GRANT GD 100

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Grant GD100 recirculating bath. Temperature 37 ºC. Bucket volume of 12 L. Digital thermostat. Visual (more) failure alarm. With cover. Includes user manual. The Grant GD100 immersion circulation bath is high-quality laboratory equipment that allows maintaining a constant and uniform temperature in liquid samples. With a capacity of 8 liters, this bath is ideal for a wide range of applications, from incubating cultures to preparing samples for laboratory testing. Equipped with a digital temperature controller and an efficient circulation system, the Grant GD100 bath ensures homogeneous heat distribution, resulting in higher precision in experiments. Plus, its compact and durable design makes it a reliable choice for demanding laboratory environments. Whether you work in scientific research, chemical analysis, or any other discipline that requires precise temperature control, the Grant GD100 Immersion Circulating Bath is an essential tool to help you achieve consistent and reliable results in your research.

Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C t (more)o 100°C Heating Capacity 1000W Volume 5L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO C-B27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 27L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: -28°C to 200°C Temperature stability: ±0,01°C Temperature resolution: 0,1°C Flow  (more)rate (at 0 bar): 11 to 16 L/min Max pressure (at 0 liters): 0.23 to 0.45 bar Dimensions (WxDxH): 230 x 420 x 610 mm Bath opening (WxL): 120 x 140 mm Bath depth: 140 mm Bath filling volume: 3 to 4.5 L Weight: 31 kg

Temperature range: ambient +5ºC to 99ºC Temperature display and setting resolution: 0.1ºC Temperatur (more)e stability: ±0.2ºC Capacity: 26 L Unique Set and Forget technology – fast heat-up, accurate temperature control Simple, intuitive controls – quick and easy to set temperature Suitable for use with heat transfer beads Adjustable over temperature alarm – protect samples from over heating Practical front panel lock – disables front panel controls preventing unintentional changes Drain tap included

Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1400eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1400eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1400eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 200 g for F2 class and lower. The comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator XA 5Y.KO series comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The comparator features an aesthetic, large weighing chamber and a glass draft shield in one. Its asset is an automatic door opening system. The XA 5Y.KO series features an intuitive menu supporting a user in instrument operation.

Labconco FreeZone Stoppering Tray Dryer FreeZone Stoppering Tray Dryers lyophilize moderate to larg (more)eloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen. Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801000 FreeZone Stoppering Tray Dryer 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036110232 Hei-PLATE Mix 'n' Heat Ultimate Hotplate Stirrer, 145mm Plate The Heidolph 036110 (more)232 Hei-PLATE Mix 'n' Heat Ultimate Hotplate Stirrer, 145mm Plate paves the way for future-oriented working practices: thanks to its equipment with numerous interfaces, it meets all requirements for digitalization and network. The RS232 and USB B interfaces allow control via our Hei-Control software, free of charge, as well as our Hei-PROCESS solution. With the LAN interface, you can directly integrate the device into a network, whereas the USB A interface located at the front allows data logging via USB stick. Use the USB C interface and combine the magnetic stirrer with the electric Heidolph Lab Jack to work even more comfortably and securely. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. The possibility to program ramps and to create profiles gives you full control and increases the precision and reproducibility of your experiments. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50°C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times. Click Here to View Product Video INCLUDED: The Heidolph 036110232 Hei-PLATE Mix 'n' Heat Ultimate Hotplate Stirrer, 145mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty