Labconco 302421101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening, Service Fixture, UV Light, Vacu-Pass Portal, and Base Stand, 115V, 60Hz

Labconco 3889201 Ventus Canopy Connection Kit for 4-Ft Class II Type A2 Logic+ Biosafety Cabinet The (more) Labconco 3889201 Ventus Canopy Connection Kit for 4-Ft Class II Type A2 Logic+ Biosafety Cabinet provides thimble ducting Class II, Type A2 Biosafety Cabinets. The canopy provides an air gap to allow room air to enter the ductwork and mix with the filtered air being exhausted to the outside. Inadequate exhaust activates the switch in less than one second and triggers the Class II, Type A2 biosafety cabinet to signal an audio and visual alarm via the LCD display. The motor also increases to maximum speed for personal safety during exhaust failure. The Labconco 3889201 Ventus Canopy Connection Kit for 4-Ft Class II Type A2 Logic+ Biosafety Cabinet adds only 1.25" to the overall height of the biosafety cabinet and is comprised of powder-coated steel. The outlet is 10" (25.4 cm) ID. An exhaust connection is required. A Damper (Catalog Number: 3776800) and Remote Blower (Catalog Number: 7068000 or 7068200) are recommended and are not included. INCLUDED: The Labconco 3889201 Ventus Canopy Connection Kit for 4-Ft Class II Type A2 Logic+ Biosafety Cabinet includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 342691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope- (more)Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 342691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 342691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Dimensions (WxHxD): 1200 x 1970 x 600 mm No keys included

Dimensions (HxWxD): 1380 x 1280 x 790 mm Internal dimensions (HxWxD): 655 x 1190 x 600 mm Height bas (more)e: 800 mm Air volume recirculation: 887 m3/h Air volume exhaust (at 0,45 m/s): 363 m3/h Air volume total: 1250 m3/h Standard lighting: 2 x 36 W Light level up to 2500 Weight including base: 240 kg Including new filters

Type CA/REVS6 Prefilter 40 168cm DIN 12950 T Downflow filter: 18P6+ Exhaust filter: 7P6+ Counter: 78 (more)943.72h 129 x 83 x 222cm Outside Dim: 1480 x 1900 x 860 mm Internal Dim: 690 x 1800 x 600 mm Frame height: 755 mm The sterile air flow in the cabinet keeps the material free from contamination and pollution (product protection); the downflow also provides reasonable protection against cross-contamination during the experiment. Due to the intake of air from the laboratory room, a protective air curtain is created at the front of the cabinet (personal protection).

Average inflow airflow: 0.45 m/s Average downflow airflow: 0.30 m/s Inflow airflow volume: 524 m³/h  (more)Downflow (70%) airflow volume: 1258 m³/h Exhaust (30%) airflow volume: 524 m³/h Internal dimensions (WxDxH): 1870 x 623 x 670 mm Useable work area: 0.9 m² Dimensions (WxDxH): 2030 x 815 x 1540 mm Base stand height (min/max): 711/864 mm Sound emission: < 61 dBA Fluorescent lamp intensity: > 1150 Lux Weight: 350 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA HS 260 Control Shaker Type of Movement Reciprocating Speed Range 10 to 300 RPM Shaking Stroke 20 (more) mm Features - Electronic adjustment of speed and timer - Digital display makes it possible to read the speed, timer function and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuous operation (endless) - With integrated endpoint positioning (for automated robot-controlled sampling) - All functions can be controlled and documented with labworldsoft® software - Wide range of attachment combinations makes it possible to use almost all shapes and sizes of vessels - Attachments are not included, please order separately The HS 260 control open air reciprocating shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 7.5 kg, it can handle a variety of vessel sizes and shapes. The shaker's integrated end point positioning function is highly useful for automated robot-controlled sampling.

Hermle Z167M Microcentrifuge, includes 18 x 1.5/2.0ml rotorThe Z167-M Microcentrifuge is a powerful, (more) compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW