Safety cabinet CS120 BASIC PVC CHEMISAFE

5 Level Shelf Ht 1750mm x P400mm CODIGEL Shelving Lot composed of: An in-line shelf: 2x856mm on 5 le (more)vels - L = 1682mm (CODIGEL reference: EA-0146) Very solid, durable and hygienic shelving with 15 micron anodized aluminum structure and high density polypropylene shelves They withstand temperatures from -30°C to +75°C, as well as distributed loads of 100kg/m or 120kg per shelf Adjustable feet New equipment in its original packaging

COMBISTORAGE CS260 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Ventilation and filter - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

CS 60 A+B (ACID+BASIC) BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in  (more)HD PVC - Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

This Bigneat F3-XIT-D Powder Weighing and Handling Cabinet was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with some marks and paint chips/rust from use.

Esco Laminar Ductless Flow Cabinet Clean Bench Model AHC-4D1-1 Lab This item was removed from a univ (more)ersity where it was surplus to requirement. In excellent cosmetic condition with very little signs of previous use. This unit is in full working order. The previous owner reported the cabinet had done very little work and was working normally. It was last serviced by on 18-04-2024 Please take note of the following specifications: - Usable work area: 0.59 m^2- Air volume: 815 cm^3/h- Work height: 77 cm from the floor- Prewired and fittings for UV lamp (UV lamp not included)- The cabinet is mounted on a sturdy trolley with four castors, two of which can be locked.- Two pre-filters are installed in the roof panel. Order Code CR/PF-2 for a pack of 6.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Millipore Merck Model: Manu-CART Items delivered:- 1x Cap Nut- 2x Spin Collects- 1x En (more)d Fitting

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39922 Disov3ry Paste Extruder ITEM-39923 Ci Robal SystemITEM-39924 Various CryotanksITEM-39925 Stuens Knuth Rotor ITEM-39927 Pyrex Freeze dryer chamber ITEM-39074 Eppendorf Minispin ITEM-39076 Sprout Centrifuge ITEM-39075 Start see-saw rocker SSL4 ITEM-39073 Capex 2dc ITEM-39930 Russel Hobbs MicrowaveITEM-39966 FisherBrand FB 70155 x 2 ITEM-39962 Nalgene Bottle x 2ITEM-39072 Gilson Pipet StandITEM-41032 2 x Boxes Gilson Pipetman kits ITEM-41042 2 x Boxes VWR Weigh BoatsITEM-41043 Mixed Miscellaneous plasticware ITEM-41044 Box of Thermo Scientific Nunclon PlatesITEM-41045 Applied Biosystems 96 Well Starter KitITEM-41046 4 x Mettler Toledo SensorsITEM-41047 Bio-Rad Bio-Dot ApparatusITEM-41048 Bio-Bin Pipet/Sharps Bins with Z stands ITEM-41049 Box of mixed assorted Plastic Syringes ITEM-41050 Box of mixed brand assorted plastic tubes/vials ITEM-41051 5 x Nalgene 1000ml Plastic BottlesITEM-41052 Pack of 4 Corning 500ml Centrifuge TubesITEM-41053 Corning 2L Erlenmeyer Flask ITEM-41054 Azlon 2000:20ml Plastic Flask ITEM-40939 IKA RCT basic Magnetic stirrer with heatingITEM-40940 Lafert D/351VM/7 Pump ITEM-40941 Lafert D/351VM/7 Pump ITEM-31370 Maps Trainer Telestrator System

Peak Scientific NitroGen N300DR Nitrogen Generator This item was removed from a university lab where (more) it was surplus to requirements. The unit is in good cosmetic condition with some light staining on the top panel. It powered on and initialised, but the compressor did not run, and a system fault was displayed after a few minutes. Therefore, it is listed as Spares/Repair.

Yamato LM-200A Overhead Flask Mixer, 115V Speed Range 50~1000 rpm Max. torque 0.1N•m Adaptable flas (more)k size 50~5000 ml Features - Wide range rotation speed of 50-1000 rpm - Maintenance free and superior DC brushless motor - Belt drive transmission minimizes noise and vibration - Capable of vacuuming up to 399.9Pa without impairing rotation efficiency - Directly attachable to a three-neck flask 24/40, 29/42 optional - Variety of stirring shafts and blades available to handle small to large volume samples - Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option - At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option - Equipped with 24/40 rotary joint, 29/42 optional - Capable of AC100-240V by changing power cord Compact design laboratory flask stirrer featuring integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. Equipped with digital indicator. Wide range rotation speed of 50-1000 rpm. Maintenance free and superior DC brushless motor. Belt drive transmission minimizes noise and vibration. Capable of vacuuming up to 399.9Pa without impairing rotation efficiency. Directly attachable to a three-neck flask 24/40, 29/42 optional. Variety of stirring shafts and blades available to handle small to large volume samples. Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option. At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option. Equipped with 24/40 rotary joint, 29/42 optional. Operating speed range 50-1000 rpm. INCLUDED: The Yamato LM-200A Overhead Flask Mixer, 115V includes: - Hexagon socket head cap screw & wrench - AC Adapter - 3m Power Cord - Coupling Cover - Handle - Flask Clip - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 155 mm Material: stainless steel with a carbon fiber tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g