CAS BioMAT 2 Class 2 Microbiological Safety Cabinet Lab

Average inflow airflow: 0.45 m/s Average downward airflow: 0.30 m/s Inflow airflow volume: 524 m³/h  (more)Downflow (70%) airflow volume: 1258 m³/h Exhaust (30%) airflow volume: 524 m³/h Internal dimensions (WxDxH): 1870 x 623 x 670 mm Usable work surface: 0.9 m² Dimensions (WxDxH): 2030 x 815 x 1540 mm Base height (min/max): 711/864 mm Noise emission: < 61 dBA Fluorescent lamp intensity: > 1150 Lux Weight: 350 kg

Front aperture (work mode)(HxL): 165 x 1800 mm Front aperture maximum height: 350 mm Dimensions (wit (more)hout support frame and filter unit)(LxDxH): 1943 x 844 x 1552 mm Height with support frame: 2297 mm Interior dimensons (LxDxH): 1800 x 605 x 725 mm Work area(LxD): 1719 x 440 mm Weight (without support frame and filter unit): 315 kg

Dimensions (WxDxH): 1300 x 860 x 2300 mm Internal dimensions (WxDxH): 1200 x 585 x 700 mm Must be co (more)nnected to an extraction channel.

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E &nbsp;Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light &amp; UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

CAS BioMAT 2 Class 2 Microbiological Safety Cabinet Lab This was removed from a laboratory where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Calibration date due: 28:02:2024. Filter details:Camfil MX14-1130X500X90.Size: 1130x500x90.Nominal Airflow: 915m3/h.Pressure Drop 92 Pa Efficiency 99.9993.Filter Class: H14 EN1822.Serial No: 111074-48187. Camfil MX14-800X320X66.Size: 800x320x66.Nominal Airflow: 415m3/h.Pressure Drop 125 Pa Efficiency 99.998.Filter Class: H14 EN1822.Serial No: 110617-46187.

Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab This item was removed from a (more) university lab where it was surplus to requirements. The unit powers on and the fan, airflow, UV, white light, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 150cm Includes:-Manual-Stand for unit

This listing is for 1 of 2 Amersham Biosciences Ultrospec 10 Cell Density Meter. The unit is in ful (more)l working condition and is ready for immediate release. Supplied with power cables. The Amersham Biosciences Ultrospec 10 Cell Density Meter is a compact, portable, and user-friendly device designed for accurate measurement of cell density in suspension at 600 nm. Ideal for laboratory environments, this instrument is perfectly suited for tracking the growth rates of various cell types, including E. coli and yeast. The Ultrospec 10 provides rapid, reliable measurements, making it a key tool in any microbiology or cell culture lab. The device utilizes a 600 nm LED source combined with advanced fiber optic technology to deliver precise optical density (OD) readings, ensuring dependable results every time. Its small, portable design allows it to be used in a variety of environments, including incubation cabinets, anaerobic chambers, and other cell culture areas, offering great flexibility to researchers. Powered by batteries, the meter is incredibly convenient for on-the-go use, and its smooth surface makes cleaning and sterilization hassle-free. For additional data management, the meter allows users to download results to a PC or printer for easy storage, analysis, and retrieval. Key Features: 600 nm LED Source: Delivers accurate optical density measurements through advanced fiber optics technology. Compact and Portable: Lightweight design for use in various locations, including incubation cabinets and anaerobic chambers. Battery Operated: Cordless operation for flexibility and convenience in any laboratory setting. Easy to Clean: Smooth surface design ensures easy sterilization and contamination prevention. Data Management: Results can be downloaded to a PC or printer, making it easy to store, track, and analyze data.

CS Bio Co. Peptide Synthesizer With Control Unit Model CS336X This item was removed from a universit (more)y lab where it was surplus to requirements. The unit is in very good cosmetic condition and powers on. However, no further testing was conducted as the PC and control software are not included. Features:- Auto sampler with 36 holder wheel and injector - Full set of solvent bottles: 1 x 2-litre bottle, 4 x 1-litre bottles, 1 x 1/2-litre bottle Also Included:- CS Bio Control System (Serial No.: 130501) - Mean Well 12v Power Supply (Serial No.: EB3152797) - 3 x data cables - 1 x 12v cable for light Model: CS336X Serial No.: 130501

Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V Temperature Range -1 (more)0°C to +50°C Temperature Distribution Accuracy ±1.0°C (refrigerator in continuous operation at 37°C) Chamber Volume 286L Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W) - Interior light for better sample visibility (IN604W/804W) - Optional slide shaker table available to put in and take out samples easily (IN604W) Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Operating temperature range: -10~ + 50° C INCLUDED: The Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V includes: - 5 x Shelves w/ 10 Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

M1 Mass Standard - knob weights - set (1 mg - 500 g), wooden box.

Made of transparent plastic, secures a display against scratches, dust etc. Intended for X2 balances (more). Set - 10 pcs.