IKA HS 260 Control Shaker

Benchmark BenchRocker 3D Nutating Shaker The BenchRocker 3D is designed to provide the precise speed (more)s and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results. Proprietary InstaTilt technology means no tools, no disassembly. Simply grip the platform with two hands and move to the desired position. This model includes both flat and dimpled (autoclavable) mats for mixing a wide variety of tubes and other vessels. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. BenchRocker 3D features a maintenance free, brushless motor, capable of loads up to 4.4 lbs and is safe for use in cold rooms and incubators. INCLUDED: The Benchmark BenchRocker 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat and Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISLDMPHDGL Incubating Shaker The Ohaus ISLDMPHDGL Incubating Light Duty Shaker with Opaque Lid (more) is designed to incubate samples from 5° ambient to 65° C depending on the model are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks and comes with an opaque lid for light sensitive samples. The ISLDMPHDGL features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLDMPHDGL Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLDMPHDGL Incubating Shaker Specifications Temperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps GENIE Temp-Shaker 300 with Un (more)iversal Ratcheting Clamps provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps Specifications Speed (RPM) 35-300 RPM Temperature Range 28C - 75C Orbit 19mm Product Weight 9 Kg (20 lbs.) Overall (D x W x H) 450 X 480mm (17.6 x 19in) Platform Capacity 3 Kg (6.6 lbs) Platform Dimension 305 x 305mm (12 x 12in) Chamber Volume 40 L (2400 cubic inches) Chamber Height 305mm (12in) Warranty 24 months Markings CE

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (610 x 610mm) with non-slip rubber mat included.

Thermo Scientific Cimarec-i Telesystem 15-40 Multipoint Shaker New equipment in its original packagi (more)ng Reference: Cimarec i 50088036 Set comprising a magnetic induction stirrer (without motor) and a remote control box. 15 stirring stations Ideal for use in immersion in water baths up to 50°C Automated start-up for progressive acceleration of the magnetic bar Perfect for use in incubators and climatic chambers Delivered complete with Telemodul control box Telesystem 15.40: With Telemodul 40 C remote control box Speed ​​range: 100 to 2000 rpm Volume: up to 1200 ml per stirring station Dimensions: L x W x H: 240 x 420 x 35 mm Protection: IP 68 Weight: 8kg Ambient conditions: Permissible temperature: -10 to +56°C / RH: 100% Gross weight: 11.677 kg Gross dimensions: 57.5 x 39 x 34.5 cm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Agilent Eclipse Fluorescence Spectrometer. The unit is in full working conditi (more)on and is ready for immediate release. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Type:Benchtop fluorescence spectrometer Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Bioluminescence,Time resolved phosphorescence. Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm

Spectra Physics  2020-45 Laser with 2560 Power Supply & 2270 Control Box This system was r (more)emoved from a university lab where it was surplus to requirements. Included are; 1 x Spectra Physics Laser Model 2025-45The unit is in good cosmetic condition but we were not able to power on the unit as it had been hardwired and disconnected from its previous location. 1 x Spectra Physics Power supply Model 2560We were unable to power this up as it has been previously hard wired. It is in good cosmetic condition but has marks from dust and grime. The unit is supplied with Keys. 1 x Spectra Physics Control Box Model 2270The unit is in good cosmetic condition but we were not able to power the unit as the power supply powers the unit.

IAC Amplivox 250 Series Mini Sound Shelter w/ CA850 Automatic Audiometer This system was removed fro (more)m a university lab where it was surplus to requirement. Both the Mini Sound Shelter and Automatic Audiometer are in good cosmetic condition and power on. The soundproofing functions effectively, as demonstrated through vocal testing within the booth. However, further testing could not be complete as the unit does not include headphones. Included; - Amplivox 250 Series Mini Sound Shelter - Amplivox CA850 Series 4 Automatic Audiometer

This item has just arrived in our stock. Please enquire for further details.

MiniVertigel 2 APELEX for 2 gels 0.8mm 10 x 10cm New equipment in its original packaging Reference:  (more)400000 Comes complete with casting base Useful dimensions of gels 9 x 8.5 cm (L x H) Glass plates 10 cm x 8-10 cm Height Volume of acrylamide for 2 gels 15 ml Constant current 15 to 30 mA per gel Voltage from 150 to 300 Volts Migration time: 30 to 60 minutes

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.