Climate-controlled cabinets and enclosures

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

This was removed from a university lab where it was surplus to requirements. The room is currently d (more)isassembled and for collection only in Bedwas, Caerphilly UK Everything is in good cosmetic condition with minor marks. It was in good working order prior to disassembly. Double doorway entry: 2x Sliding Doors:5x doorway wall panels: Perspex panels:•14x 105 x 98cm white panels•1x 105 x 98cm clear panel•2x 118cm x 104 cm white panels• 4x 115 x 96cm thicker white panels• 7x 96 x 96cm thicker white panels Rubber Seals:The seals go around the perspex panelling. -as seen in photos. 22x large rubber seals4x smaller rubber seals 1x Monmouth Circulaire air vent:Model WCAM 2250Air Vent Dims:D47cm x W102cm x H96cm 2x Air Vent Legs:The units are in good cosmetic condition and are adjustable. 1x Monmouth Scientific ON/OFF Switch: Aluminium Frame:6mm Hex Key to be used to attach and tighten sections together •2x lengths of 317cm x5cm•4x lengths of 196cm x 5cm1x length of 217cm x 5cm5x lengths of 230cm x 3cm

MEMMERT ICH750eco climatic chamber - 750 litres ICH model: Incubator / drying oven with humidity con (more)trol Tested at 35°C / 65% humidity Year of manufacture: 2019 Non-refrigerated chamber (non-functional refrigeration unit) Temperature range: Ambient temperature + 10°C to 60°C Temperature delta, regulation: ± 2°C Adjustable useful humidity (% rh): 10 to 80 Volume: 749 litres Case: stainless steel exterior and interior Double glazed interior doors Intuitive, touch control interface and programmable settings 40 mm diameter access port at the rear as standard Models on casters Operation: with distilled water Supplied with 2 stainless steel grids and water tank External dimensions L x D x H (mm): 1224 x 834 x 1950 Internal dimensions L x D x H (mm): 1040 x 600 x 1200 Weight: 249 kg Power: 1350W Capacity Maximum load per tray (kg): 30 Maximum load per device (kg): 200 Equipment tested at: 35°C - 70% humidity 50°C - 50% humidity Test possible with your values ​​on request

Hersteller: Testo Modell: testostor 171-3 Interner Feuchte-/Temperatursensor mit Langzeit-DATALOGGER (more) S/N: 90874770083 Beschreibung: Der testostor 171-3 ist ein kompaktes Messdaten-Speichergerät mit internem Feuchte-/Temperaturfühler zum schnellen Platzieren direkt am Messort.Die gespeicherten Daten können mit dem Testo-Protokolldrucker vor Ort protokolliert oder mittels Interface (Schnittstelle) und der Software auf dem PC ausgewertet werden. Kernmerkmale: • Aufsteckbare Anzeige, Messwerte vor Ort kontrollieren• Kontroll- und Abgleichmöglichkeit durch Abgleichset• Messrate: 2 sec bis 24 h frei wählbar• Einfacher Batteriewechsel• DKD-Kalibrierung möglich• Sinterkappenschutz für staubhaltige Umgebung (siehe Zubehör)• Geeignet für den Außenbereich• Schutzklasse IP65• Datenauswertung auf PC Spezifikationen NTC Fühler: Fühlertyp:   NTC Messbereich:  -10 ... +50 °C Genauigkeit:   ±0.5 °C (-10 ... +39.9 °C) // ±0.6 °C (+40 ... +50 °C) Auflösung:   0.1 °CBetriebstemp.:   -20 ... +70 °CLagertemp.:   -40 ... +85 °CSpeicher:    20000 Gehäusematerial:  Aluminium, eloxiertBatterietyp:   Lithium-Batterie (neue Batterie eingesetzt)Abmessung:   131 x 68 x 84 mmGewicht:    320 g Spezifikationen Feuchtesensor kapazitiv: Messbereich:  0 ... +100 %rFGenauigkeit:   ±3 %rF (+2 ... +98 %rF)Auflösung:   0.1 %rF Schutzklasse:  IP65 Messrate:    2 sec bis 24 h frei wählbarBatteriestandzeit:  bis zu 5 JahrenSoftware:    Menügeführt ab Microsoft Windows 95 / NT 4 Servicepack 4 Lieferumfang: - Testo Testostor 171-3 Feuchte-/Temperatursensor DATALOGGER- Wandbefestigungsmagnet- Auswertestation inkl. Verbindungskabel für PC Anschluss- Software zur Auswertung der Loggerdaten mit graphischer Darstellung am PC- Bedienungsanleitung komplett- Aufbewahrungskoffer Das Temperaturmessgerät befindet sich in einem guten Zustand und ist 100% auf Funktion geprüft.

