 10L This was removed from a university lab where it was surplus to require (more)ments. The unit is in full working order. it has been tested against a digital thermometer (not included). It is in reasonable cosmetic condition but is very stained inside.

Nickel Electro Clifton 56L NE2-56D Water Bath This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in good working order. (It was tested with a temperature probe, not included). It is in good cosmetic condition with minor marks. Capacity- 56L Temperature range: ambient +5 to 100˚C Electric Supply: 230V 50/60Hz Serial number- 98307

Thermostatic bath with  circulation GFL 1012. Volume 7 L. Ambient temperature range +5 ° C to + 99.9 (more) ° C. Digital display Temperature adjustment by microprocessor with increments of 0.1 ° C. Short preheating. Security systems overheating and alarms. Stainless steel. Cover and rack. User manual.

Julabo SW22 Shaking Water Bath 115V/60Hz (NRTL Certified) Working Temperature Range 20°C to 99°C Sh (more)aking Speed Range 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW22 Shaking Water Bath 115V/60Hz (NRTL Certified) includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 290300 Hot Tub - Water Bath, 28L w/polycarb lid 115VThe Boekel Scientific290300 Ho (more)t Tub - Water Bath, 28L w/polycarb lid can be used as a standard waterbath or as a boiling water bath. User simply sets temperature into “boilingmode”. The unit has digitally controlled temperature with a built-inprogrammable timer. The temperature control is extremely accurate due to athree point factory calibration set in 0.1°C increments up to 100.0°C andPID controller. The Boekel Scientific 290300 Hot Tub - Water Bath, 28L featuresa large digital display, a seamless, passivated stainless steel tank, andheating indicator LED.Applications General purpose water baths offer excellent performance and are ideal for general lab applications. The special "boiling mode" is a convenient feature for melting agar and other applications requiring boiling temperature. INCLUDED: The Boekel Scientific 290300 Hot Tub - Water Bath, 28L w/polycarb lid 115V includes: - Polycarbonate Lid - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Single-channel electronic pipette 735061 SARTORIUS Picus 10 to 300 µl New material in its original p (more)ackaging Number of channels: 1 SARTORIUS reference: 735061 Capacity: 10-300 µl Increments: 0.20 µl Optifit tips: 350 µl Maximum volume precision: 0.15 (≤ CV%) Maximum volume precision: 0.4 (± R%) Dimensions (WxDxH): 335 x 150 x 130 mm

Progressive scan type 2/3″ CCD, super-high-resolution with 1.4 million pixels (1280×1024) 5.1 cm pol (more)ysilicone TFT display for frame and focus adjustment in preview mode Camera control with handswitch, avoids vibrations of camera head and guarantees sharp images Photometric system with integral (30%) and spot (1%) metering possibility Automatic exposure adjustment with auto-exposure lock +/- 3 step compensation JPEG image format with three resolution modes 3.3 V SmartMedia (SSFDC) with 8 MB intermediate image storage without PC Direct printing to Olympus P-330E high resolution dye-sublimation printer (306 dpi) Camera control with personal computer via serial interface

Gilson PIPETMAN L Multichannel P8x10L, 0.5-10 uL Pipette Designed for performance and comfort, PIPET (more)MAN® L comes in acomprehensive range of models adapted to your needs in the lab. Comfortable,precise, accurate, and reliable, use PIPETMAN L pipettes confidently in yourapplications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volumesingle channel models covering a volume range from 0.2 μL to 10 mL - Variable volumemultichannel models covering a volume range from 0.5 μL to 1200 μL, includingfour models equipped with V-rings (VR) at the bottom of the tip holder for aproper fit with most tip brands, covering a volume range from 20 µL to 300 µL - Fixed volumesingle channel models covering a volume range from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines an ergonomicdesign with minimized pipetting forces, giving you the ability to pipettelonger without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you.Secure PipettingReduce pipetting errors and avoid accidental volume changesduring pipetting cycles with a true volume-locking mechanism for improvedaccuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals.Choose your ModelChoose your channel number and volume range, up to 1200 μLfor various protocols. Four PIPETMAN L multichannel models equipped withV-rings (VR models) offer an improved compatibility with tips from otherbrands.GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN L Multichannel P8x10L, 0.5-10 uL Pipette includes: - Operator's Guide - 3 Year Manufacturer's Warranty