Telstar EF 4 Biological Safety Cabinet

The Esco Infinity Class II Biological Safety Cabinet (BSC), model FC2, offers superior protection to (more) the cabinet operator, product and the environment. With over 20 years of experience in safety cabinet technology, the Esco FC2 cabinet brings you the optimum combination of safety, performance and serviceability with an enhanced ergonomic design. Class II cabinets provide product, operator and environmental protection making them suitable for general microbiological work with agents assigned to biosafety levels 1, 2, and 3. With their diverse range of applications, class II cabinets are the most cost-effective systems on the market. The Infinity Class II BSC is designed, built and tested to comply with Australian Standard AS 2252.2 performance requirements and European Standard EN12469. External Dimensions (LxWxH): 1420 x 805 x 1535 mm Internal Work Zone (LxWxH): 1260 x 610 x 670 mm Tested Opening: 175 mm Inflow Initial setpoint: 1.10 m/s Downflow Initial setpoint: 0.41 m/s HEPA Filter Efficiency: >99.99% at 0.3µm Sound According to EN12469: <65 dBA Fluorescent Lighting: >1200 Lux, measured at work surface level (zero background) as per NSF49 test grid UV-interlock ensures that the UV lamp is deactivated when the sash is not fully closed. Main Body Construction: 1.2mm thick gauge electro-galvanised steel with Isocide anti-microbial white oven-baked epoxy-polyester powder-coated finish Net Weight: 298 kg

This Labcaire Class II Biological Safety Cabinet&nbsp;Model - BH12 was removed from a university lab (more) where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working. The unit powers up and both the fans and the white lights are working. There is no UV light fitted. It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit. Inside dimensions - D62.5 W120 H70cm Hours - 14001.4

CAS BioMAT 2 Class 2 Microbiological Safety Cabinet Lab This was removed from a laboratory where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 29:02:2024. Internal Depth (cm) 106.0Internal Width (cm) 44.0Internal Height (cm) 51.0

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions -&nbsp;D54 W106 H70cm

Faster SafeFAST Classic 212 Class 2 Microbiological Safety Cabinet This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and operates but the UV bulb will need replacing. It is in good cosmetic condition with minor marks. Operating time - 20252:04UV Hours - 4998:54

GT Sonic VGT-1200 ultrasonic cleaner. Capacity 1300 mL. Frequency 40kHz. Power 60 W. SUS304 Stainles (more)s Steel Tank. 5 cycle timer: 180s-280s-380s-480s-90s. Tank size (L×W×H) 175*145*70mm. The GT Sonic VGT-1200 ultrasonic bath is specially designed for dental clinics and laboratories. Its programmable high-power ultrasound achieves superior cleaning in all types of objects. It has a transparent lid with blue light to see the cleaning process.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: Ambient +5ºC to 70ºC Temperature variation: ±0.2ºC Temperature setability: 1ºC Te (more)mperature deviation (spatial): ±1.5ºC Heating up time to 37ºC: 33 min Fan speed control: 4 Max load per shelf: 20 kg Maximum load total: 70 kg Capacity: 133 L Internal dimensions (WxDxH): 545 x 430 x 600 mm Dimensions (WxDxH): 705 x 625 x 820 mm Weight: 56 kg

Binder CB 150 CO2 Incubator This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition. This item does not power on, therefore it is sold as Spares or Repairs.

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

Benchmark Mortexer Vortex MixerThe Mortexer™ is MORE than your standard vortex mixer. The unique des (more)ign of the Multi-Head™ (included) features a traditional cup head for general purpose mixing, plus holds up to eight microcentrifuge tubes. The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. Increased speed, up to 3400 rpm produces an instant vortex of even the largest sample sizes, including full 50ml tubes. Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls. INCLUDED: The Benchmark Mortexer Vortex Mixer includes: - Unique Multi-Head - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty