Safety cabinet CS105 BASIC CHEMISAFE

Baker Ruskinn Invivo2 500 Hypoxia Glovebox Workstation on Trolley This system was removed from a uni (more)versity lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). Both the CO2 & O2 sensors are functional. It is in good cosmetic condition internally and externally. The internal light would not work.Support trolley with castors 141 x 71 x 83cm (l x w x h)

Under-bench cabinet depth 51cm - Length 144cm Laboratory cabinet Length: 144cm Depth: 51cm Height: 7 (more)1cm In melamine 3 doors On casters (hidden by the finishing profile) In good condition Slightly oxidized hinges and some small traces of wear (see photos)

CABINET CSB63 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Division into 3 compartments for storing the different families of non-flammable chemicals separately - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - Compartment for ACIDS: 2 plasticized steel shelves - Compartment for BASES: 2 stainless steel shelves - Compartment for TOXIC SUBSTANCES: 2 painted steel shelves - For all, max load 40 Kg distributed evenly Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

CABINET CS 120 BASIC PLUS GLASS - CHEMISAFE - Completely made of 10/10 mm thick electrogalvanized st (more)eel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - One piece construction with adjustable leveling feet - Possibility of having 1, 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged or double layer doors - Lock and key - Door opening at an angle of 110° which allows the shelves to be pulled out without tilting them - Equipped with fixed or sliding retention shelves in plasticized/painted/stainless steel, with adjustable height - Possibility of having a retention tray on the bottom of the cabinet (see table alongside) - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards - Compliance with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3+3 shelves in plasticized steel (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

CABINET CSB60 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Division into 4 compartments for storing the different families of non-flammable chemicals separately - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards In dotazione: - Compartment for ACIDS: 2 plasticized steel shelves - Compartment for BASES: 2 stainless steel shelves - Compartment for TOXIC SUBSTANCES: 2 painted steel shelves - Compartment for HARMFUL PRODUCTS: 2 painted steel shelves - For all shelves: maximum load of 40 kg evenly distributed Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Yamato LT-500B Overhead Stirrer, 100-120V Speed Range 25~1200rpm Max Torque 0.6N•m (6.0kgf•cm) Moto (more)r DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with well-blanced speed and torque for medium viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Speed range 25~1200 rpm. INCLUDED: The Yamato LT-500B Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Agilent 1200 G1323B Handheld Control Module. Install any desired configuration of Agilent 1200 Serie (more)s modules. The control module software will reflect which modules are present in the LC system and adjust the screens accordingly. Enter parameter settings for every module, perform reset and on/off functions as well as calibration and configuration settings in a self-explanatory and intuitive way.Define automated analyses including methods, timetables, injector programs, method sequences and automated calibration settings using the control module.Protect your method from any inadvertent keyboard changes by setting method protection. Use PC cards to store and transfer methods and sequences between Agilent 1200 systems. Monitor all operations and error events using the self-updating logbooks. Use the context-sensitive on-line information system to get further information on all topics. Use the context-sensitive menu function to have the quickest access on related functions. Display data graphically using the Plot screen where as many as three different signal scan be monitored at the same time. Print in formation to a PCL3 compatible printer connected to the serial RS232 port of an Agilent 1200 module.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Scilogex DS-160/10 Generator Probe for D-160The Scilogex DS-160/10 Generator Probe for D-160 has a d (more)iameter of 10mm x length 120mm for solid/liquid media volumes from 1-250ml. To be used with D-160 Homogenizer. INCLUDED: The Scilogex DS-160/10 Generator Probe for D-160 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

0