CABINET CSB60 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 3 plasticized steel shelves (max load 40 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE B B (more)eing able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

LED illuminated shelves Homogeneous illumination and constant temperature ensure the same conditions (more) between the different samples, on the entire shelf. FOC 200IL is ideal for a wide variety of applications including plant growth, seed germination, cultivation, insect and small animal husbandry, cultured bacteria and fermentation studies FOC200IL is equipped with 2 illuminated shelves each consisting of six LED bars mounted horizontally in the lower part, so as to illuminate the shelf below. It is also equipped with a timer for the lights. Thermoregulation and thermal stability at their best - The Auto-Tuning thermoregulation system guarantees excellent thermal homogeneity and stability (± 0.5°C) - Ecological cooling system and low operating costs - Selectable incubation temperature and working range from 3°C to 50°C - Uniform temperature thanks to VELP ventilation technology - 3-digit DIGITAL DISPLAY, resolution 0.1°C - Transparent internal door for observation of the sample without temperature alterations - Customizable lighting cycle timer - Equipped with 2 illuminated shelves (30,000 lux / shelf), each with six LED bars mounted horizontally under the shelf - Volume of 169 liters net - Internal sockets to power devices - Intuitive digital interface, with three buttons for easy setup of the instrument - Constant monitoring according to GLP (Good Laboratory Practice) - Adjustable recording time (in case of connection to VELP Ermes and TempSoft ™) - The optional TempSoft ™ incorporates high / low alarm thresholds - Quick and easy calibration - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with Good Laboratory Practice (GLP)

CABINET CSB60UB - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm th (more)ick electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 2 ripiani realizzati in acciaio plastificato (carico max 40 Kg distribuiti uniformemente) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

CABINET CSB120 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thi (more)ck electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards In dotazione: - 3 plasticized steel shelves (max load 80 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

CS 120UB PVC - CHEMISAFE UNDERCOUNTER CABINET - Completely made with a thickness of 18 mm in HD PVC  (more)- Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - AUTOMATIC DEFROSTING function - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of the models. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase your possibilities with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In video, the animation shows the ST2 refrigerated incubator with the possible shelves available: shelf with compartments; perforated shelf; grill shelf. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubatorwith quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

CS 60 PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extractor cove (more)r and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Door open alarm - Ventilation

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

Memmert ICP 400 cooled Incubator. Temperature range from 0ºC up to +60ºC. Model Size 53 L. Stainless (more) steel. Closed air jacket heating on all sides. Motorised ventilation in the working chamber adjustable in 10% steps (20%-100%) through controller. Highly efficient automatic defrosting system. Microprocessor 3 point controller. Multi-functional programming (menu on 5-digit-LED digital display) of a nearly unlimited number of ramps. Serial interface RS232 incl. The Memmert ICP 400 cooled incubator is a high-quality piece of equipment designed to offer precise temperature control in laboratory applications. With its integrated cooling system, this oven allows you to maintain a constant and uniform temperature inside, making it ideal for storing and cooling sensitive samples. In addition, it has a large capacity of 400 liters and an intuitive interface that makes it easy to use and program. With the Memmert ICP 400 cooled incubator, you can guarantee the integrity and stability of your samples at all times.

Kendro Heracell C02 incubator. Air jacket. Capacity 151 L. Temperature range from ambient + 3ºC to 5 (more)5°C. ContraCon 90 ºC decontamination routine. Constant humidity: =/>95%rH. CO2 control range from 0 to 20% by volume. Overtemperature protection. Stainless steel interior with 3 trays and 2 drip trays. Foil control panel with digital display. Interface RS 232. Dimensions (WHD):  internal 470*607*530 mm, external 637*867*760 mm. Power 230 V. 50/60 Hz. 550 W. User manual. The Kendro / Heraeus HERAcell 150 CO2 Incubator is the ideal CO2 incubator for cell and tissue cultures, including development of ova or embryos at or near body temperature. It provides everything needed to protect and grow the user's samples, including safe and stable incubation conditions to ensure optimum culture growth. HERAcell incubators use a ContraCon 90°C decontamination routine which decontaminates the entire chamber interior and is proven to eliminate mycoplasma as well. Also, they are enhanced with an air jacket to maintain temperature uniformity and quick set-up time, as well as direct humidification which offers the fastest humidity recovery times and provides optimal growth conditions for cultures.

Growth chambers Faithful FPG Series. Capacities: 250 L (FPG-250), 350 L (FPG-350) and 450 L (FPG-450 (more)). Programmable 4-sided full spectrum LED lighting. Power from 0 to 30000 LX depending on the model. Forced ventilation. Temperature ranges: 10 to 65ºC (lighting); 0 to 65ºC (without lighting). Resolution 0.1ºC. Stability ± 1ºC. Uniformity ± 1ºC. Humidity range 40% - 95%. Humidity stability ± 5% RH. Stainless steel. Anti-frost. 7 "touch screen. Curves display. Automatic control of humidity / temperature during the photoperiod programmable by cycles. Timer 0-99.9 h / cycle. Overtemperature control. Includes 4 shelves. CE marking. Opcional: Light barrier, USB, printer, wireless SMS alarm, CO2 concentration control The price shown corresponds to the 250 L model (FPG-250). For other volumes use the dropdown. Labinstruments FPG Series Plant Growth Chambers are more accurate thanks to their adjustable four-sided LED lighting, forced ventilation for greater temperature stability, and a separate humidity generation system for more precision. Programmable cycles.