Clean Air EF/B4 Biological Safety Cabinet

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab (more) where it was surplus to requirements. The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included. It is in reasonably good cosmetic condition internally and externally. Inside dimensions - D63 W120 H70cm Hours - 1078 1.2

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab (more) where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working. The unit powers up and both the fans and the white lights are working. There is no UV light fitted. It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit. Inside dimensions - D62.5 W120 H70cm Hours - 14001.4

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

This Labcaire Recirculating Class II Microbiological Safety Cabinet Model SC12R was remove (more)d from a university lab where it was surplus to requirements. The unit was last used 3 years ago and the lab are confident it was working when least used. The unit powers up and both the fan and white light work. There is no UV light fitted. It is in reasonably good cosmetic condition with some marks from use. The last inspection record recommends that the Pre-Filter is replaced Inside dimensions - D58 W120 H62cm

Selecta PREBATEM TFT refrigerated incubator. Digital. 36 L capacity. Temperature range from 5 ºC to  (more)60 ºC. Stability ±0.1°C, homogeneity ±0.3ºC. Forced ventilation. Microprocessor control. Two shelves. RS 232 output. Safety thermostat. Dimensions (W*H*D): external 650*600*490 mm; internal 400*300*300 mm. 54 kg. User manual. The Selecta PREBATEM TFT refrigerated oven for adjustable temperatures from 5°C to 60°C is used in thermal treatments of samples for drying, curing, cultivation or conservation at constant temperature. It is suitable for applications in biotechnology, bacteriology, plasma fractions, biology, enzymatic test, metrology, cosmetics, water analysis, among others.

Thermo Scientific MSC-Advantage Class II Biological Safety Cabinets (BSCs) combine safety and extrao (more)rdinary value with energy efficiency, reliability and usability. With proprietary airflow design and energy-efficient DC motors, the MSC-Advantage BSCs use up to 68% less energy than cabinets with traditional AC motors. The cabinets provide both personal and product protection from biological hazards and contamination while affording users with a comfortable and ergonomic workspace. Cabinets are certified to EN 12469 safety standard. Certifications/Compliance: EN 12469, by TüV Nord, LNE (0.9 and 1.2m). EN 12469, by TüV Nord (1.5 and 1.8m) Noise Level: <59 dBA Exhaust Air Filter: HEPA H 14 EN 1822, 99.995% at 0.3 µm Particle Dimensions (WxDxH): 1900 x 800 x 1520 mm Interior dimensions (WxDxH): 1800 x 780 x 465 mm Including support frame

Pakawaste VB56 Vertical Cardboard Baler Machine This unit was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition, but unable to test due to the required Key not being included. The client stated the following: "No keys were supplied with them, they were working up until they were switched off and have not been powered on since. Stopped using them as health and safety told staff to no longer use"

Selecta Agimatic N hot plate stirrer of 10 L capacity. 60-1600 rpm. Temperature range: from 50ºC to  (more)350ºC. 14.5 cm diameter stainless steel plate. Analog speed and heat control from 0 to 100%. Indicators with light. Selecta Agimatic N hot plate stirrer is a compact and efficient device that can be easily placed on a laboratory table. With its 10 liter capacity, it is ideal for heating liquids in a uniform and controlled manner in research and experimental environments. 50Hz 220 V 3A 306 W

Ohaus Guardian 5000 e-G52HS10C Hotplate Stirrer, 120V Temperature Range Ambient +5°C to 500°C Speed  (more)Range 50 rpm to 1,800 rpm Capacity 22 L Features - Heating and stirring capacity up to 22 L with reliable performance - Temperature range from ambient +5°C to 500°C for versatile applications - Wide speed range of 50 to 1,800 rpm for flexible mixing - 10 x 10 inch ceramic plate for consistent heat and stir support - High-contrast LCD display for clear monitoring of settings - Ethernet, USB, and RS232 options for enhanced connectivity - CE and TUV certified for reliable safety standards - Integrated timer adjustable from 1 minute to 99 hours, 59 minutes The Ohaus Guardian 5000 e-G52HS10C Hotplate Stirrer, 120V, is designed to deliver dependable heating and stirring for demanding lab applications. With a large 10 x 10-inch ceramic plate, it provides consistent heat distribution up to 500°C and stirs up to 22 liters with precision, making it ideal for a range of research and industrial settings. The speed range of 50 to 1,800 rpm accommodates various stirring needs, from gentle to intense mixing. Equipped with a high-contrast LCD display for easy monitoring, this model also features Ethernet, USB, and RS232 connectivity options for streamlined data management. The Guardian 5000 prioritizes safety with CE and TUV certifications and offers a programmable timer from 1 minute to 99 hours and 59 minutes, making it a versatile and user-friendly choice for advanced lab workflows. INCLUDED: The Ohaus Guardian 5000 e-G52HS10C Hotplate Stirrer, 120V includes: - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7&#39;&#39; colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale&#39;s operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7&quot; colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company&#39;s branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 13 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 2 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.