Mettler Toledo Titrator Model - DL21 Lab

SCHOTT 10ml TZ 1210 syringe for titrator Reference: 312

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titra (more)tion. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples, or those that react with the KF reagent.

The Schott titration device type T80-20 is ideal for carrying out manual titrations and dosing using (more) the simple push-button operation. This device can be used, among other things, for equivalence point determinations. Burette capacity: 20mL Dimensions (WxDxH): 130 x 200 x 290 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Mettler Toledo DO308 Karl Fischer Titration Drying Oven This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Specac Silver Gate Evolution Single Reflection ATR Spectroscope Accessories Lab This item was remove (more)d from a university where it was surplus to requirement. It is in very good cosmetic condition and in good mechanical order, we are unable to test it further at our facility. Also included are the following: 1 x ZnSe flat crystal top plate assembly Part No. 10683-1 1 x Bottom plate with prism Serial No. H20662 1 x Flat anvil Part No. 10567 1 x Concave pellet anvil Part No. GS10532 2 x User Manuals 1 x Original Storage Hard Case

Memmert IF110plus Forced Circulation Incubator 108L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 108 L (3.8 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF110plus Forced Circulation Incubator 108L, 115V offers a precise working temperature range starting from Min. 10°C above ambient up to +80°C with 0.1°C accuracy, ensuring optimal environmental conditions for laboratory processes. Its spacious 108 L (3.8 cu.ft.) stainless steel interior is designed for durability and ease of cleaning, making it ideal for routine use in demanding lab environments. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, equipped with two high-definition TFT-color displays, allows users to easily monitor and adjust key parameters like temperature, fan speed, and air flap position, all with intuitive control. For enhanced safety, the IF110plus features AutoSAFETY with integrated over- and undertemperature monitoring and a mechanical temperature limiter TB for additional protection. The Function SetpointWAIT ensures the process begins only once the desired temperature is reached, increasing precision. Additionally, the incubator includes a fixed sterilization program, which operates at 160°C for 4 hours to clean the chamber. With forced air circulation, adjustable in 10% steps, and the ability to manage fresh air admixture, this incubator is both efficient and reliable for various laboratory applications. INCLUDED: The Memmert IF110plus Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Accuris PR2100-C-250 qMAX cDNA Synthesis Kit, 250 Reactions The original Accuris cDNA Synthesis Kit  (more)is a 2-tube format for easy reaction set up and is ideal for 4pg to 0.5µg of input RNA. One tube includes our exceptionally stable Reverse Transcriptase combined with a potent RNAse inhibitor, and the other tube contains a 5X reaction buffer with an optimal mixture of anchored oligo (dT) primers and random hexamers to produce a nonbiased population of cDNA. INCLUDED: The Accuris PR2100-C-250 qMAX cDNA Synthesis Kit, 250 Reactionsincludes: - 250µl of 20X RT in 25µl aliquots - 1ml 5X buffer in 100µl aliquots - Manufacturer's Documentation - 2 Year Manufacturer's Warranty