Safety cabinet CS60 A+B PVC CHEMISAFE

INTEGRA FIREBOY eco safety Bunsen burner + pedal Mobile Bunsen burner with two adjustment knobs for  (more)gas and air, Gas type: Natural gas, butane, propane L×P×H: 100×150×60 mm Weight: 1.3 kg Traces of green oxidation on the copper burner

Manufacturer: S.C.A.T. Model: S 60 Waste Cans Canisters Containers 10L conductive 107953 P/N: 10795 (more)3 Description: Canister S 60 is a container for all purposes and suitable for the S.C.A.T. Safety System. Specifications: - Contents: 10 L- Material: PE-HD, electrostatic conductive- Thread: S 60- Dimensions (W x H x D): 185 x 265 x 290 mm- UN Approval Items delivered: - 2x S.C.A.T. S 60 Waste Cans Canisters Containers 10L conductive 107953 Condition: The canisters are in very good cosmetic as well as technical condition. They are both 100% functional tested and ready to be used.

Wentworth Laboratories Model AVT701 Vibration Isolation Table This was removed from a university la (more)b where it was surplus to requirements. It is in reasonably good cosmetic condition but has marks from use. It has not been tested. Plate on top dimensions - 68 x 49.5cm Whole table dimensions - 90x63x75cm LWH

4 x Melles Griot Optical Table Passive Isolator Legs This was removed from a university lab where i (more)t was surplus to requirements. The units are in good cosmetic condition but have not been tested. Product#: 07 OTi055Serial#: 700247Load Capacity: 1100kgAir supply pressure: 80PSi

Esco Laminar Ductless Flow Cabinet Clean Bench Model AHC-4D1-1 Lab This item was removed from a univ (more)ersity where it was surplus to requirement. In excellent cosmetic condition with very little signs of previous use. This unit is in full working order. The previous owner reported the cabinet had done very little work and was working normally. It was last serviced by on 18-04-2024 Please take note of the following specifications: - Usable work area: 0.59 m^2- Air volume: 815 cm^3/h- Work height: 77 cm from the floor- Prewired and fittings for UV lamp (UV lamp not included)- The cabinet is mounted on a sturdy trolley with four castors, two of which can be locked.- Two pre-filters are installed in the roof panel. Order Code CR/PF-2 for a pack of 6.

Telstar Bio II Advance Plus 6 Biosafety Cabinet. H14 HEPA filters complying with EN 1822: 99.995% MP (more)PS and 99.999% DOP efficiency. ISO 4 air quality complying with ISO CD 14644-1: 353 part. ≥0.5 µm/m3, 10,000 part. ≥0.1 µm/m3. Laminar airflow velocity 0.35 m/s. Laminar flow rate. Display providing flow rate, timer, UV and fan programmer. Audible and visual alarms. Sliding window to adjust working opening to 200 mm with one hand. Hinged front window can be fully opened for easy and thorough cleaning. Easy cleaning. Easy access filters. Low noise level <58 dB. Base stand NOT included. Working surface 1869*602*580 mm. External dimensions (LAF): 2040*870*1640 mm. User manual. Ensure a safe working environment with the Telstar Bio II Advance Plus 6 Biosafety Cabinet, available at Galileo Equipment. This state-of-the-art cabinet offers maximum protection for the user, the sample and the environment, ideal for laboratories that handle pathogens. With advanced HEPA filtration technology and laminar flow, it guarantees optimal performance and superior safety. Its ergonomic design, energy efficiency and large workspace make the Telstar Bio II Advance Plus 6 the perfect choice for any laboratory. Buy now and optimize your safety with our exclusive offers!

Precision refrigerator for the safe storage of samples in the scientific and medical sector - Comple (more)te display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene cabinets injected with polyurethane foam that provides strong thermal insulation - Automatic internal LED lighting for lower energy consumption - Monobloc cabinet made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Digene DML 2000 Hybrid Capture System Lab Model#: 8441-11/6421-240 This item is sold on behalf of a  (more)client. It is surplus to requirements. It is in good cosmetic condition and full working order. It is available for collection from London, UK, but we may be able to offer shipping for an additional fee. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Mitsubishi Melfa RV-6S Industrial Robotic Arm, CR2B Controller, R28TB Teach Wand This system was rem (more)oved from a university where it was surplus to requirement. All components are in good cosmetic condition. The controller and power supply unit power on, we are unable to test the system further at our facility The system consists of the following: Mitsubishi Melfa RV-6S Robot ArmModel RV-6S-S12Serial No. AR906002RYear 20096 AxisFitted with heated ACTOR probeWeight 58 kg Mitsubishi Melfa CR2B-574 Control UnitModel CR2B-574-S12Serial No. A10906003M Mitsubishi R28TB Teaching WandSerial No. S11800

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than &frac14; of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 &micro;l &le; V &lt; 20 &micro;l 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 &micro;l &le; V &lt; 200 &micro;l 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 &micro;l &le; V &le; 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 &micro;l only if the expanded uncertainty in use is less than &frac14; of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 &micro;l, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than &frac14; of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Scilogex Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml rec (more)eiving flask KS 35/20 The Scilogex Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20 includes a vertical dry-ice condenser, a 1000ml evaporating flask with an NS 24/40 joint, and a 1000ml receiving flask with a KS 35/20 joint. This set is designed for use in rotary evaporators, which are commonly used in chemistry and biology laboratories to remove solvents from liquid samples. The evaporating flask is used to hold the sample, while the receiving flask collects the condensed solvent. The vertical dry-ice condenser included in this set has a cooling surface area of 1700cm^2, which provides efficient cooling to the sample during the evaporation process. The use of dry ice as a cooling agent ensures that the temperature of the sample remains constant, which is crucial for obtaining accurate and reproducible results. The evaporating flask has an NS 24/40 joint, which is a standard size that is compatible with a wide range of rotary evaporators. The receiving flask has a KS 35/20 joint, which is also a standard size that is compatible with many rotary evaporators. INCLUDED: The Scilogex Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20 includes: - 1000ml Evaporating Flask NS 24/40 - 1000ml Receiving Flask KS 35/20 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty